Info update cyclone...

Discussion in 'Cyclonebox' started by dwi naris, Aug 14, 2009.

  1. dwi naris

    dwi naris New Member

    Messages:
    349
    Likes Received:
    324
    Trophy Points:
    0
    PERMISI BANG MOMOD,MAAF KALAU NARUHNYA SALAH MOHON DIPINDAHKAN......


    Note on flashing RAPU units: make sure you obtained CORRECT FBUS CABLE! UFC No.2 (As we tested) NOT working with RAPU phones, because MBUS line is duplicated. We recommend to use GPG FBUS cables, as we done our tests using their cables.

    This is BULK UPDATE, that means you need to download EXE file and click INSTALL. All previously released updates (few days before, rapido nck calc, etc) will be applied automaticlly, loaders will be purged too. You need have only installed installer (this one released in May, avaiable in

    http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe


    Download new update from:RapidShare: 1-CLICK Web hosting - Easy Filehosting


    Best Regards,
    Cyclone Team,
    Stay tuned.
     
  2. dwi naris

    dwi naris New Member

    Messages:
    349
    Likes Received:
    324
    Trophy Points:
    0
    Buat yg susah dowload di rapid.....
     

    Attached Files:

  3. dwi naris

    dwi naris New Member

    Messages:
    349
    Likes Received:
    324
    Trophy Points:
    0
    Part 4,5,6................................................
     

    Attached Files:

    bkcomm and xing cell like this.
  4. dwi naris

    dwi naris New Member

    Messages:
    349
    Likes Received:
    324
    Trophy Points:
    0
    Part 7,8,9..................................
     

    Attached Files:

    bkcomm and xing cell like this.
  5. nanoy

    nanoy Well-Known Member

    Messages:
    161
    Likes Received:
    100
    Trophy Points:
    53
    Hi,
    First of all, happy new year to all of our customers.
    New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).

    =====================
    Installer v1.03
    02.01.2010
    =====================
    - Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
    - Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

    9A28E119033B91D14D22838C86D0D53C
    9DDBFCFE6E73CED7D8C6268C8EB85723
    38F312750F686F9FC9B1B3778774A195
    BAF3A9C3DBFA8454937DB77F2B8852B1
    CAEEBB65D3C48E6DC73B49DC5063A2EE
    F2D76DFAFD66C7F195F278417DF05888
    F682624FFB08F6D955DBE7D9C0485084
    FCB5C510AF7F09F313D9BDE85A707CC0

    - Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
    - After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
    - To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with Software comes few generated files
    - If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
    - SL Area might be repaired using UNLOCK button for SL2 phones
    - RPL Write bugs fixed ("simlock not accepted" after few tries)
    - Path "/" problem fixed
    - Memory manager updated to v4.94
    - New skin manager introduced (6.53) - removed flash files selection bugs
    - GUI redesigned a bit
    - Nokia Connectivity Cable Driver updated to v7.1.22
    - 2760h RM-391 v06.83 Unlock / Relock added
    - 2330c RM-512 v09.55 Unlock / Relock added
    - 2330c-b RM-513 v09.55 Unlock / Relock added
    - 2720f RM-519 v08.42 Unlock / Relock added
    - 2720f-b RM-519 v08.42 Unlock / Relock added
    - 2720f RM-519 v09.55 Unlock / Relock added
    - 2720f-b RM-519 v09.55 Unlock / Relock added
    - SX4 Bypass during BB5 Unlock removed, is no needed anymore
    - Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
    - After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
    - New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
    - 6220c,3600s booting fixed in new firmware
    - New Secure bootloader v02.10 introduced
    - New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
    - Secure BootAgent v1.00 introduced in new firmware
    - Firmware RTOS Code Updated to v6.0.1
    - Slightly code optimizations and stability improvments in new firmware
    - Secure Bootloader upgrade introduced after box maintenance
    - Added support for Cyclone box Hardware REV A116, A117, A118, A119, A11A, A11B, A11C


    Download Link: http://rapidshare.com/files/32908443...xInstaller.exe

    ! BOX FIRMWARE UPDATE IS NEEDED TO USE LATEST UPDATE !

    Best Regards,
    Cyclone Team

    (stay tuned.... in January [​IMG] )
     
  6. alanpapua1

    alanpapua1 New Member

    Messages:
    20
    Likes Received:
    25
    Trophy Points:
    0
    update eror:eek:
     
  7. dentacellular

    dentacellular Active Member

    Messages:
    99
    Likes Received:
    127
    Trophy Points:
    43
    mantap boss lanjut y kl ada update yg baru2 lg
     

Share This Page