Flash MYTEC Model 928 (blutooth)

Discussion in 'Infinity-Box' started by balqis02, Sep 22, 2008.

  1. balqis02

    balqis02 Well-Known Member Super Member

    Messages:
    642
    Likes Received:
    6,300
    Trophy Points:
    103
    software version: 1.06
    cable type: 1x8 (L8A)
    platform: MT62xx (autodetect)
    searching adapter at COM9...
    adapter found, version: 2000
    pins: 8, plain
    power cycles: 1
    activation cycles: 7
    power-off delay: 20
    start Rx/Tx: 1/1
    Loading configuration...
    Initializing...
    Press and HOLD phone Power button now !
    detecting pins...
    19200
    CPU: MT6226
    result: Rx:2 Tx:3
    time required: 5 sec
    Power On !

    COM9 [VCP2] selected
    Action: reset settings
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing[6226:8A02:8A01]...
    CPU: MT6226
    high speed boot disabled
    chip: 0031:17CC:F1B0
    Connecting, wait...
    Release Power button now !
    Phone detected, wait...
    Hardware: MT6226,E02
    Date: 2005.04.12
    Version: 1.0
    Version: ZL32L_THL1.6
    Version: ZX26_05C_HW
    detecting structure #2...
    done
    60 byte(s) read
    imei: 35972500012745
    connection Ok
    building list...
    done
    items to clear: 183
    130 of 183 items cleared
    0 items remains
    Finished, time used: 274 sec
    Remove/Install battery now !
     

Share This Page