Nokia SL3 based - Facts & Fiction. Discussion

Discussion in 'BB5' started by tomlatu, May 14, 2009.

  1. tomlatu

    tomlatu Well-Known Member

    Messages:
    305
    Likes Received:
    141
    Trophy Points:
    53
    Hi my dear

    For some time we noticed the new BB5 phones with software version higher than 50.00.

    But I would like start from the beginning, when Nokia Company introduced on the market BB5 phones with new security system SIMLOCK was impossible to unlock. For long time we waited to update our software to be able to fully service these phones - SIM-Lock too.
    At this time almost any type of lock on BB5 type with SL2 is possible to unlock. Right now Nokia have completely changed the firmware in the handsets with
    SL3 Security Zone.
    At the moment any attempt to downgrade or unlock the handset ends from damage security zone. The most common symptoms are:

    * Contact Service
    * damaged IMEI - 12345678901?
    * white blinking
    * NOKIA logo freeze
    * Security 'Failed to Read'
    * dead handset


    Called by Nokia, new idea - Protected Application PA_SL3 (SimLockx; x=2 , x+3) that protects the functions which are executed by special applications. Security zone formatted by 'ProtectedApp_SL' application isn't compatible with PA_SL2 application and vice versa yet - totally modyfied EEprom in flash.

    All currently manufactured phones have the SL3 structure and I am sure that it will be more in the future. In addition, Nokia complete rebuilding system of RPL counting by the RPL server.

    What mobiles are SL3 right now ?

    based on different CPU types, but new MCU Software security SimLock3 - 'SL3' (T-Mobile & Orange)

    * 3600s MCU v56.26 (RM-352)
    * 5310 MCU v58.58, v59.42 (RM-303)
    * 6300 MCU v57.20 (RM-217)
    * 6500c MCU v59.45 (RM-265)
    * 6500s MCU v59.60 (RM-240)
    * ... (more in future)

    After downgrade phone coming to dead. But after restore oryginal MCU Software phone will alive.
    From where get fresh firmware packages:

    * 3600s RM-352 MCU Software 56.26
    * 5310 RM-303 - MCU Software 58.58, MCU Software 59.42
    * 6300 RM-217 - MCU Software 57.20
    * 6500c RM-265 - MCU Software 59.45
    * 6500s RM-240 - MCU Software 59.60

    Warning!

    Don't try do SIM-Lock and downgrade your handset because then you could just say: bye bye my darling phone ..

    Q: I if Backup first RPL & PM,
    & some one damage rpl like 123456788?
    Can i restore/write original backup??


    A: no - you can't
    Good Luck!

    ======== terjemahan bebas=============

    Nokia SL3 – Diskusi Fakta & Fiksi.

    salam

    Untuk beberapa waktu kita mencatat HP baru BB5 dengan versi software lebih tinggi dari 50.00.

    Tetapi saya akan mulai dari awal, Ketika Perusahaan Nokia memperkenalkan HP BB5 ke pasar dengan system sekuriti SIMLOCK yang baru (new security system SIMLOCK) adalah tidak mungkin melakukan “unlock”. Cukup lama kita menunggu untuk meng-update software kita sehingga mampu melakukan service penuh bagi HP2 ini – termasuk SIM-Lock.
    Saat ini hamper semua terkunci “lock” pada type BB5 dengan SL2 adalah kemungkinan dapat di-unlock. Sekarang Nokia telah merubah sepenuhnya firmware pada HP dengan “
    SL3 Security Zone”.
    Sejak itu setiap upaya untuk melakukan “downgrade” atau “unlock” HP2 tersebut akan berakhir dengan kerusakan “security zone”. Gejala umumnya adalah:

    * Contact Service
    * kerusakan IMEI - 12345678901?
    * white blinking (LCD tampil putih berkedip)
    * NOKIA logo freeze (hanya tampil Nokia)
    * Security 'Failed to Read'
    * Matot


    Nokia menyebutnya, ide baru – “Protected Application PA_SL3 (SimLockx; x=2 , x+3)” yang melindungi fungsi-nya bilamana di-eksekusi dengan aplikasi khusus. Zona keamanan “Security zone” yang di-format dengan aplikasi 'ProtectedApp_SL' belum kompatibel dengan aplikasi PA_SL2 begitu pula sebaliknya – modifikasi total EEprom waktu flash.

    Semua pabrikan HP saat ini memiliki struktur SL3 dan saya yakin akan lebih bertambah diwaktu mendatang. Sebagai tambahan, Nokia mebangun ulang secara lengkap system RPL dikaitkan dengan server RPL.

    Saat ini HP2 yang SL3 apa saja ?

    berdasarkan perbedaan tipe CPU, tetapi “MCU Software security SimLock3” yang baru- 'SL3' (T-Mobile & Orange)

    * 3600s MCU v56.26 (RM-352)
    * 5310 MCU v58.58, v59.42 (RM-303)
    * 6300 MCU v57.20 (RM-217)
    * 6500c MCU v59.45 (RM-265)
    * 6500s MCU v59.60 (RM-240)
    * ... (more in future)

    Setelah melakukan “downgrade” HP akan matot. Tapi setelah “restore” oryginal MCU Software HP akan hidup.
    Dimana bisa didapatkan paket “fresh firmware”:

    * 3600s RM-352 MCU Software 56.26
    * 5310 RM-303 - MCU Software 58.58, MCU Software 59.42
    * 6300 RM-217 - MCU Software 57.20
    * 6500c RM-265 - MCU Software 59.45
    * 6500s RM-240 - MCU Software 59.60

    Peringatan!

    Jangan coba2 melakukan “SIM-Lock” dan “downgrade “ HP anda sebab jika demikian anda hanya bisa mengatakan: selamat tinggal HP-ku tersayang ..

    Q: Jika saya sudah melakukan Backup RPL dan PM,
    dan seseorang merusakan rpl sehingga jadi seperti “123456788?” - "imei cantik"
    Dapatkan saya melakukan “restore/write” original backup??


    A: Tidak – tidak bias!
    Good Luck!


    credit goes to:
    mm-gsm
    product supporter mt-box
     
    1 person likes this.

Share This Page