N70 error write...

Discussion in 'BB5' started by ajunkzy, Aug 26, 2008.

  1. ajunkzy

    ajunkzy New Member

    Messages:
    131
    Likes Received:
    38
    Trophy Points:
    0
    bos...tolongin saya dong.ini ada n 70 blank putih.saya coba flash tp gagal waktu writenya.karang hpnya jd mati total.ini hasil log dari jaf.

    JAF version 1.98.54
    Detected PKEY: 9000DC34
    Card life counter: 95.53%
    P-key nokia module version 01.02
    Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30107
    JAF DCT4/BB5 LOADERS DIR: f:\Program Files\ODEON\JAF\Flash\
    JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
    JAF USB LOADERS DIR: f:\Program Files\ODEON\JAF\FlashUSB\
    JAF DCT3/DCTL LOADERS DIR: f:\Program Files\ODEON\JAF\Flash3\
    USB Cable Driver version: 7.0.2.0
    Changing mode...Done!
    Booting phone...
    APE Boot Data:
    Asic ID: 17100701
    Asic Mode ID: 00
    Asic Public ID: 196CEAF54BDFB254FAF598DAECCC38E6DCEF941C
    HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
    ROM ID: AB5E4ADB27A06946

    CMT Boot Data:
    Asic ID: 000000010000022600010006000C192101002200
    Asic Mode ID: 00
    Asic EM ID: 00000352
    Asic Public ID: 18E00115AAAE4951502AC8C01434E11DB0E48150
    HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
    ROM ID: F28A211FCEA7B19D
    CMT Boot File: f:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
    Loader version: 01.15.00 -> Revision: 0000
    Patching CMT boot step2...
    CMT Boot Ready
    CMT Flash ID: 225000EC <=> SAMSUNG (SEC) -> K8S6415ETB
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: f:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
    Loader version: 01.21.01 -> Revision: 0000
    CMT Loader Ready
    APE Boot: f:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
    Loader version: 01.23.00 -> Revision: 0000
    Patching APE boot step2...
    APE Boot Ready
    APE Flash ID: 003600EC <=> SAMSUNG (SEC) -> K5E1212ACM
    APE Flash Data: 00020000000600000000000000000000
    Done!
    Restarting phone...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 05wk07v41
    08-02-06
    RM-84
    (c) Nokia.
    HW version: 6012
    PCI version:
    RFIC version:  150a160e
    DSP version: rolf_05wk07v24
    Retu version: 32
    Tahvo version: 52
    Production serial number: SVJ201759
    Product code: 0536964
    Module code:
    Basic production code: 0522156
    Flash code:
    Order number:
    Product specific data:
    Long production SN:
    ATO:
    Default SN type:
    IMEI plain: 359380004439298
    IMEI spare to net: 3A 95 83 00 40 34 29 09
    IMEI SV to net: 33 95 83 00 40 34 29 09 F6

    LOCK STATUS:

    CONFIG KEY: 0000000000000000
    PROVIDER KEY: 2440700000000000
    Provider: AT&T;U.S.A. (3650)
    Key Code count: 0, FBUS Code count: 0

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Searching for saved ini...
    Checking for file f:\Program Files\ODEON\JAF\JAF_RM-84.ini
    Saved INI not found, loading INI list...
    Setting local mode...
    Reading product code...
    Product Code: 0536964
    INI file 0536964.ini is missing. Continue searching for second ini type...
    No ini files found...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: ?
    Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.C0
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.C0
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50705301.V12
    CNT Flash file: NONE
    APE Variant file: NONE
    Backing up CRT data...
    Setting FLASH MODE
    Loader version: 01.15.00 -> Revision: 0000
    Patching CMT boot step2...
    CMT Boot Ready
    Loader version: 01.21.01 -> Revision: 0000
    CMT Loader Ready
    Reading CMT NPC certificate...
    Reading CMT VARIANT certificate...
    Reading CMT CCC certificate...
    CCC not available...
    Reading CMT HWC certificate...
    HWC not available...
    Saved to f:\Program Files\ODEON\JAF\ProgData\35938000443929_CRT_backup_1844268.rpl
    Backup CRT OK!
    Backing up SIMLOCK data...
    Setting local mode...
    Reading IMEI...
    f:\Program Files\ODEON\JAF\ProgData\359380004439298_CRT_backup_1844268.pm
    Done!
    Backup LCK OK!
    Manual mode selected, version can't be checked!
    Booting phone...
    APE Boot Data:
    Asic ID: 17100701
    Asic Mode ID: 00
    Asic Public ID: 196CEAF54BDFB254FAF598DAECCC38E6DCEF941C
    HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
    ROM ID: AB5E4ADB27A06946

    CMT Boot Data:
    Asic ID: 000000010000022600010006000C192101002200
    Asic Mode ID: 00
    Asic EM ID: 00000352
    Asic Public ID: 18E00115AAAE4951502AC8C01434E11DB0E48150
    HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
    ROM ID: F28A211FCEA7B19D
    CMT Boot File: f:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
    Loader version: 01.15.00 -> Revision: 0000
    Patching CMT boot step2...
    CMT Boot Ready
    CMT Flash ID: 225000EC <=> SAMSUNG (SEC) -> K8S6415ETB
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: f:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
    Loader version: 01.21.01 -> Revision: 0000
    CMT Loader Ready
    APE Boot: f:\Program Files\ODEON\JAF\Flash\helen3_2nd.fg
    Loader version: 01.23.00 -> Revision: 0000
    Patching APE boot step2...
    APE Boot Ready
    APE Flash ID: 003600EC <=> SAMSUNG (SEC) -> K5E1212ACM
    APE Flash Data: 00020000000600000000000000000000
    APE Loader: f:\Program Files\ODEON\JAF\Flash\h3_sam_nand_gbbm.fg
    Loader version: 01.21.00 -> Revision: 0000
    Patching APE loader step2...
    APE Loader Ready...
    Operation took 0 minutes 9 seconds...
    Sending CNF Data...
    Erasing...
    Operation took 0 minutes 39 seconds...
    Writing...
    Stage 1
    Sending CMT HASH for NOLO
    CMD ID: 0x5d,0x27
    Error write...


    trus saya coba pake mx key,tp gagal juga.

    Processing file: RM84_50705301.C0
    APE Data :
    SYSTEM ASIC ID: 17100701
    ASIC MODE ID: 00
    PUBLIC ID: 196CEAF54BDFB254FAF598DAECCC38E6DCEF941C
    ROOT KEY HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
    ROM ID: AB5E4ADB27A06946
    RAP Data :
    SYSTEM ASIC ID: 000000010000022600010006000C192101002200
    EM1 ASIC ID: 00000232
    EM2 ASIC ID: 00000352
    PUBLIC ID: 18E00115AAAE4951502AC8C01434E11DB0E48150
    ASIC MODE ID: 00
    ROOT KEY HASH: E9EFF4BFAA5393217CA6B17755FC3E14
    ROM ID: F28A211FCEA7B19D
    rap3gv2_2nd_fps8.fg: [BB5] version: 1.12.5 revision: 0.0 size: 0x3D00
    FlashID0: 00EC 2250 - 0000 0121 [Samsung K8S6415ETB] type: NOR
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    RAP3Gv3_algo_fps8.fg: [BB5 ALGORITHM] version: 1.12.5 revision: 0.0 size: 0xFC00
    RAP PAPUBKEYS ID is blank/erased.
    helen3_2nd.fg: [BB5] version: 1.35.0 revision: 0.0 size: 0x3500
    FlashID0: 00EC 0036 - 00A5 00C0 [Samsung NAND K5E1212ACM] type: NAND
    ALG [35]: OMAP1610 GBBM-1.8.1 ALG
    ExtBUSC: 0002 0000 0006 0000 0000 0000 0000 0000
    h3_sam_nand_gbbm.fg: [OMAP1610 GBBM-1.8.1 ALG] version: 1.33.0 revision: 0.0 size: 0xA908
    APE PAPUBKEYS ID: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
    Programming MCU ...
    RM84_50705301.C0: [BB5][BB5 ALGORITHM][BB5][OMAP1610 GBBM-1.8.1 ALG] (29.40 MB)
    Total erase size: 68.92 MB
    RAP NOR area [00000000-0052B469] erased in 3.281 s
    RAP NOR area [006A0000-006BFFFF] erased in 0.046 s
    RAP NOR area [006DF000-006EFFFF] erased in 0.063 s
    RAP NOR area [00700000-007EFFFF] erased in 0.171 s
    APE NAND area [00000000-0000FFFF] erased in 0.063 s
    APE NAND area [00010000-0001FFFF] erased in 0.062 s
    APE NAND area [00020000-000203FF] erased in 0.047 s
    APE NAND area [00050000-03ECFFFF] erased in 6.281 s
    Flash programming ...
    Error while programming 0x000A0400, Result: 0000
    Flashing done with error(s) in 58.469 s

    Total time to process is 59.860 s


    kira-kira permasalahny dmn ya bos...?:confused:
     
  2. willydewi

    willydewi Member

    Messages:
    35
    Likes Received:
    9
    Trophy Points:
    18
    cek kabel flash nya dulu bos :)
     
  3. ant85

    ant85 Active Member

    Messages:
    140
    Likes Received:
    77
    Trophy Points:
    38
    sambil di charge bozzz pas flashing nya
     
  4. ajunkzy

    ajunkzy New Member

    Messages:
    131
    Likes Received:
    38
    Trophy Points:
    0
    tengkyu bos...
    tp kabel masih bagus koq...di pake di hp lain mau jalan.
    cm pertamany hp ni blank putih error ape,saya coba pake teknik jumper dgn menghilangkan dua konmponen hitam kecil yang deket combo memory dan yang deket konektor board.hp mau normal cm 1 hari.setelah itu hp jadi mati-matian ketika di pake sms.kemarin saya coba flash hasilnya seperti di atas,dan sekarang keadaan hpny gak mau hidup.
    gmnaain ini bos...tolong...:pray::pray::pray:
     
  5. onet

    onet New Member

    Messages:
    28
    Likes Received:
    6
    Trophy Points:
    0
    Spertinya file flash nya kurang tinggi bos...

    Asal punya Backup rpl + simlock nya sih bgsnya :
    - full erase
    - full flash
    - write rpl backup

    Mungkin bs lsg tulis bon.. Xixixixi..:D:D
    Soalnya HARDWARE terbaca/terdeteknya BAGUS semua tuh boss..
     
  6. dj.orion

    dj.orion Super Moderators Super Moderator

    Messages:
    3,109
    Likes Received:
    5,147
    Trophy Points:
    123
    Di coba upload kesini Check dg UFS n JAF dg FBUS Cable (bkn USB) :)..
    Code:
     Sending CMT HASH for NOLO
     CMD ID: 0x5d,0x27
     Error write...

    Terliat proses write di bagian APE Error (area OMAP n NAND)
    Sdh dicheck tegangan VRAM (C5000) n VCoreA (C4801), brp Volt masing2.???
    Blm tentu jumperan xg boss lakukan tsb cukup tegangan'y.!!! ;)..

    Utk Log MxKey:
    Kadang2 Gw juga bingung :confused:.., sering terdetect RAP PAPUBKEY = Blank utk tipe2 tertentu baik xg normal or bermasalah . :rolleyes:..
    Mgk masih perlu dibenahi oleh Boss MX di update mendatang.!!! :peace:..

    Bisa jadi file xg boss pke corrupt.
    Xg tertinggi skrg v5.0737.3.0.1

     

Share This Page