Beyond B555 kasus MATOT

Discussion in 'Infinity-Box' started by gone_bdg, Nov 13, 2008.

  1. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    yg satu ... di backup EEPROM maupun FULL FLASH lancar. Pas di Write EEPROM gagal :eek:
    Ini jurnalnya:
    Beyond B555:MATOT
    Connected using UB-LOB001/Lobster 485 Cable

    Code:
    >>>Read eeprom
    COM10 [VCP0] selected
    module v1.53
    Device: Beyond-B555
    Checking data, wait...
    Action: read eeprom
    Boot...
    Press and HOLD Power button now (if boot does not start remove/install batery) !
    loading...
    next part...
    boot answer: 01
    Release Power button now
    Boot Done
    Set Baud...
    115200
    Set Baud Done
    Connecting...
    flash: 007F:22F6
    Connecting Done
    Check hardware...
    Check hardware Done
    Check parameters...
    Check parameters Done
    backup critical area...
    reading [eeprom-sta]...
    file saved: E:\jurnal service\Beyond B555_ MATOT_Infi Test 081108\Beyond-B555_eeprom-sta_20081110-155203.B1E.bin
    loading data...
    data loaded
    reading [eeprom-sec]...
    file saved: E:\jurnal service\Beyond B555_ MATOT_Infi Test 081108\Beyond-B555_eeprom-sec_20081110-155217.B1E.bin
    reading [eeprom-complete]...
    file saved: E:\jurnal service\Beyond B555_ MATOT_Infi Test 081108\Beyond-B555_eeprom-complete_20081110-155239.B1E.bin
    backup critical area Done
    Check memory...
    completed
    Finished, Remove/Install battery now !
    Time used: 61 sec
    
    >>>Read Flash
    COM10 [VCP0] selected
    module v1.53
    Device: Beyond-B555
    Checking data, wait...
    Action: read flash
    Boot...
    Press and HOLD Power button now (if boot does not start remove/install batery) !
    loading...
    next part...
    boot answer: 01
    Release Power button now
    Boot Done
    Set Baud...
    115200
    Set Baud Done
    Connecting...
    flash: 007F:22F6
    Connecting Done
    Check hardware...
    Check hardware Done
    Check parameters...
    Check parameters Done
    backup critical area...
    reading [eeprom-sta]...
    file saved: E:\jurnal service\Beyond B555_ MATOT_Infi Test 081108\FlashBack\Beyond-B555_eeprom-sta_20081110-155923.B1E.bin
    loading data...
    data loaded
    reading [eeprom-sec]...
    file saved: E:\jurnal service\Beyond B555_ MATOT_Infi Test 081108\FlashBack\Beyond-B555_eeprom-sec_20081110-155943.B1E.bin
    reading [eeprom-complete]...
    file saved: E:\jurnal service\Beyond B555_ MATOT_Infi Test 081108\FlashBack\Beyond-B555_eeprom-complete_20081110-155958.B1E.bin
    backup critical area Done
    Check memory...
    reading [flash]...
    file saved: E:\jurnal service\Beyond B555_ MATOT_Infi Test 081108\FlashBack\Beyond-B555_flash_20081110-160654.B1X.bin
    completed
    Finished, Remove/Install battery now !
    Time used: 490 sec
    
    >>>Reset to Default
    COM10 [VCP0] selected
    module v1.53
    Device: Beyond-B555
    Checking data, wait...
    Action: reset
    Boot...
    Press and HOLD Power button now (if boot does not start remove/install batery) !
    loading...
    next part...
    boot answer: 01
    Release Power button now
    Boot Done
    Set Baud...
    115200
    Set Baud Done
    Connecting...
    flash: 0000:0000
    error: unknown flash chip <<< Qo jadi Begini Ya ?!?!
    Connecting Failed
    Finished, Remove/Install battery now !
    Time used: 15 sec


    Saat Read.backup EEPROM maupun FULLFLASH, lancar Flash id terbaca, tapi saat mo write IC Flash qo jadi ga kebaca ???
    IC Flash di Rehot juga tetep begitu ....



    Yang satu lagi backup dan write EEPROM lancar, tapi saat write flash error. Alhasil ponsel tetep MATOT:( ...., ini jurnalnya :

    Code:
    20:17 12/11/2008
    Beyond B555 : MATOT
    
    COM10 [VCP0] selected
    module  v1.54
    Device: Beyond-B555
    Checking data, wait...
    Action: read flash
    Boot ...
    Press and HOLD Power button now !
    loading...
    next part...
    boot answer: 01
    Release Power button now
    Boot Done
    Set baud ...
    115200
    Set baud Done
    Connecting ...
    flash: 00BF:7353
    Connecting Done
    Check hardware ...
    sw version: ULC2GL                       0    A      0 q
    Check hardware Done
    Check parameters ...
    Check parameters Done
    backup critical area ...
    reading eeprom-sta...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Full Flash Back\Beyond-B555_eeprom-sta_20081112-201016.B1E.bin
    loading data...
    data loaded
    reading eeprom-sec...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Full Flash Back\Beyond-B555_eeprom-sec_20081112-201050.B1E.bin
    reading eeprom-complete...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Full Flash Back\Beyond-B555_eeprom-complete_20081112-201105.B1E.bin
    backup critical area Done
    Check memory ...
    reading flash...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Full Flash Back\Beyond-B555_flash_20081112-201805.B1X.bin
    completed
    Finished, time used: 514 sec
    Remove/Install battery now !
    
    Write EEPROM >>>
    COM10 [VCP0] selected
    module  v1.54
    Device: Beyond-B555
    Checking data, wait...
    Action: flash write
    Boot ...
    Press and HOLD Power button now !
    loading...
    next part...
    boot answer: 01
    Release Power button now
    Boot Done
    Set baud ...
    115200
    Set baud Done
    Connecting ...
    flash: 00BF:7353
    Connecting Done
    Check hardware ...
    sw version: ULC2GL                       0    A      0 q
    Check hardware Done
    Check parameters ...
    Check parameters Done
    backup critical area ...
    reading eeprom-sta...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Beyond-B555_eeprom-sta_20081112-201926.B1E.bin
    loading data...
    data loaded
    reading eeprom-sec...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Beyond-B555_eeprom-sec_20081112-201940.B1E.bin
    reading eeprom-complete...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Beyond-B555_eeprom-complete_20081112-201957.B1E.bin
    backup critical area Done
    Check memory ...
    unlocking...
    error: unknown firmware, read flash and send to support !
    error: operation failed
    Check memory Done
    write ...
    reset...
    Done
    Erasing: Eeprom
    Writing: Eeprom
    write Done
    Finished, time used: 61 sec
    Remove/Install battery now !
    >>>Masih MATOT
    
    COM10 [VCP0] selected
    module  v1.54
    Device: Beyond-B555
    Checking data, wait...
    Action: flash write
    Boot ...
    Press and HOLD Power button now !
    loading...
    next part...
    boot answer: 01
    Release Power button now
    Boot Done
    Set baud ...
    115200
    Set baud Done
    Connecting ...
    flash: 00BF:7353
    Connecting Done
    Check hardware ...
    sw version: ULC2GL                       0    A      0 q
    Check hardware Done
    Check parameters ...
    Check parameters Done
    backup critical area ...
    reading eeprom-sta...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Beyond-B555_eeprom-sta_20081112-202124.B1E.bin
    loading data...
    data loaded
    reading eeprom-sec...
    file saved: E:\jurnal service\Beyond-B555_eeprom-sec_20081112-202153.B1E.bin
    reading eeprom-complete...
    file saved: E:\jurnal service\Beyond-B555_MATOT_121108\Beyond-B555_eeprom-sec_20081112-202153.B1E.bin
    backup critical area Done
    Check memory ...
    unlocking...
    current status: 0
    operation done
    Check memory Done
    write ...
    reset...
    Done
    Erasing: Firmware
    error: erase failed: 00400000 <<<<< ERORR !!!
    write Failed
    Finished, time used: 86 sec
    Remove/Install battery now !
    
    Turunkan kecepatan >>>
    COM10 [VCP0] selected
    module  v1.54
    Device: Beyond-B555
    Checking data, wait...
    Action: flash write
    Boot ...
    Press and HOLD Power button now !
    loading...
    next part...
    boot answer: 01
    Release Power button now
    Boot Done
    Set baud ...
    slowest
    Set baud Done
    Connecting ...
    flash: 00BF:7353
    Connecting Done
    Check hardware ...
    Check hardware Done
    Check parameters ...
    Check parameters Done
    backup critical area ...
    reading eeprom-sta...
    file saved: D:\Program Files\InfinityBox\Pana01\Beyond-B555_eeprom-sta_20081112-202457.B1E.bin
    loading data...
    data loaded
    reading eeprom-sec...
    file saved: D:\Program Files\InfinityBox\Pana01\Beyond-B555_eeprom-sec_20081112-202501.B1E.bin
    reading eeprom-complete...
    file saved: D:\Program Files\InfinityBox\Pana01\Beyond-B555_eeprom-complete_20081112-202508.B1E.bin
    backup critical area Done
    Check memory ...
    unlocking...
    current status: #2, already unlocked
    already done (mode-0), operation aborted
    error: operation failed
    Check memory Done
    write ...
    reset...
    Done
    Erasing: Firmware
    error: erase failed: 00400000 <<< MASIH ERORR !!!
    write Failed
    Finished, time used: 53 sec
    Remove/Install battery now !
    Ada yg punya skemanya ?
     
  2. komix

    komix New Member

    Messages:
    224
    Likes Received:
    32
    Trophy Points:
    0
    ya biasanya ic flashnya lemah itu bos musti diganti ! kalau dah mau diflash flashing aja dulu paki file beyon b500 yang ada di suport areanya infinity baru flashing lagi ma file b555 dan eprom bakapanya tadi !!!!!



    tested for me :loveeye::tea:
     
    gone_bdg likes this.
  3. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    uda dicoba pke file B500 gak mau jalan proses flashingnya.
    Lah ... yg jual IC Flash B555 ada gitu ???
    Qlo kanibalan .... musti nunggu seabad donk, masih jarang dapet ponselnya juga :D
     
  4. twentyonecell

    twentyonecell Well-Known Member

    Messages:
    315
    Likes Received:
    1,194
    Trophy Points:
    103

    infinity krng sempurna support beyond b555...pake cpf box di jamin oke:thumb::thumb::thumb:
     
  5. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    Lha ... Qlo memang masalah di hardware (IC Flash ato tegangan kerjanya) di flash pke apapun juga ttep masalah kan ?
     
  6. laskarcellular

    laskarcellular New Member

    Messages:
    192
    Likes Received:
    824
    Trophy Points:
    0
    betul bos......
    kalo udah kena hardware nya, flash pake box sehebat apapun ya mesti tetep error:D

    infinity udah bisa kok repair beyond b555, cuma gak full flash
    mentok2 nya cuma rebuild ic flash nya aja.... selebih nya gak tau lagi
     
    gone_bdg likes this.
  7. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    setelah mempelajari B555 dari informasi sejagad maya, mengenai problem saya diatas.
    Kesimpulannya :
    Memang IC Flash nya rentan masalah
    Khusus IC Flash STT, akan mengalami "erase failed: 00400000" .pada umumnya seperti itu ... katanya yg sering Flashing B555 :)
    Jika mendapatkan B555 dgn IC Flash STT, lebih baik Cancel aja. Atau ganti dulu IC Flashnya :D

    Jika sudah ada yg punya Schematicnya .... upload di forum ini yaa.... In New Thread aja dech
    Terima kasih kepada semuanya yg sudah respon disini :thumb:
    Ok Case Closed :closed:
     
  8. laskarcellular

    laskarcellular New Member

    Messages:
    192
    Likes Received:
    824
    Trophy Points:
    0

    mantap gan....sependapat kita
     
  9. twentyonecell

    twentyonecell Well-Known Member

    Messages:
    315
    Likes Received:
    1,194
    Trophy Points:
    103

    setelah ganti ic flash kemudian di flash apakah hp nya jadi insertsim atau gak:D:D:D

    gak cuman merk STT yg lain jg sama error 00400000;););)
     

Share This Page