9500 Blank..

Discussion in 'WD2 & APE' started by energiecell, Dec 15, 2008.

Thread Status:
Not open for further replies.
  1. energiecell

    energiecell Member

    Messages:
    52
    Likes Received:
    12
    Trophy Points:
    18
    TOLOOOOONNGG...:frusty:
    Nokia 9500 LCD Blank depan dan dalam..:eek:

    Sudah di check dekat IC Flash bener semua, check jalur, tetap sama aja..:noidea:

    Telp keluar masuk bisa..

    Please HELP... A.S.A.P


    Thanks for JAWIRER...:thumb:

    :blah: Sekalian deh, ada yang punya board 6280 gak?
    Barter ama yang matot yuk, tentu gue tambahin deh...:peace:
     
  2. adryfia

    adryfia New Member

    Messages:
    249
    Likes Received:
    118
    Trophy Points:
    0
    Wah masalahnya hampir sama yak gue nih, gue dpt servicean 9500 blink putih doank and lok dinyalakan LCD laurnya malah LCD dalemnya mati. Cb flash pke jaf gak bs di self test gak bs. Padahal akar masalahnya gara2 kehabisan batre doank. Tlg ya pren sekalian and para master untuk selesaikan masalah gue ni. :thumb:
     
  3. dj.orion

    dj.orion Super Moderators Super Moderator

    Messages:
    3,109
    Likes Received:
    5,147
    Trophy Points:
    123
    Sudah diganti flexible'y.??? :)..
     
  4. BILITONIT

    BILITONIT New Member

    Messages:
    258
    Likes Received:
    47
    Trophy Points:
    0

    sedikit keluar topik:peace::D
    Boleh taho Bos Orion, cara flash yang benar + triknya untuk N 9500 (RA-2 type).
    karena ane juga lagi dapet kasus yg sama, tp blum sempat gnti flexibleya.
    maklum newbieeeeeeeeeeee:tea::thumb:

    BR,
    BILITONIT
     
  5. dj.orion

    dj.orion Super Moderators Super Moderator

    Messages:
    3,109
    Likes Received:
    5,147
    Trophy Points:
    123
    Utk full flash, gunakan box xg support flashing MCU n APE (UFS_HWK gx bisa)

    Gunakan system pengisian MCU, APEvent, APEusrd dan ADSP file scr automatic dg pilihan product code.
    Gunakan koneksi 2 cable sxgus, FBUS n USB.
    Utk pertama x penggunaan USB, ntar pd pertengahan proses akan dimintai driver ADSP.
    Install driver tsb dg mengarahkan driver searching ke directory folder dimana driver tsb berada.
    Contoh dg Mtbox di c>Program Files>GriffinTeam>MT-Box>Drivers
    Dg Box lain juga sama, hny beda directory driver'y ;)..
    Ssdh terinstall, proses flashing kan berjalan sampai finish.. klo murni kasus software :D..

     
    BILITONIT likes this.
  6. dj_bedhol

    dj_bedhol Moderator Moderator

    Messages:
    374
    Likes Received:
    339
    Trophy Points:
    73
    Coba LOG nya om,kl bisa yg komplit mulai dr pengecekan sampai proses flashing.

    Dan Sepertinya UFS sudah bisa Flash 9500(MCU+ADSP+APE):D

    Sedikit analisa

    Coba Check Dengan MTbox,pasang kabel F-BUS+DKU2.kalo di toolbars nya ada warning"USB not recognized"biasanya masalah dr flexyble nya walau tidak menutup kemungkinan yg lain(SW/HW)
     
    BILITONIT likes this.
  7. Heru Service

    Heru Service New Member

    Messages:
    73
    Likes Received:
    66
    Trophy Points:
    0
    flash dengan ufs caranya bagaimana, om? apa pakai hwk ori?
     
  8. BILITONIT

    BILITONIT New Member

    Messages:
    258
    Likes Received:
    47
    Trophy Points:
    0

    Ane pakai jaf+PKey,
    untuk jenis Hp yg pkai sistem APE Variant ini (komunikator), untuk proses flashing pakai firmware versi yg sama atau yg diatasnya (upgrade)?
    Saya coba dulu yach Bos.
    Trims yach Bos :D:tea::thumb:
     
    Last edited by a moderator: Dec 19, 2008
  9. charleshdi

    charleshdi New Member

    Messages:
    24
    Likes Received:
    1
    Trophy Points:
    0
    coba ganti papan keyboardnya
     
  10. Abel

    Abel New Member

    Messages:
    119
    Likes Received:
    46
    Trophy Points:
    0
    friend. hp kamu itu bisa telp. gak perlu diflash :focus: cek dan coba ganti flesibel atau papan keyboard
    atau ic lcd
     
  11. adryfia

    adryfia New Member

    Messages:
    249
    Likes Received:
    118
    Trophy Points:
    0
    Sy punya gak bisa ngapa2in pren cuma melotot layar putih doang. Kayaknya kabel DKU2 nya yang gak mo konek makanya proses flasing selalu error, kira2 masalahnya dmana ya pren???
     
  12. BILITONIT

    BILITONIT New Member

    Messages:
    258
    Likes Received:
    47
    Trophy Points:
    0


    Spesial untuk Bos Orion di tempat:D:
    Smoga bos tidak bosen hi..................2000X:thumb:
    masih sedikit penjelasan dari pengertian ...............Utk pertama x penggunaan USB, ntar pd pertengahan proses akan dimintai driver ADSP.
    Install driver tsb dg mengarahkan driver searching ke directory folder dimana driver tsb berada.
    Contoh dg Mtbox di c>Program Files>GriffinTeam>MT-Box>Drivers
    Dg Box lain juga sama, hny beda directory driver'y ;).....................

    Setahu saya (dr website y Odeon) =====ambil contoh sy pakai JAF+PKey===== bukannya sebelum melakukan flashing kita sudah harus menginstalnya terlebih dahuludriver ADSP tsb secara terkoneksi langsung dari websitenya odeon tsb.
    Intinya:
    1. Mana langkah yg harus sy tempuh?
    2. Apakah driver ADSP tsb untuk otomatis semua jenis Nokia Komunikator (9500,9300, etc)?
    Masalahnya sy dah cb flash sebelumnya dan setelah proses flashing itu hp 9500 , lognya si APEvent, APEusrd dan ADSP file tidak terdeteksi alias ???????? (tanda tanya).
    Maklum macih learning and its my first case for Comunicator, trims sebelumnya:peace:

    BR.
    BILITONIT
     
  13. dj.orion

    dj.orion Super Moderators Super Moderator

    Messages:
    3,109
    Likes Received:
    5,147
    Trophy Points:
    123
    Flash ADSP blm dicoba dg JAF :p.. kebiasaan pke Mtbox :D..
    Spt'y gx ada beda'y proses instalasi driver ADSP Mtbox n Mxkey.

    Waktu setup Tool Installer, automatis semua driver diextrac ke directory driver masing2 program
    Mtbox:
    c>Program Files>GriffinTeam>MT-Box>Driver
    JAF: c>Program Files>ODEON>JAF>JAF USB Driver
    Driver ADSP xg didlm folder ini blm terset ke system32 di OS Windows
    1 file driver, isi'y beragam tipe (dlm security catalog)

    Maka'y Gw bilang, utk pertama kali flash'n ADSP tipe tertentu.
    Misal'y 9500 akan diminta driver ADSP pd proses flash'n.
    Disaat itu, ADSP (USB COM) ut ktipe 9500 sdh terinstall di system32.
    Utk flash'n 9500 selanjut'y gx install lagi, sdh auto muncul.

    Bgtu juga dg tipe lain, misalkan Ngage-C.
    Kan diminta juga driver ADSP utk pengenalan USB COM Ngage-C.
    Selanjut'y ---> auto ;)..

    Lanjut ke persoalan @enegiecell n @ardyfia
    Bgm perkembangan'y.???
    Klo error pd proses flash'n, bisa dipost Log'y, biar teman2 di djawir bisa bantu analisa :cell:..

     
  14. adryfia

    adryfia New Member

    Messages:
    249
    Likes Received:
    118
    Trophy Points:
    0
    Proses flash msih error bang padahal APE driver udah terinstal waktu upgrade 9300, kalo hardware kira2 masalahnya dimana bang???, cz tak flash MCU pake UFS bisa kok makanya jadi heran :frusty::(
    ni lognya pren :
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2_6270.6440
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2n6270.c01
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2n6270.l20
    APE User Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2n6270.u20
    Languages in ppm: English,Bahasa Ind/Mal,Philipino,Hindi
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    C:\Program Files\ODEON\JAF\ProgData\354306001454720_imei_back up_12281912.rpl
    Done!
    Backup imei OK!
    MCU: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2_6270.6440
    Booting phone...
    MCU ID: 0x2142
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A0
    Boot is ready...
    FLASH ID0: 2A7E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E2A0100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\m_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x8130; Loader chk: 27
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84EC5A3CDA9B0813D42BD3315F
    MSID decoded: 3E4EBAE900927023A8000000
    FAID: 494A826ACC927A98027AC9CC
    Operation took 0 minutes 17 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 01000000 - 0100FFFF...
    Error erasing area: 01000000 - 0101FFFF
     
  15. BILITONIT

    BILITONIT New Member

    Messages:
    258
    Likes Received:
    47
    Trophy Points:
    0


    Bos Orion + Dj_bedhol iki loh lognya::D
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RA-2\
    Scanning for ini files...
    INI file .ini is missing. Continue searching for second ini type...
    Changing flashing settings...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2_5221.4900
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2n5221.c01
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2n5221.l20
    APE User Flash file: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2n5221.u20
    Languages in ppm: English,Bahasa Ind/Mal,Philipino,Hindi

    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    C:\Program Files\ODEON\JAF\ProgData\354306001882284_imei_backup_9242512.rpl
    Done!
    Backup imei OK!
    MCU: C:\Program Files\Nokia\Phoenix\Products\RA-2\RA2_5221.4900
    Booting phone...
    MCU ID: 0x2142
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A0
    Boot is ready...
    FLASH ID0: 2A7E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E2A0100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\m_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x8130; Loader chk: 27
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 843D4B8FA56D9A96F91052DF36
    MSID decoded: 3E4EBAE9004B01BAAA000000
    FAID: 6217A804F4581CB2162BA44B
    Operation took 0 minutes 10 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 01000000 - 0100FFFF...
    Erasing area: 01010000 - 0139FFFF...
    Erasing area: 013A0000 - 013EFFFF...
    Erasing area: 017A0000 - 017EFFFF...
    Operation took 0 minutes 28 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 0 minutes 18 seconds...
    Restarting MCU...
    Flashing Done!
    Operation took 1 minutes 0 seconds...

    After flash processing...
    Waiting for phone to boot...
    Reading...
    Phone type: RA-2, Software version: 4.49.00
    IMEI: 354306001882284
    Product Code: 0532269
    Resetting PPC...
    Done!
    Setting test mode...
    Setting FULL FACTORY...
    Operation took 0 minutes 5 seconds...
    Done!
    Powering the phone...
    Unlocking...
    IMEI: 354306001882284
    ASIC: 2
    SW version: 4.49.00
    Checking locks...

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Done!
    DCT4 unlock counter: 4

    dah sy coba konekin DKU 2 nya saat plashing tp nongkol trus "USB Not Recognizeeee" dan "P166??? USb driver" sy lupa detilnya:crazy::frusty::frusty:.
    Mohon pencerahaanya.
    Trims selalu disupport. HIDHUP DJAWIR:clap::clap:

    BR,
    BILITONIT
     
  16. BILITONIT

    BILITONIT New Member

    Messages:
    258
    Likes Received:
    47
    Trophy Points:
    0


    Spesial untuk para senior dan kawan - kawan seperjuangan semuanya, please problem saya direspon.
    Hpnya masih ada di saya lagi.

    BR,
    BILITONIT:tea:
     
  17. acire

    acire New Member

    Messages:
    32
    Likes Received:
    3
    Trophy Points:
    0
    bos gak ada pengaruh ma software
    coba ganti flexibel nya bos
    kalo gak ic lampu n ic power lcd nya bos
     
    BILITONIT likes this.
  18. BILITONIT

    BILITONIT New Member

    Messages:
    258
    Likes Received:
    47
    Trophy Points:
    0


    thank for supportnya bro acire alias ngaciiiiiiiiiiiiiiiiiiiiiir terus, he..............1000x:D:tea:
    BR,
    BILITONIT
     
  19. BILITONIT

    BILITONIT New Member

    Messages:
    258
    Likes Received:
    47
    Trophy Points:
    0


    Bos Acire dan kawan kawan yang lain thanks sy telah berhasil.
    setelah diganti tuch flexiblenya mak nyosssssssssssssss lagi dah.:tea:


    BR,
    BILITONIT
     
Thread Status:
Not open for further replies.

Share This Page