6020 diflash ga mau write..

Discussion in 'DCT-4' started by over you, Feb 1, 2009.

  1. over you

    over you Active Member

    Messages:
    142
    Likes Received:
    41
    Trophy Points:
    38
    bos saya ada kasus neh,
    6020 boot OK,tapi pas mau write flash gagal.udah ganti IC flash tetap aja.
    ini lognya pake JAF

    Getting MCU ID

    MCU ID: 0x2142
    FLASH ID0: 00010000 <=> Flash -> not used Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 0
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: 00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Failed! Aborting!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-30\
    Scanning for ini files...
    INI file .ini is missing. Continue searching for second ini type...
    Changing flashing settings...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.200
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.20a
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.20.image_a
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Changing flashing settings...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.200
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.20x
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.20.image_x
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Failed! Aborting!
    Failed to backup imei...
    MCU: C:\Program Files\Nokia\Phoenix\Products\RM-30\rm30__05.200
    Booting phone...
    MCU ID: 0x2142
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A0
    Boot is ready...
    FLASH ID0: 00010000 <=> Flash -> not used Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 0
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: 00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07
    Flash ID is 0x01000000
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7518; Loader chk: 26
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84208A52B9C90AA4AC326A6FEB
    MSID decoded: 6357BAE9001C0B1AA9000000
    FAID: 34D9EDC71B1694CD7925D0CD
    Operation took 0 minutes 10 seconds...
    Erasing...
    Found 3 interval(s) to erase
    Erasing area: 01000000 - 0101FFFF...
    Erasing area: 01020000 - 0185FFFF...
    Erasing area: 01E60000 - 01FDFFFF...
    Operation took 0 minutes 1 seconds...
    Writing...
    Error cmd: 14!
    Addr: 01000000


    Mohon bantuannya bos...
     
  2. noplek

    noplek Well-Known Member

    Messages:
    483
    Likes Received:
    1,524
    Trophy Points:
    103
    IC Flash_nya mungkin yg belum bagus... coba ganti Ic flash yg lain...
     
  3. marlianto

    marlianto New Member

    Messages:
    143
    Likes Received:
    42
    Trophy Points:
    0
    coba reball cpunya bos kalau perlu ganti aja...:thumb:
    semoga membantu...;););)
     
  4. wayjar

    wayjar New Member Super Member

    Messages:
    931
    Likes Received:
    2,959
    Trophy Points:
    0
    coba full erase dulu dan ganti firmwarenya dengan versi lain..
    SEMOGA MEMBANTU
     
  5. usil_gaul

    usil_gaul Active Member

    Messages:
    182
    Likes Received:
    92
    Trophy Points:
    38
    cpunya yg bermasalah bos....coba rehot atau reball dulu.....
     
  6. jims

    jims Super Moderators Super Moderator

    Messages:
    748
    Likes Received:
    1,136
    Trophy Points:
    103
    Ic flash nya kan ngak kedetek bos?? tuh 0,jadi ganti dulu ic flash nya lagi sampai
    FLASH ID0: 00010000 <=> spansion/AMD(merk ic) -> not used Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
    FLASH ID1: 00010000 <=> spansion/AMD(merk ic) -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10

    baru berarti ndetek,baru flash ulang ;)
     
  7. resby

    resby Active Member

    Messages:
    162
    Likes Received:
    16
    Trophy Points:
    28
    bener kata bos jims ic flashnya,kebetulan aku jg pernah gtu tp aku cuma direhot aj,lngsung ok!:D:D:D
     
  8. over you

    over you Active Member

    Messages:
    142
    Likes Received:
    41
    Trophy Points:
    38
    Sorry nih baru nongol lg,komp hbs trouble sih.
    Apa iya bos ic flashnya,soalnya hasil flash sblm dan sesudah ganti ic flash tuh sama lognya..
    Menurut saya ada jalur yg ga konek ke ic flash,ta coba reball CPU & UEM dulu bos..
     
  9. ferizona

    ferizona New Member Super Member

    Messages:
    578
    Likes Received:
    682
    Trophy Points:
    0
    wah boss, jgn ngacak2 hardware lain dulu, klo ga bsa di write itu dr ic flas nya, mgkn pemasangan nya kurang bagus, nanti mlh error kemana2 :cry:
     

Share This Page