3660 cbus boot error

Discussion in 'WD2 & APE' started by awanlah, Sep 28, 2009.

Thread Status:
Not open for further replies.
  1. awanlah

    awanlah New Member

    Messages:
    42
    Likes Received:
    3
    Trophy Points:
    0
  2. awanlah

    awanlah New Member

    Messages:
    42
    Likes Received:
    3
    Trophy Points:
    0
    aduh upload salah ya pokonya tulisannya
    1st Boot Ok, WD2, UPP: 1081
    Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
    Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
    Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
    Algorithm: w3_amd.fia, w3_cbusb.fia, Ver: 4.57.0
    Algorithm Ok, MSID: 84B035A5C5D6082784FFFCD548
    Decoded MSID: 3E4EBAF7-00C07391-A8000000
    Encoded FAID: FA2AB52C-35F80080-D7C600F8
    Cbus Boot Error: 9
    Error Data1:
    00000000: 00 96 84 B0 35 A5 C5 D6 08 27 84 FF FC D5 48 8B ....5....'....H.
    00000010: 00 7E 26 02 00 10 01 10 00 04 01 00 7E 26 02 00 .~&.........~&..
    00000020: 10 01 10 00 06 00 00 01 00 00 00 00 00 00 00 FF ................
    00000030: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF A2 ................
    Error Data2:
    00000000: A3 72 72 7E 26 02 00 10 01 10 00 02 01 00 7E 26 .rr~&.........~&
    00000010: 02 00 10 01 10 00 04 01 00 7E 26 02 00 10 01 10 .........~&.....
    00000020: 00 06 00 00 01 00 00 00 00 00 00 00 FF FF FF FF ................
    00000030: FF FF FF FF FF FF FF FF FF FF FF FF A2 C3 72 00 ..............r.
    Before taking screenshot, expand this window !
    Process Failed, Repowering Mobile
     
  3. andixmio

    andixmio New Member

    Messages:
    306
    Likes Received:
    120
    Trophy Points:
    0
    Cek kabelnya bro..pastikan kbel msh bgus..
     
  4. awanlah

    awanlah New Member

    Messages:
    42
    Likes Received:
    3
    Trophy Points:
    0
    kalo kabel okeh boss pake sm hp lain tested 100% pokonya cek boot ok read uem gagal format sama yg laen2 juga ga bisa cuman erase doang yg bisa..ada solusi laen ga ya pliss :pray::pray::pray:
     
  5. andixmio

    andixmio New Member

    Messages:
    306
    Likes Received:
    120
    Trophy Points:
    0
    Cek zokus bro..or gnti
     
    anjarsaridut likes this.
  6. sadermo

    sadermo Super Moderators Super Moderator

    Messages:
    2,086
    Likes Received:
    2,110
    Trophy Points:
    123

    sama bos,,,aku juga ngalami hal yg sama,,cuma hpnya 3230,,persis log nya kaya punya bos klo flas pakek ufs,,,,nih barusan aku flash pakek MXQ trus unlock pakek JAF,,keluar NOKIA berjabatan tangan,,jadilah duit,cobak aja pakek cara ini dulu
     
    anjarsaridut likes this.
  7. awanlah

    awanlah New Member

    Messages:
    42
    Likes Received:
    3
    Trophy Points:
    0
    masalahnya aku cuman punya ufs n jaf MXQ nya blom punya, klo pake punya alat yg ada bisa ga boss? gmn caranya?
     
  8. sadermo

    sadermo Super Moderators Super Moderator

    Messages:
    2,086
    Likes Received:
    2,110
    Trophy Points:
    123

    gmn sikon hp skrng???masih hidup or matot???

    klo blm ada MXQ cobak flash ama jaf ja dulu,,trus log nya pm ksini
     
    anjarsaridut likes this.
  9. anjarsaridut

    anjarsaridut New Member

    Messages:
    11
    Likes Received:
    5
    Trophy Points:
    0

    nambahin dikit maaf bos sadermo,,klo blm punya box jaf bisa gak pakek ufs ja:confused::confused::confused::confused:
     
  10. awanlah

    awanlah New Member

    Messages:
    42
    Likes Received:
    3
    Trophy Points:
    0
    kondisi hp sblomnya blank brapa detik mati sekarang sdh di full erased pake jaf matot :frusty::frusty::frusty:
    logny kaya ginih
    Getting MCU ID

    MCU ID: 0x1081
    FLASH ID0: 267E0001 <=> SPANSION -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 267E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 267E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\Nhl-8 3660\NHL83050.8C1
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\Nhl-8 3660\NHL83050.8C1
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\Nhl-8 3660\NHL83050.832
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Failed! Aborting!
    Failed to backup imei...
    MCU: C:\Program Files\Nokia\Phoenix\Products\Nhl-8 3660\NHL83050.8C1
    Booting phone...
    MCU ID: 0x1081
    BOOT file: C:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x10D8
    Boot is ready...
    FLASH ID0: 267E0001 <=> SPANSION -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 267E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 267E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Flash ID is 0x267E0001
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7F10; Loader chk: 86
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84B035A5C5D6082784FFFCD548
    MSID decoded: 3E4EBAF700C07391A8000000
    FAID: 52F34EEC11E5F2254C346EFC
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_cbusb.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x2020; Loader chk: 7f
    Additional Loader is ready...
    Operation took 0 minutes 26 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Error erasing area: 00000000 - 0001FFFF
     
  11. sadermo

    sadermo Super Moderators Super Moderator

    Messages:
    2,086
    Likes Received:
    2,110
    Trophy Points:
    123
    cobak klo sofwere dah mentok,,rehot ic ram,,,ntar klo tetep matot dan pusing2,,hp kembalikan bling putih ja,,tak kash ntar carane???wekekek
     
  12. awanlah

    awanlah New Member

    Messages:
    42
    Likes Received:
    3
    Trophy Points:
    0
    teuteup boss.gmn carane kembaliin blank putih bos..minta dong biar jaim dikit ama konsumen malu dong masuk blank keluar mato hehehehheh:D:D:D:D
     
  13. sadermo

    sadermo Super Moderators Super Moderator

    Messages:
    2,086
    Likes Received:
    2,110
    Trophy Points:
    123

    emang dah mentok tuh,,,gak nyesel gak dapat dwit???cobak flash mcu ja,,trus ppm,,klo udah masuk semua flash ppm ma mcu bareng,,,ntar klo udah bener2 mentok,,dgn 1 jmper bisa ngembalikan hp blank,,biar gak di komplin pelanggan,,tak mbuat dulu trik gambarnya,,ntar tak pm ksini
     
  14. awanlah

    awanlah New Member

    Messages:
    42
    Likes Received:
    3
    Trophy Points:
    0
    sama ini boss satu lg 7610 nya log nya kaya ginih maksutnya apa tuh yg musti di lakuin
    Getting MCU ID

    MCU ID: 0x1081
    FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 22FA00EC <=> SAMSUNG (SEC) -> K8S6415ETA Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Failed! Aborting!
    Setting local mode...
    Failed! Aborting!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-51\
    Scanning for ini files...
    INI file .ini is missing. Continue searching for second ini type...
    Changing flashing settings...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-51\RH51_52_67_68PE605220.C1
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-51\RH51PE605220.02
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Failed! Aborting!
    Failed to backup imei...
    MCU: C:\Program Files\Nokia\Phoenix\Products\RH-51\RH51_52_67_68PE605220.C1
    Booting phone...
    MCU ID: 0x1081
    BOOT file: C:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x10D8
    Boot is ready...
    FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 22FA00EC <=> SAMSUNG (SEC) -> K8S6415ETA Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Flash ID is 0x22F800EC
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7F10; Loader chk: ac
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 842E928F9CBDB60DCFFAE80634
    MSID decoded: 3E4EBAF700DCA995A9000000
    FAID: 90A8621FF2D2642FBD4AE10D
    Operation took 0 minutes 25 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Erasing area: 00010000 - 00FFFFFF...
    Erasing area: 02000000 - 0287FFFF...
    Erasing area: 02FC0000 - 02FEFFFF...
    Operation took 5 minutes 1 seconds...
    Writing...
    Permanent Data Restore FAILED!
    Operation took 10 minutes 24 seconds...
    Restarting MCU...
    Failed! Aborting!
     
  15. tlogo

    tlogo Well-Known Member

    Messages:
    1,504
    Likes Received:
    426
    Trophy Points:
    93
    log pakai ufs gimana boss........
     
  16. boyzkod

    boyzkod Member

    Messages:
    19
    Likes Received:
    2
    Trophy Points:
    13
    ic bluetooth 100% worked
     
Thread Status:
Not open for further replies.

Share This Page