6275i dg LOG yg susah dipahami

Discussion in 'Nokia CDMA' started by ponselcorner, Nov 17, 2009.

  1. ponselcorner

    ponselcorner Active Member

    Messages:
    194
    Likes Received:
    22
    Trophy Points:
    28
    LOG dg MX KEY :

    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    ASIC ID: 0x2051 [TikuEdge ver: 2.0]
    SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.70.1 revision: 0.7 size: 0x2398
    Supported Ids: 1051, 1052, 2051
    FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
    FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND Hardware: 1MUX(M)
    FlashID2: 0000 0001 [unused/removed]
    FlashID3: 0000 0001 [unused/removed]
    ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
    Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.70.1 revision: 0.7 size: 0x84A0
    Supported Ids: 1051, 1052, 2051
    Performing Flash Authentication ...OK
    UEM ID: 00D9AC73:3B8ADA60
    ASIC type: 6
    UEM Imei: 01109819723
    Flash Imei: 01109819723
    RPL saved to "C:\mobileEx\3.2\data\backup\RPL\01109819723_BACK. rpl"
    Processing file: BL290V0100.nep
    ASIC ID: 0x2051 [TikuEdge ver: 2.0]
    SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.70.1 revision: 0.7 size: 0x2398
    Supported Ids: 1051, 1052, 2051
    FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
    FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND Hardware: 1MUX(M)
    FlashID2: 0000 0001 [unused/removed]
    FlashID3: 0000 0001 [unused/removed]
    ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
    Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.70.1 revision: 0.7 size: 0x84A0
    Supported Ids: 1051, 1052, 2051
    Performing Flash Authentication ...OK
    UEM ID: 00D9AC73:3B8ADA60
    Programming MCU ...
    FlashImage: BL290V0100.nep
    [TIKU BT2,TIKU ALGORITHM] size: 12.28 MB
    Supported Ids: 1051, 1052, 2051
    Area [00000000-0001FFFF] erased in 0.890 s
    Area [00020000-00DFFFFF] erased in 1 min 40.172 s
    Flash programming ...
    Programming completed in 2 min 17.531 s
    File Processed in 4 min 16.766 s
    Processing file: BL290V0100_nok.ucp_g
    ASIC ID: 0x2051 [TikuEdge ver: 2.0]
    SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.70.1 revision: 0.7 size: 0x2398
    Supported Ids: 1051, 1052, 2051
    FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
    FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND Hardware: 1MUX(M)
    FlashID2: 0000 0001 [unused/removed]
    FlashID3: 0000 0001 [unused/removed]
    ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
    Algorithm: te_oncsm.fia [TIKU MON CSM] version: 4.70.1 revision: 0.7 size: 0x5648
    Supported Ids: 1051, 1052, 2051
    Programming Content Pack ...
    FlashImage: BL290V0100_nok.ucp_g
    [TIKU BT2,TIKU MON CSM] size: 4.91 MB
    Supported Ids: 1051, 1052, 2051
    Mass Memory Storage Device detected.
    Configuring MM bus ...
    Formating partition ...OK
    Opening MM device ...
    Flashing terminated with error(s) in 5 min 11.453 s
    RX Buffer: FFF372


    LOG dg JAF :

    MCU ID: 0x2051
    BOOT file: C:\Program Files\ODEON\JAF\Flash\te_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x2398
    Boot is ready...
    FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
    Flash ID is 0x22E800EC
    Flash loader is C:\Program Files\ODEON\JAF\Flash\te_oncsm.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x5648; Loader chk: b8
    Loader is ready...
    Operation took 0 minutes 16 seconds...
    Erasing Content Pack...
    Mass Memory Device Detected...
    MM Bus Configured...
    Formating MM...Format failed!




    mohon pencerahannya dg yg saya bold merah itu...mang apa si artinya/pd sector mana yg mengalami kerusakan.yg udah saya lakukan :
    1. full erasse & per area flash,full flash,write pm dg JAF & MX key
    2. flash dg 2 macam fw v. 200 & v.100
    3. flash secara partial mcu,ppm,content satu persatu <namun menginjak flashing PPM/CONTENT pasti putus dg log error diatas>

    :pray: cendol siap matang neh.....hehe
     
  2. ponselcorner

    ponselcorner Active Member

    Messages:
    194
    Likes Received:
    22
    Trophy Points:
    28
    ayo master djawir ato temen2 laennya ditunggu solusinya neh.....mana responnya ????? apa masih pd sibuknya semuanya.
     

Share This Page