6020 Blink

Discussion in 'DCT-4' started by wayjar, Jan 11, 2009.

  1. wayjar

    wayjar New Member Super Member

    Messages:
    931
    Likes Received:
    2,959
    Trophy Points:
    0
    Para Master Yth. Toolong...! Nokia 6020 saya flash dg JAF berhasil, tp Blink atau tidak bisa normal mode, kalo dengan UFS gak bisa pada UI Setting. saya dah coba beberapa Firmware tp tetap seperti itu.. yang terakhir saya flash dengan Firmware RM30-05.22. Gmana Solusinya !!!
     
  2. adidaxus

    adidaxus New Member

    Messages:
    70
    Likes Received:
    90
    Trophy Points:
    0
    coba erase dulu bos,sebelumnya backup dulu pm ama rplnya
    terus full flas
    saya biasanya pakai 5.20 lancar2 aja bos
     
  3. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    Di JAF ga mau Normal Mode
    Di UFS ga mau Local mode
    Lebih baik posting dulu log Flashingnya kesini ..... biar lebih jelas masalahnya dan ga simpang-siur saran yg diberikan oleh rekan2x

    BTW kasus awalnya apaan Uy ?
     
  4. adryfia

    adryfia New Member

    Messages:
    249
    Likes Received:
    118
    Trophy Points:
    0
    Setuju ma bang Gone, post log nya dl pren and kasus awalnya kenapa?? :welcome::tea:
     
  5. wayjar

    wayjar New Member Super Member

    Messages:
    931
    Likes Received:
    2,959
    Trophy Points:
    0
    Kasus Awalnya kena Air, tp dah saya check tp keliatannya gk masalah dengan komponen2.
    Bentar lagi saya kirim log nya.
     
  6. wayjar

    wayjar New Member Super Member

    Messages:
    931
    Likes Received:
    2,959
    Trophy Points:
    0
    INI LOG dengan UFS:

    Detected: V 05.22 23-05-07 RM-30 (c) Nokia.
    1st Boot: Ok, DCT4, UPP: 2142 [Rm-30] [2.0.8.0]
    2nd Boot: u_2nd.fia, Ver: 4.76.0
    Fl0: 0x01000000-0x01FFFFFF,00012C7E,Amd 29NS128N
    Algorithm: u_amd.fia, Ver: 4.76.0
    Algorithm Ok, MSID: 84E15FBD09AF67065D4B39B1B9
    Decoded MSID: 28C7BAE9-00018771-AA000000
    Encoded FAID: CF34CB95-18C564F9-EFEF75D4
    IMAGE: rm30__05.220
    Area1: 0x01000000-0x0101FFFF Erased, Time: 00:01
    Area2: 0x01020000-0x0185FFFF Erased, Time: 01:01
    Area3: 0x01E60000-0x01FDFFFF Erased, Time: 00:12
    MCU Flashing Completed, Time: 02:09
    Chip SECTOR_SIZE: 128k, File FAT_SECTOR_SIZE: 64k
    Warning, Must be Used 128Kb Sector_Size CNT File
    128K Image Saved as: rm30__05.22.image_x_128
    IMAGE: rm30__05.22.image_x
    Area1: 0x01A60000-0x01E5FFFF Erased, Time: 00:30
    CNT Flashing Completed, Time: 00:25
    Running: Nokia File Server
    CNT Extract Warning, Res: 0, CNT Area not Empty
    Contents Package Extracting Ok, Time: 00:10
    1st Boot: Ok, DCT4, UPP: 2142 [Rm-30] [2.0.8.0]
    2nd Boot: u_2nd.fia, Ver: 4.76.0
    Fl0: 0x01000000-0x01FFFFFF,00012C7E,Amd 29NS128N
    Algorithm: u_amd.fia, Ver: 4.76.0
    Algorithm Ok, MSID: 84C091453DD287B39E75C88D69
    Decoded MSID: 3E4EBAE9-00018771-AA000000
    Encoded FAID: 1D6809BC-014DD66E-E82DF47F
    IMAGE: rm30__05.22x
    Area1: 0x01860000-0x01A5FFFF Erased, Time: 00:14
    PPM Flashing Completed, Time: 00:24
    Flashing Completed, Rebooting Mobile
    IMEI: 357937-00-519513-8, ASIC: 2
    SimLocks Initialized (NM Ok), Time: 00:00
    Set UI Defaults ...
    UI Defaults Failed
     
  7. wayjar

    wayjar New Member Super Member

    Messages:
    931
    Likes Received:
    2,959
    Trophy Points:
    0
    Log dengan JAF:

    Getting MCU ID

    MCU ID: 0x2142
    FLASH ID0: 2C7E0001 <=> SPANSION -> 72NS128N Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 05.22
    23-05-07
    RM-30
    (c) Nokia.
    HW version: 5051
    PCI version:
    UEM version: 400
    UPP version: 8514
    RFIC version: 0205
    DSP version: P05w06.v40
    LCD version: AMAZON
    PPM version: V 05.22
    23-05-07
    RM-30
    (c) Nokia.
    X
    Production serial number: NE0012643
    Product code: 0523035
    Module code: 0202357
    Basic production code: 0514188
    Flash code:
    Order number:
    Product specific data:
    Long production SN:
    ATO: N?????????????????????????????????????????????????
    Default SN type: N?????????????????????????????????????????????????
    IMEI plain: 357937005195138
    IMEI spare to net: 3A 75 39 07 50 91 15 03
    IMEI SV to net: 33 75 39 07 50 91 15 13 F6
    Master Code: 5151643421
    Phone type: RM-30, Software version: 05.22, Language Pack: X
    User code: 12345

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Searching for saved ini...
    Checking for file C:\Program Files\ODEON\JAF\JAF_RM-30.ini
    Saved INI not found, loading INI list...
    Setting local mode...
    Reading product code...
    Product Code: 0523035
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-30\
    Scanning for ini files...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.220
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22k
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22.image_ctv_ru
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Languages in ppm: English,German,Russian,Bulgarian,Ukrainian,Romanian
    Done!
    Changing flashing settings...
    Setting local mode...
    Reading...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.220
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22x
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22.image_x
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    C:\Program Files\ODEON\JAF\ProgData\357937005195138_imei_backup_2036121.rpl
    Done!
    Backup imei OK!
    MCU: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.220
    Booting phone...
    MCU ID: 0x2142
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A0
    Boot is ready...
    FLASH ID0: 2C7E0001 <=> SPANSION -> 72NS128N Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E2C0100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7518; Loader chk: 10
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84E15FBD09AF67065D4B39B1B9
    MSID decoded: 28C7BAE900018771AA000000
    FAID: CF34CB9518C564F9EFEF75D4
    Operation took 0 minutes 10 seconds...
    Erasing...
    Found 3 interval(s) to erase
    Erasing area: 01000000 - 0101FFFF...
    Erasing area: 01020000 - 0185FFFF...
    Erasing area: 01E60000 - 01FDFFFF...
    Operation took 1 minutes 7 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 2 minutes 7 seconds...
    Restarting MCU...
    CNT: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22.image_x
    Booting phone...
    MCU ID: 0x2142
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A0
    Boot is ready...
    FLASH ID0: 2C7E0001 <=> SPANSION -> 72NS128N Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E2C0100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7518; Loader chk: 10
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 842C922EC61736E1240F770762
    MSID decoded: 1C15BAE300018771AD0005BD
    FAID: 693A3B988FB7EB092547BFCF
    Operation took 0 minutes 10 seconds...
    Erasing Content Pack...
    Found 1 interval(s) to erase
    Erasing area: 01A60000 - 01E5FFFF...
    Operation took 0 minutes 26 seconds...
    Writing...
    Writing converted flash to 128k page
    Perm. Data Restore OK
    Operation took 0 minutes 26 seconds...
    Restarting MCU...
    Operation took 0 minutes 0 seconds...
    Extracting Content Pack...
    Running: (c) Nokia File Server
    CNT Extract Skiped.
    Operation took 0 minutes 14 seconds...
    PPM: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.22x
    Booting phone...
    MCU ID: 0x2142
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A0
    Boot is ready...
    FLASH ID0: 2C7E0001 <=> SPANSION -> 72NS128N Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E2C0100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7518; Loader chk: f0
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84C091453DD287B39E75C88D69
    MSID decoded: 3E4EBAE900018771AA000000
    FAID: 1D6809BC014DD66EE82DF47F
    Operation took 0 minutes 10 seconds...
    Erasing PPM...
    Found 1 interval(s) to erase
    Erasing area: 01860000 - 01A5FFFF...
    Operation took 0 minutes 12 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 0 minutes 25 seconds...
    Restarting MCU...
    Flashing Done!
    Operation took 5 minutes 41 seconds...

    After flash processing...
    Waiting for phone to boot...
    Reading...
    Phone type: RM-30, Software version: 05.22
    IMEI: 357937005195138
    Product Code: 0523035
    Resetting PPC...
    Done!
    Changing mode...
    Failed!!!
     
  8. rudifast

    rudifast TALK LESS DO MORE Product Supporter

    Messages:
    1,484
    Likes Received:
    6,025
    Trophy Points:
    0
    Erase total,flashing ulang langsung init simlock>>>hasilnya gimana?
    kalo tidak blink berarti file pm bermasalah.
    read pm dari ponsel lain yg normal,lalu write kan ke ponsel tsb,init simlocks dan Full factory default.

    semoga membantu.
     
  9. gone_bdg

    gone_bdg Super Moderators Super Moderator

    Messages:
    1,859
    Likes Received:
    3,439
    Trophy Points:
    0
    Ok, "Water Damage" harus yakin dulu sudah bersih mesinnya

    Coba Buka LCD lalu UI Setting ato ReFlash, Jika Local Mode Normal (di INFO Bisa) coba masuk Normal Mode

    Jika hasil Repairing Software Tanpa LCD bisa Local & Normal Mode dengan baik, kemungkinan LCD (check juga connectornya) ato CPU Damage

    NB :
    N6020 LCDnya langsung terhubung ke CPU, bila rangkaian internal LCD terganggu (komponen2x yg nempel pd flexi LCD), maka dapat menimbulkan masalah yg Anda alami.
     
  10. adryfia

    adryfia New Member

    Messages:
    249
    Likes Received:
    118
    Trophy Points:
    0
    PCB nya dicuci dl pren pke thiner termasuk conek2nya, setelah itu baru direflash lg pren. Dipost hasilnya pren
     
  11. qpoetcell

    qpoetcell Active Member

    Messages:
    167
    Likes Received:
    19
    Trophy Points:
    28
    setuju boz....dicuci dlu pcbx sampai kincrong.....
    aq pnh dpt kasus yg sama, pas di soft langsung tembus:thumb:
    klo msih bmslh coba rehot ic flas n ic CPu
     

Share This Page