Startech ST67 “Insial Slave"

Discussion in 'CPF Box' started by tomlatu, Nov 4, 2009.

  1. tomlatu

    tomlatu Well-Known Member

    Messages:
    305
    Likes Received:
    141
    Trophy Points:
    53
    - Startech ST67, tampil “Insial Slave” or “Slave Initialing”.
    Buka phonebook, hanya muncul sebentar “Meproses Phonebook”
    Buka sms, hanya muncul “Membuka”
    - saya sdh baca beberapa thread soal tsb.
    - yang sdh dikerjakan:
    - disassembly, cek cpu > ada 2, mt6226 (dibawah keytone board) dan mt6205
    - detect pinout, pake kabel E103:
    Is detecting Vcc and Gnd... ...
    Vcc: Null
    Gnd: 6
    Is detecting the short circuit pin... ...
    Has not found the short circuit pin.
    Is detecting,confirmed the phone is connected, and press the POWER ON/OFF key ......
    MT6226 RX = 5 TX = 3
    Is detecting second group of RX and TX ...
    Is detecting,confirmed the phone is connected, and press the POWER ON/OFF key ......
    Second group of RX and TX:
    * MT6205 RX = 4 TX = 2

    - Bisa read flash mt6226:
    Information:
    Vacant Ports:COM3 COM18 COM19
    Current Port:COM18
    Waiting for phone's response,press the Power on the phone...
    Connecting...
    Hardware version: 8A02
    CPU Type: 6226
    CPUID :412AC8B3
    Boot download finished!
    Flash Type: SPANSION S71PL127xB0
    Flash Size: 0x01000000
    Eprom Size: 0x00400000
    Rate adjustment finished.
    Flash reading finished!
    Data has been saved in E:\Handphone\Manual Repair\HP CHINA\StarTech ST67\read_st67_mt6226.bin,file size is 16M.
    1122[User Lock]
    Found 1 possible passwords.
    >>Please send the backup flash file to CPF-BOX or phones-china@hotmail.com, we can add forum coins to you.thanks in advance.

    - Tidak bisa read flash 6205:
    Connecting...
    Hardware version: 8B00
    CPU Type: 6205
    Boot download finished!
    Please retry to connect with the phone,or to press the 'Terminate'button.
    Waiting for phone's response,press the Power on the phone
    >>Terminate.

    - Pertanyaan saya:
    - sebelum msk hardware,
    - apakah cukup format dan flash mt6226 serta repair imei..?
    - atau harus juga format dan flash mt6205, padahal di-read tdk bisa.
    - thnx.
     
  2. macfins

    macfins New Member

    Messages:
    24
    Likes Received:
    6
    Trophy Points:
    0
    kl menurut saya mt6205 bermasalah di Hardware, coba panasi mt6205 dan ic flashnya. lalu read lagi utk cpu mt6205 nya
     
  3. tomlatu

    tomlatu Well-Known Member

    Messages:
    305
    Likes Received:
    141
    Trophy Points:
    53
    thnx oom.. nnt saya coba dulu.!
     
  4. 54n

    54n New Member

    Messages:
    7
    Likes Received:
    2
    Trophy Points:
    0
    coba format 6226 dulu (jangan lupa buat backup dulu)
    sebab klo ga salah st 67 ada security nya di area FAT yg akan ikut hilang bila diformat
    bila itu terjadi hp akan normal setelah di format,tapi beberapa hari/minggu kemudian akan kambuh lagi

    mohon koreksi klo salah:D
     
  5. tomlatu

    tomlatu Well-Known Member

    Messages:
    305
    Likes Received:
    141
    Trophy Points:
    53
    nyerah kalo musti sentuh ic nya.. takut malah matot. lagi pula blm punya stock-nya. terpaksa dipulangin saja ke user.
     
  6. Ayick

    Ayick New Member

    Messages:
    30
    Likes Received:
    23
    Trophy Points:
    0
    Waaah ....
    kok nyerah booos...
    filing g enak y?????????
    klo q lanjut nich. udah tak flash bolak-lik...
    Skrg jd BO2k HPnya..........
    puyeng nich kepala,,
    :frusty::frusty::frusty:
    buat master2 yg px solusi SHAREd doooooooooonk!!!!!!!!
    :cry::cry::cry::cry::cry::cry:
     

Share This Page