cara buka phone lock k610i pakai cruiser,helllp meeee!

Discussion in 'Cruiser' started by buklem, Sep 11, 2008.

  1. buklem

    buklem Active Member

    Messages:
    247
    Likes Received:
    19
    Trophy Points:
    28
    gimana bos caranya,padahal hp itu udah aku flash,setelah itu tetap masih ter unlock tuh hp,maklum bos baru pengang cruiser jadi bingung mohon pencerahaaanya secara detail.
     
  2. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    attach > klik tab Unlock > Unlock
    Atau pada Toolbar Menu (Bagian Atas Windows Aplikasi Cruiser) Pilih menu Unlock > Direct Unlock
     
    Farida kamal and wayjar like this.
  3. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    Untuk Phonelock/SIMLOCK gunakan Aplikasi Cruiser Suite yaitu :

    SE A1 Java Unlocker


    Supported interfaces: DCU-60 and DCU-65.

    Standard unlocking procedure
    Turn off or disable any Sony Ericsson PC Suite or any other program which can use phone as modem device. Follow these instructions:

    Step 1
    1. Choose the phone model.
    2. Select main firmware flash file (*.a1sw, *.c*sw)
    3. Select raw FS flash file (*.a1fs, *.c*fs)
    4. Connect the phone while holding its 'C' button.
    5. After flashing and customization are done, disconnect battery and cable from the phone.
    6. Inserted test card or sim card for which is the phone locked.
    7. Power on the phone by power on/off button.
    8. Wait to customization finished.
    9. Power off phone by power on/off button.

    Step 2
    1. Please connect the phone while holding its 'C' button.
    2. After data uploading is done, disconnect battery and cable from the phone.

    Step 3
    1. Check if test card or SIM card for which is the phone locked is still inserted.
    2. Power on the phone by power on/off button.
    3. Install phone modem drivers if it is needed.
    4. In phone choose "PHONE MODE" if you can choose it.
    (Some old phones haven't this option [for example Z310])

    Step 4
    1. Disconnect battery and cable from the phone.
    2. Remove SIM card from phone.
    3. Please connect the phone while holding its 'C' button.
    4. After all has been done, disconnect battery and cable from the phone.
    5. Power on the phone by power on/off button.
    6. Go to Entertainment and select Games.
    7. Delete executor file.


    Unlocking procedure without flashing
    You don't need to turn off or disable any Sony Ericsson PC Suite or any other program which can use phone as modem device. Phone firmware has to be the same as selected firmware flash file (see Step 2.2). Check your phone software version using its service menu:
    • Power on your phone
    • Type (by pressing arrows and star symbol): >*<<*<*
    • Choose Service info.
    • Choose Software info. The first three lines of text include phone firmware version.

    • In SE A1 Java Unlocker, check "Skip full flashing" checkbox.
    • Follow these instructions:

    Step 1
    None

    Step 2
    1. Choose the phone model.
    2. Select main firmware flash file (*.a1sw, *.c*sw).
    Firmware must be the same as is in the phone!!!
    3. Please connect the phone while holding its 'C' button.
    4. After data uploading is done, disconnect battery and cable from the phone.

    Step 3
    1. Check if test card or SIM card for which is the phone locked is still inserted.
    2. Power on the phone by power on/off button.
    3. Install phone modem drivers if it is needed.
    4. In phone choose "PHONE MODE" if you can choose it.
    (Some old phones haven't this option [for example Z310])

    Step 4
    1. Disconnect battery and cable from the phone.
    2. Remove SIM card from phone.
    3. Please connect the phone while holding its 'C' button.
    4. After all has been done, disconnect battery and cable from the phone.
    5. Power on the phone by power on/off button.
    6. Go to Entertainment and select Games.
    7. Delete executor file.

    Unlocking procedure with manually run Java program
    You don't need to install modem drivers for the phone.

    • Check "Run java manually" checkbox
    • Follow these instructions:

    Step 1
    1. Choose the phone model.
    2. Select main firmware flash file (*.a1sw, *.c*sw)
    3. Select raw FS flash file (*.a1fs, *.c*fs)
    4. Connect the phone while holding its 'C' button.
    5. After flashing and customization are done, disconnect battery and cable from the phone.
    6. Inserted test card or sim card for which is the phone locked.
    7. Power on the phone by power on/off button.
    8. Wait to customization finished.
    9. Power off phone by power on/off button.

    Step 2
    1. Please connect the phone while holding its 'C' button.
    2. After data uploading is done, disconnect battery and cable from the phone.

    Step 3
    1. Power on the phone by power on/off button.
    2. Go to Entertainment and select Games.
    3. Select/Run executor file and java program will run. For a few seconds phone will turn off.
    4. Wait for about 5 seconds.

    Step 4

    1. Disconnect battery and cable from the phone.
    2. Remove SIM card from phone.
    3. Please connect the phone while holding its 'C' button.
    4. After all has been done, disconnect battery and cable from the phone.
    5. Power on the phone by power on/off button.
    6. Go to Entertainment and select Games.
    7. Delete executor file.

    FAQ

    Error: File executor has not been found or you can't find executor program in games (in manually run java program).
    Start unlocking again and follow instructions carefully, especially when you're asked to power on phone and wait for finish "Please wait" customization.

    Error: At the end of procedure: Sending loader... Error: 0xA8A269DB
    Before last attaching by 'C' remove SIM card from phone.

    Error: Flash Firmware version is not supported. Try another version.
    This version of the firmware is not supported yet. We will prepare restore files for these firmware versions soon.

    Error: Connecting via SEMC WMC Device (COM34, COM33). Error: 0xA8A269DB
    1. Do you have in phone SIM card which is accepted by phone? Can you enter menu on phone etc.?
    If you see "Insert Correct SIM Card" it means your SIM card is not accepted.
    2. Uninstall Sony Ericsson PC Suite or any other program which can use phone as modem device.

    Error: While flashing the files: 0x5593BD55
    Chosen flash files do not correspond with phone type or phone CID.
     
    wayjar, watuhireng and Aon like this.
  4. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    atau gunakan Aplikasi Cruiser Suite yg ini :
    SE A1 Fast Java Unlocker

    Supported interfaces: DCU-60 and DCU-65.

    Unlocking procedure (manual mode)

    Case 1 (appropriate rest-file is available)
    1. Choose the phone model.
    2. Connect the phone while holding its 'C' button.
    3. Wait until the program finishes and asks you to continue the following steps:

    4. Disconnect the cable from the phone.
    5. Insert either a test-card or SIM-card which the phone accepts to the phone.
    - we recommend to use test-card, if you want to use a common SIM-card, make sure that:
    - the phone accepts the SIM-card
    - you know the PIN of the SIM-card
    6. Power on the phone by pressing the power on/off button.
    7. Go to the menu 'Entertainment' -> 'Games' and select/run the application 'executor'
    8. Wait few seconds until the phone restarts by itself
    9. Then the phone is unlocked, you may delete the 'executor' application from the phone

    Case 2 (rest-file not available)
    1. Choose the phone model.
    2. Connect the phone while holding its 'C' button.
    3. Wait until the program performs operations. Then it asks you to continue the following steps:

    4. Disconnect the cable from the phone.
    5. Power on the phone by pressing the power on/off button.
    - this is required, because the rest-file is created during
    6. Find the created rest-file in your phone file folders, with the following name:
    filename should look like: R1A001_CXC1250000_GENERIC_XX.rest
    7. Download the rest-file into the following folder (see documentation):
    - you can download the rest-file by attaching the phone in mass-storage mode
    and just copying it, by attaching powered-on phone using PC-Suite application,
    via bluetooth file transfer, etc.
    - file is located in folder "Phone Memory \ Other" and "Card \ Other", if data-card is present
    The destination folder should look like:
    C:\Documents and Settings\<USER>\Application Data\Cruiser Suite\SE A1 Fast Java Unlocker
    After you copy the file, application informs: "Rest-file found"
    8. Now the rest file is available, continue with Case 1 - rest-file available procedure
     
    ninocell, wayjar and watuhireng like this.
  5. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    Qlo hasil dari prosedur diatas tidak menghasilkan Unlock yg permanen alias Phonelock/Simlock terjadi lagi, maka Jalan Terakhir harus gunakan aplikasi Cruiser Suite yg ini :

    SE Full Unlocker

    Before starting

    - Purchase some “Supreme credits“ from your reseller *).
    - Install USB Flash drivers from C:\Program Files\Cruiser Suite\SE Full Unlocker\Drivers\USB Flash

    *) To find a reseller, visit buy csca credits

    Unlocking procedure

    - Install phone modem drives corresponding to the specific phone. It can be found in Cruiser Suite install folder

    - Click the Settings tab, and fill in the connection data there:
    server data:
    - IP address/host name (currently 60.54.216.58)
    - port (currently 9001)
    your account data:
    - password

    - Click the Job tab, and start the unlock procedure:
    a) in User mode (recommended for unlocking a working phone):
    - power on the phone
    - connect the cable without holding any button
    b) in Repair mode (recommended only if GDFS security zone is damaged):
    - remove/install baterry on the phone
    - connect the phone while holding 'C' button
    - Important: when the phone restarts and powers on, it's required to reconnect the cable

    - Sometimes there might be a lack of server resources, so your operation can be scheduled to specific time
    and the application asks you to wait. If the period is too long to wait, you can close the application and
    disconnect the cable and the battery from the phone, and start the procedure again after the wait period elapses.

    - Please wait until the unlock procedure finishes.


    Installing specific phone modem (WMC) drivers in detail [Win XP]

    • Download and unpack the appropriate phone modem drivers from the support area
    (for each phone type separatelly)
    • Turn a phone on, wait until it starts
    • connect a DCU-60 cable to the phone
    • When system asks for New hardware installation, choose:
    • “No, not this time” when asking for using Windows Update
    • then choose “Install from a list or specific location (Advanced)”
    • click “Browse” and look for drivers in the path where you have extracted the drivers
    • click “Next” and then “Finish”
    • There are more components, so the system will ask more times.
    Just repeat the procedure described above
     
    wayjar and watuhireng like this.
  6. buklem

    buklem Active Member

    Messages:
    247
    Likes Received:
    19
    Trophy Points:
    28
    bos kenapa ya dengan cruiser aku nich,kalau buat ngeflash k750 ma k310i menu unlock RSA nya itu da,tapi kalau buat k320i dan k610 kok ga da,jadi aku bingung mau ngejalanin langkah 2 yang telah di sarankan ma para seniornya di atas cz menu dalam cruiser kurang untuk hp tersebut.yang jelas ini pasti aku da yang belum aku install,jadi tolong dong gmana caranya install cruiser yang bener supanya bisa ngeflash hp2 s.e..!:(step by stepnya ya bos thank,S...!
     
    wayjar likes this.
  7. xnk06

    xnk06 Well-Known Member Super Member

    Messages:
    1,138
    Likes Received:
    1,165
    Trophy Points:
    123
    Mungkin harus pakai kredit bos...
    Kalo punya sedbx dari ufs bagusnya pakai itu aja bos atau bisa coba yg free seperti setool2lite
     
  8. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0

    :noidea: ....
    Install Procedure,Flash Procedure, or Unlock Procedure ???
    Tapi Bos Buklem uda tau kan fungsi Unlock RSA itu utk apa, dan tau juga Qlo saat ini Cruiser TEAM mempunyai Paket Aplikasi yg bernama Cruiser Suite selain Cruiser v.13.20 ???
    Saya jadi bingung mo jelasin dari mana Bos .....
    :noidea:
     
    wayjar and laskarcellular like this.
  9. buklem

    buklem Active Member

    Messages:
    247
    Likes Received:
    19
    Trophy Points:
    28
    gini ja bos gimana saya bisa ngeflash tipe hp k320i,kalau pakai cruiser.mulai dari install cruiser agar bisa untuk ngeflash hp tsb,maksud aku langkah2 install cruisernya,trus langkah2 ngeflashnya,step by stepnya bos thank,s,coz aku baru punya cruiser nich
     
  10. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    Ok.. saya coba bantu dgn langkah2x dibawah ini, singkat aja yach:

    1. Jangan Hubungkan dulu Box CP id-07 ke komputer, dan Siapkan semua File ini : Cruiser V13.20 setup, Restorer File (khususnya utk K320), Suplementary File
    2. Double klik file Cruiser V13.20 setup utk memulai instalasi. ikuti petunjuk/bimbbinngan yg muncul pada komputer Anda. Pilih Full Setup
    3. Jika proses instalasi telah selesai, segera lakukan Reboot komputer
    4. Hubungkan Box CP id-07 ke komputer dan lakukan instalasi driver e-gate smartcard, dan figther cable. Semua file driver yg dibutuhkan ada di folder system Aplikasi Cruiser V13.20 yaitu di C:/Program Files/Cruiser/Cyberflex Access e-gate Drivers >>> utk e-gate smart card dan di C:/Program Files/Cruiser/Cable Drivers/Version 2154 for Win98, WinME, Win2K and WinXP (stable) >>> utk fighter cable
    5. Hubungkan UDC-10 Adapter Cable dan install driverya, ada di C:/Program Files/Cruiser/Cable Drivers/Version 2154 for Win98, WinME, Win2K and WinXP (stable) >>> utk fighter cable&UDC-10 Adapter
    6. Jika semua proses tsb diatas tlh selesai, periksa melalui Device Manager harus terdapat : e-gate USB Smart cards, e-gate virtual Reader Enumerator, SphereGSM Figther Cable (2bh dgn masing-masing COM), Smart Card Reader>e-gate USB Smart card reader, Universal Serial Bus Controllers > Fighter USB Composite Device(2bh). Semua komponen2x tersebut pada Device statusnya HARUS TERBACA : This device is working properly (tidak menunjukan tanda tanya !!!)
    7. Buka Aplikasi Cruiser V13.20. Perhatikan bagian Ujung kiri bawah aplikasi tsb harus tertera informasi : Cruiser Plus Pro --- s/n: 9031xxxx (sesuai s/n CP Box Anda)
    8. Klik menu Settings dan pada jendela yg muncul pada Tab Connections klik Autodetect. Maka Aplikasi secara otomatis akan mendeteksi CP Box dan Adapter cable yg terhunbung ke komputer sesuai COM port yg telah Anda perhatikan pada Bagian Device Manager sebelumnya
    9. lalu pilih Tab options dan aktifkan (beri tanda centang) pengaturan : Force manual ignition dan Force safe communication. Pengaturan lainnya biarkan menurut Default-nya
    10. Jangan Lupa klik OK untuk menerima pengaturan yg telah dilakukan
    11. Klik tombol Rescan, maka gambar COM port yg tadinya abu2x akan berubah menjadi kuning pada bagian com port yg sesuai
    12. Klik satu-persatu Serial Port ComX yg aktif tersebut, maka akan tampil COMx Control Windows utk proses FLASHING & SERVICING
    13. Tutup dahulu semuanya ...
    14. Siapkan atau Download salah satu bagian dari Cruiser Suite Aplication Package yg dibutuhkan utk K320 yaitu SE A1 Java Unlocker di Cruiser Suite Support Area (Anda harus telah teregistrasi sebelumnya)
    15. Sekalian Download juga Firmware yg sesuai/dibutuhkan maupun file yg dibutuhkan (termasuk Driver DCU-60 utk K320)
    16. Install aplikasi SE A1 Java Unlocker tsb (tidak ada hal yg sulit disini)
    17. Siapkan kabel DCU-60 dan hubungkan ke komputer lalu hubungkan ke Ponselnya (dalam keadaan nyala) utk instalasi driver cable & interface K320
    18. Jika semuanya telah selesai, Buka aplikasi SE A1 Java Unlocker dan Anda siap untuk melakukan Flashing maupun Unlocking
    19. Jika masih ada yg kurang jelas utk penggunaan SE A1 java unlocker, Anda dapat membaca petunjuk penggunaan Aplikasi tsb yg terdapat pada Tab Info.

    Wuih ......Selesai juga akhirnya Ngetik-ngetik disini .......Semoga Berguna&Sukses Flashing/Unlocking K320 nya yach.:thumb:
    Qlo ada yg kurang tepat pd tulisan diatas mohon diperbaiki. maklum sambil ngetik gak sempet /maleus checking tulisan :D
     
  11. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    Ada yg ketinggalan .........:eek:
    Sekalian Anda download dan instal Aplikasi SE Gdfs Backuper & Restorer
    dan backup GDFS K320nya dgn aplikasi tsb, sebelum anda melakukan flashing maupun unlocking
     
    Farida kamal likes this.
  12. buklem

    buklem Active Member

    Messages:
    247
    Likes Received:
    19
    Trophy Points:
    28
    makasih banyak bos sangat berguna bagi aku.trim,s
     
  13. wayjar

    wayjar New Member Super Member

    Messages:
    931
    Likes Received:
    2,959
    Trophy Points:
    0
    bermanfaat juga buat gw yang lagi tarap belajar..
     
  14. suwanto_hung

    suwanto_hung New Member

    Messages:
    131
    Likes Received:
    33
    Trophy Points:
    0
    kalau k320 emank ngak ada unlock rsanya
    biasa kalau konekt pake dcu-6 ada fitur unlock rsanya
    kalau buat unlock bisa cust fs j
    atau pake cruiser suite
    moga bermamfaat
     

Share This Page