1110 conser

Discussion in 'DCT-4' started by nuraz, Jun 10, 2009.

  1. nuraz

    nuraz New Member

    Messages:
    35
    Likes Received:
    58
    Trophy Points:
    0
    Hasil Check

    1st Boot: Ok, DCT4, UPP: 2201 [Rh-70] [2.0.8.0]
    2nd Boot: u_2nd.fia, Ver: 4.76.0
    Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
    Algorithm: u_intel.fia, Ver: 4.76.0
    Rebooting Mobile



    Hasil Flash

    1st Boot: Ok, DCT4, UPP: 2201 [Rh-70] [2.0.8.0]
    2nd Boot: u_2nd.fia, Ver: 4.76.0
    Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
    Algorithm: u_intel.fia, Ver: 4.76.0
    Algorithm Ok, MSID: 848B09BDC8F70D3F686F9C62AD
    Decoded MSID: 3E4EBAE9-0046333E-AA000000
    Encoded FAID: 942E5AAE-734921D7-A7453AC9
    IMAGE: rh70_05.540
    Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
    Area2: 0x01010000-0x013BFFFF Erased, Time: 00:41
    Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:02
    Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
    Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
    MCU Flashing Completed, Time: 00:17
    IMAGE: rh70_05.54ej
    Area1: 0x011E0000-0x011EFFFF Erased, Time: 00:00
    Area2: 0x011F0000-0x0137FFFF Erased, Time: 00:17
    PPM Flashing Completed, Time: 00:13
    Flashing Completed, Rebooting Mobile


    Hasil Info

    1st Boot: Ok, DCT4, UPP: 2201 [Rh-70] [2.0.8.0]
    2nd Boot: u_2nd.fia, Ver: 4.76.0
    Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
    Algorithm: u_intel.fia, Ver: 4.76.0
    Algorithm Ok, MSID: 848B09BDC8F70D3F686F9C62AD
    Decoded MSID: 3E4EBAE9-0046333E-AA000000
    Encoded FAID: 942E5AAE-734921D7-A7453AC9
    IMAGE: rh70_05.540
    Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
    Area2: 0x01010000-0x013BFFFF Erased, Time: 00:41
    Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:02
    Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
    Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
    MCU Flashing Completed, Time: 00:17
    IMAGE: rh70_05.54ej
    Area1: 0x011E0000-0x011EFFFF Erased, Time: 00:00
    Area2: 0x011F0000-0x0137FFFF Erased, Time: 00:17
    PPM Flashing Completed, Time: 00:13
    Flashing Completed, Rebooting Mobile


    Hasil UI Setting

    UI Defaults Ok, Time: 00:03
    Set UI Factory Defaults Ok, Time: 00:00
    Set Security Ok, Time: 00:00


    Saya Coba pake trik Master BENUA3 dengan cabut resistor dekat pin Flash ttp bandel N hasil CONSER pake Power Supply, Local Mode pakai power UFS,help me maste-master, tolong solusi N pencerahanya,trim.wasalam
     

    Attached Files:

  2. jims

    jims Super Moderators Super Moderator

    Messages:
    748
    Likes Received:
    1,136
    Trophy Points:
    103
    Kok cnt nya dikosongin?
    [​IMG]
    testself =lcd failed,bisa jadi karena lcd,coba pake lcd ori,atau lcd 1600,tapi flash dg file 1600 juga(jadi 1600 :D)jangan lupa write pm kemudian unlock
     
  3. nuraz

    nuraz New Member

    Messages:
    35
    Likes Received:
    58
    Trophy Points:
    0
    Hasil Check

    1st Boot: Ok, DCT4, UPP: 2201 [Rh-70] [2.0.8.0]
    2nd Boot: u_2nd.fia, Ver: 4.76.0
    Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
    Algorithm: u_intel.fia, Ver: 4.76.0
    Rebooting Mobile


    Hasil Flash

    1st Boot: Ok, DCT4, UPP: 2201 [Rh-70] [2.0.8.0]
    2nd Boot: u_2nd.fia, Ver: 4.76.0
    Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
    Algorithm: u_intel.fia, Ver: 4.76.0
    Algorithm Ok, MSID: 848B09BDC8F70D3F686F9C62AD
    Decoded MSID: 3E4EBAE9-0046333E-AA000000
    Encoded FAID: 942E5AAE-734921D7-A7453AC9
    IMAGE: rh70_05.540
    Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
    Area2: 0x01010000-0x013BFFFF Erased, Time: 00:41
    Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:02
    Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
    Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
    MCU Flashing Completed, Time: 00:17
    IMAGE: rh70_05.54ej
    Area1: 0x011E0000-0x011EFFFF Erased, Time: 00:00
    Area2: 0x011F0000-0x0137FFFF Erased, Time: 00:17
    PPM Flashing Completed, Time: 00:13
    Flashing Completed, Rebooting Mobile


    Hasil Info

    MCU SW : V 5.54 16-08-06 RH-70 (c) NMP
    PPM SW : V 5.54 16-08-06 RH-70 (c) NMP EJ
    Prd.Code: 0536489
    Bpr.Code: 0536354
    Prod.Sn : KDN102435
    HW Vers : 0522
    UEM : 1328
    UPP : 8705
    RFIC Ver: 0500
    DSP Vers: P05w06.v34
    LCD Type: WINTK:MYKS01
    IMEI : 358964-01-381698-3
    SL Conf : 001-01-00000000000
    SL Prof : 000000000000000-2
    SL Var : 00003589640138169800
    SL Aux : 00020000
    HW Sig : 25F2A3E05FC92ED1
    Box Id : 894F894FFFFFFFFF
    MastCode: 67 13 65 65 51
    Provider: GSM Test Equipment
    #pw+ 423 497 543 166 405 +1#
    #pw+ 013 513 235 117 123 +2#
    #pw+ 186 024 003 462 036 +3#
    #pw+ 498 807 612 660 112 +4#
    #pw+ 405 007 621 362 113 +5#
    #pw+ 113 864 233 140 677 +6#
    #pw+ 786 150 104 443 762 +7#


    Hasil UI Setting

    UI Defaults Ok, Time: 00:03
    Set UI Factory Defaults Ok, Time: 00:00
    Set Security Ok, Time: 00:00

    Saya Coba pake trik Master BENUA3 dengan remove resistor dekat pin Flash ttp bandel N hasilnya, CONSER pake Power Supply, Local Mode pakai Power UFS, help me maste-master, tolong solusi N pencerahanya,trim.wasalam
     
  4. Suvokep

    Suvokep New Member

    Messages:
    869
    Likes Received:
    397
    Trophy Points:
    0
    Kayanya versi mcu n ppm nya beda bos...coba pake versi 5.53 goodluck...:D:D:D
     
  5. franc6688

    franc6688 Active Member

    Messages:
    114
    Likes Received:
    26
    Trophy Points:
    38
    bos ...biasanya flahs 1110 harus pake versi 3........selamat mencoba .......tested by meeeeeeeeee
     
  6. over you

    over you Active Member

    Messages:
    142
    Likes Received:
    41
    Trophy Points:
    38
    Coba flash pke versi yg plg rendah..
     
  7. noplek

    noplek Well-Known Member

    Messages:
    483
    Likes Received:
    1,524
    Trophy Points:
    103
    Gmn boss <<<Nuraz>>> dah teratasi blm permasalahannya??? Klo pke software ttep bndel kmungkinan masalah ada pada CPU......:D:D
     
  8. Diamond

    Diamond Active Member

    Messages:
    78
    Likes Received:
    233
    Trophy Points:
    43
    iya benerr... coba pke versi yang terendah dulu.. versi 3
     
  9. nuraz

    nuraz New Member

    Messages:
    35
    Likes Received:
    58
    Trophy Points:
    0
    thanks atas solusi N penceahanya dari master-maste,ntar ta coba lg,trim ya maste.wasalam
     
  10. otong nurdiansyah

    otong nurdiansyah New Member

    Messages:
    8
    Likes Received:
    4
    Trophy Points:
    0
    kalo kasusnya kya gni gmna boz.....
    1st Boot: Ok, DCT4, UPP: 2201 [Rh-93] [2.1.0.0]
    2nd Boot: u_2nd.fia, Ver: 4.79.0
    Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
    Algorithm: u_intel.fia, Ver: 4.80.0
    Algorithm Ok, MSID: 84E9B297E662D6B921EDCB90E3
    Decoded MSID: 3E4EBAE9-00D42B6A-AA000000
    Encoded FAID: 5971117B-FA1E1387-D87C3613
    IMAGE: rh93_07.020
    Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
    Area2: 0x01010000-0x013BFFFF Erased, Time: 00:36
    Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:02
    Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
    Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
    MCU Flashing Completed, Time: 00:17
    IMAGE: rh930_nai7.02me
    Area1: 0x01380000-0x013BFFFF Erased, Time: 00:02
    CNT Flashing Completed, Time: 00:01
    Extracting Contents Package ...
    Init Local Mode Failed
    Contents Package Extracting Failed:
    Process Failed, Repowering Mobile
     

Share This Page