6260ku ni kenapa ya mas??

Discussion in 'WD2 & APE' started by ponselcorner, May 19, 2009.

  1. ponselcorner

    ponselcorner Active Member

    Messages:
    194
    Likes Received:
    22
    Trophy Points:
    28
    HELP para master !!!!
    awalnya si cuma contact retailer,namun setelah saya lakukan perbaikan sw yg hasilnya seperti dibawah ini hp malah mati sekarang.mohon masukannya master...duh ampe panik neh:flame:

    oiya,log di bawah ini menggunakan box jaf...ufs,mx-key pun ga jauh beda,proses pengisian mcu,ppm berjalan lancar.tapi tidak demikian saat after flash procecing ato ui setting di ufs.:confused:

    Getting MCU ID
    MCU ID: 0x1081
    FLASH ID0: 007E0001 <=> SPANSION -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 007E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 277E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: C6 00 00 EA 75 01 00 EA 78 01 00 EA 7B 01 00 EA
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-25\RM25PE505360.C1
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-25\RM25PE505360.C1
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-25\RM25PE505360.33
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Languages in ppm: English,Bahasa Mal.,Bahasa Ind. (Apac-3)
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Failed! Aborting!
    Failed to backup imei...
    MCU: C:\Program Files\Nokia\Phoenix\Products\rm-25\RM25PE505360.C1
    Booting phone...
    MCU ID: 0x1081
    BOOT file: C:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x10D8
    Boot is ready...
    FLASH ID0: 007E0001 <=> SPANSION -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 007E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 277E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: C6 00 00 EA 75 01 00 EA 78 01 00 EA 7B 01 00 EA
    Flash ID is 0x007E0001
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7F10; Loader chk: c3
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84B744FEA732D61885166D688E
    MSID decoded: 3E4EBAF7000508A0A9000000
    FAID: AE79C822B9CCCC6961B98B10
    Operation took 0 minutes 25 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Erasing area: 00010000 - 00FFFFFF...
    Erasing area: 02000000 - 02C9FFFF...
    Erasing area: 02FC0000 - 02FEFFFF...
    Operation took 4 minutes 34 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 7 minutes 2 seconds...
    Restarting MCU...
    PPM: C:\Program Files\Nokia\Phoenix\Products\rm-25\RM25PE505360.33
    Booting phone...
    MCU ID: 0x1081
    BOOT file: C:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x10D8
    Boot is ready...
    FLASH ID0: 007E0001 <=> SPANSION -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 007E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 277E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: C6 00 00 EA 75 01 00 EA 78 01 00 EA 7B 01 00 EA
    Flash ID is 0x007E0001
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7F10; Loader chk: c3
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84B744FEA732D61885166D688E
    MSID decoded: 3E4EBAF7000508A0A9000000
    FAID: AE79C822B9CCCC6961B98B10
    Operation took 0 minutes 26 seconds...
    Erasing PPM...
    Found 2 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Erasing area: 02D00000 - 02EFFFFF...
    Operation took 0 minutes 19 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 0 minutes 26 seconds...
    Restarting MCU...
    Flashing Done!
    Operation took 13 minutes 47 seconds...
    After flash processing...
    Waiting for phone to boot...
    Failed! Aborting!

    sebelum & sesudahnya saya ucapkan terima kasih,semoga tuhan membalas amal kebaikan teman2 semua :welcome: :pray:
     
  2. tov4n

    tov4n Well-Known Member

    Messages:
    389
    Likes Received:
    1,001
    Trophy Points:
    103
    coba erase dulu bos
    lalu flash ulang + PM
    atau coba pake UFS

    klu masih contak servise rehot IC flash
     
  3. ponselcorner

    ponselcorner Active Member

    Messages:
    194
    Likes Received:
    22
    Trophy Points:
    28
    uda saya full erase n tembak pm pake ufs,mx-key,jaf tapi masih tetep aja mas..tapi ntar dulu de coba aku angetin ic flashnya.nti aku post lagi hasilnya.thanks
     
  4. Suvokep

    Suvokep New Member

    Messages:
    869
    Likes Received:
    397
    Trophy Points:
    0
    Cpu nya bos bermasalah rehoot dl baru plash ulang..pake versi yg agak tinggian(sebelumnya cek dlpin kabel di pcb pastikan ngga kotor)
     
    ponselcorner likes this.

Share This Page