1110i bandel ga mau di flash

Discussion in 'MxKey Dongle' started by BODREK, Jul 3, 2008.

Thread Status:
Not open for further replies.
  1. BODREK

    BODREK New Member

    Messages:
    50
    Likes Received:
    1
    Trophy Points:
    0
    1110i mati, saya backup rpl bisa, tapi ga mau read PM. terus saya erase dan flash. ini log after flash nya. hp tetap local mode lho. mungkin mas yopie atau lainnya bisa bantu?:):)


    ASIC ID: 0x2201 [UPP_v2.2x]
    u_2nd.fia: [DCT4] version: 4.70.1 revision: 0.7 size: 0x9A0
    Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
    FlashID0: 0089 8872 [Intel] page size: 64 K type: NOR area: 01000000-01FFFFFF
    FlashID1: 0000 0001 [unused/removed]
    ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
    u_intel.fia: [DCT4 ALGORITHM] version: 4.70.1 revision: 0.7 size: 0x5538
    Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
    Performing Flash Authentication ...OK
    UEM ID: 004E358B:2984DA60
    ASIC type: 2
    UEM Imei: 35697901613799
    Flash Imei: 35697901613799
    RPL backup saved to "C:\mobileEx\3.0\data\backup\RPL\35697901613799_back.rpl"
    Processing file: rh93_06.010
    ASIC ID: 0x2201 [UPP_v2.2x]
    u_2nd.fia: [DCT4] version: 4.70.1 revision: 0.7 size: 0x9A0
    Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
    FlashID0: 0089 8872 [Intel] page size: 64 K type: NOR area: 01000000-01FFFFFF
    FlashID1: 0000 0001 [unused/removed]
    ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
    u_intel.fia: [DCT4 ALGORITHM] version: 4.70.1 revision: 0.7 size: 0x5538
    Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
    Performing Flash Authentication ...OK
    UEM ID: 004E358B:2984DA60
    Programming MCU ...
    rh93_06.010: [DCT4][DCT4 ALGORITHM] (1.90 MB)
    Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201, 2031, 2030, 2032, 2033
    Area [01000000-0100FFFF] erased in 0.578 s
    Area [01010000-013BFFFF] erased in 32.797 s
    Area [013C0000-013EFFFF] erased in 1.922 s
    Area [017C0000-017EFFFF] erased in 0.046 s
    Area [01FC0000-01FEFFFF] erased in 0.063 s
    Flash programming ...
    Programming completed in 15.546 s
    File Processed in 58.281 s
    Processing file: rh93_06.01mb
    Boot error: 03 00 00 72
    UPP not responding !
    - Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
    - Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
    - On rare occasions phone might be damaged or dead. So, if possible, try with another phone.

    Flashing done with error(s) in 2 min 6.438 s

    Total time to process is 2 min 7.844 s
     
  2. hswik

    hswik New Member

    Messages:
    62
    Likes Received:
    34
    Trophy Points:
    0

    PAkai Beta 10 ya???
    Aku juga Sering begitu.....Sambil Nunggu Updetan Aku PAkai Beta 8....OK Punya...
    Hanya setting Bulan di Kompi dimundurin 3 Bulan..ke April, kalau ndak...ada pesan Your Aplication was expired.
     
  3. BODREK

    BODREK New Member

    Messages:
    50
    Likes Received:
    1
    Trophy Points:
    0
    oh ya,waktu saya nyalakan hp nya cuma hidup logo nokia trus mati. gimana ya cara programnya? apa tembak rpl aja?
    mohon pencerahannya dong para suhu...:):):)
     
  4. BODREK

    BODREK New Member

    Messages:
    50
    Likes Received:
    1
    Trophy Points:
    0
    akhirnya,1110i saya berhasil saya flash setelah saya instal mobileEx v11. hp sudah normal kembali....:D:D:D
     
Thread Status:
Not open for further replies.

Share This Page