N95 Dual Sim Restart

Discussion in 'Chinese Phone' started by TOTAL PART, Nov 13, 2007.

  1. TOTAL PART

    TOTAL PART Administrator Staff Member Administrator

    Messages:
    701
    Likes Received:
    837
    Trophy Points:
    103
    kalau salah menggunakan kabel atau booting nya nggak pas waktu pencet power, hasil nya sbb :
    ==== log opened: [09/11/2007 02:12:29 ã] ====
    Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.exe
    Loading data, wait...
    [Infinity Box] v1.60
    S/N: total gsm
    Wait...
    Device: Autodetect 6205-6227 NOR
    Done
    COM4 ready
    WARNING ! Settings will be cleared, user data erased, Imei set to default value !
    Make flash backup before this procedure !

    Do you want to continue ?
    Action: reset settings
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    COM4 [VCP3] selected
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    9600
    error: boot phase#2/1 failed
    Can't initialize test mode !
    Possible reasons:
    1. communication fault, repeat required operation
    2. eeprom serious damaged, use repair eeprom files or use other unlock/format method
    Operation failed !
    Finished, time used: 3 sec
    Remove/Install battery now !



    dibawah ini menggunakan kabel 18 pin dgn code PL-22
    dan waktu booting tekan power agak lama, hasil nya ok :
    ==== log opened: [12/11/2007 09:36:35 Õ] ====
    Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.exe
    Loading data, wait...
    [Infinity Box] v1.60
    S/N: total gsm
    Wait...
    Device: Autodetect 6205-6227 NOR
    Done
    COM4 [VCP1] selected
    Device: Autodetect 6205-6227 NOR
    Checking data, wait...
    advanced flash detection active
    Action: read NOR flash
    Boot...
    Press and HOLD Power button now !
    baud autodetection active
    19200
    Connecting, wait...
    Initializing[6226:8A02]...
    error: initialize step#1 failed
    Release Power button now !
    in case of initial connection problem: on/off "Boot baudrate autoselect" box.
    Boot Fail
    Finished, time used: 14 sec
    Remove/Install battery now !
    COM4 [VCP1] selected
    Device: Autodetect 6205-6227 NOR
    Checking data, wait...
    advanced flash detection active
    Action: read NOR flash
    Boot...
    Press and HOLD Power button now !
    baud autodetection active
    19200
    Connecting, wait...
    Initializing[6226:8A02:8A01]...
    high speed disabled
    boot step size: 0002
    Release Power button now !
    Boot Done
    Initialize...
    detecting chip #00 in region #00...
    flash: EC257E25082501:29EA0000000000
    flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
    number of flash chip/regions detected: 01/01
    Initialize Done
    Set baud...
    921600
    Set baud Done
    Identification...
    device parameters autodetection in progress..
    detecting chip #00 in region #00...
    flash: EC257E25082501:29EA0000000000
    flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
    number of flash chip/regions detected: 01/01
    total flash region size: 01000000
    detect device identification, method #1...
    detection phase #1...
    detect device parameters finished
    structure: 2nd [enhanced] (or higher) generation
    identification data Ok
    identification data backup saved: id.2B73134B.[E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN_9D80AA27].rpl
    identification detection finished
    device-id: 2B73134B
    protocol ver: 04
    ver. sw1: E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN
    ver. sw2: E553_XZY1.01.1
    ffs offset/size: 00800000/001FF000
    detecting eeprom area in 1 chip(s)...
    flash: EC257E25082501:29EA0000000000
    checking area[00000000]: 00000000-00FFFFFF...
    eeprom found near: 00E00000
    detecting eeprom size...
    eeprom size: 00200000
    eeprom chip: 00
    eeprom area: 00000000:00E00000-00FFFFFF
    reading [flash[E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN]]...
    file saved: backup_flash[E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN]_20071112-094715.B0M.bin
    file saved: backup_system_log_2B73134B_E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN_9D80AA27_20071112-094732.B0X.bin
    Finished, time used: 597 sec
    Remove/Install battery now !
    WARNING ! Settings will be cleared, user data erased, Imei set to default value !
    Make flash backup before this procedure !

    Do you want to continue ?
    Action: reset settings
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    COM4 [VCP1] selected
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200
    Initializing[6226:8A02]...
    Connecting, wait...
    Release Power button now !
    Phone detected, wait...
    Hardware: MT6226,E02
    Date: 2005.04.12
    Version: 1.0
    Version: E553_XZY1.01.1_26S01
    Version: M500Z_05C_HW
    detecting structure #2...
    done
    imei: 38400654824817
    warning: wrong packet cs
    warning: wrong packet cs

    185 of 210 items cleared
    0 items remains
    Finished, time used: 84 sec
    Remove/Install battery now !

    Hp sudah nggak restart lagi, dan normal seperti biasa.
    tapi ada yg tau kalau wrong packet cs (tulisan merah) ini apa ya ??
    thanks
     
  2. irada

    irada New Member

    Messages:
    26
    Likes Received:
    24
    Trophy Points:
    0
    pin out di infiniti gak sesuai.........!!!!
     
  3. bestncheap

    bestncheap New Member

    Messages:
    342
    Likes Received:
    88
    Trophy Points:
    0
    beli dimana om kbl pl22 nyaa....
    mau dunk.......... :)

    br

    bnc
     
  4. TOTAL PART

    TOTAL PART Administrator Staff Member Administrator

    Messages:
    701
    Likes Received:
    837
    Trophy Points:
    103
    kalau urusan kabel, sejak tahun 2001 (kabel dct3) hingga sekarang selalu BNC cable yg ok.
    promo dikit ( boleh tuh hubungi bnc ).
     
  5. kak4khp

    kak4khp New Member

    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    0
    om...ada pinoutnya ga???
    buat kabelnya...

    Br
     
  6. bestncheap

    bestncheap New Member

    Messages:
    342
    Likes Received:
    88
    Trophy Points:
    0
    agh.. si boss bisa aja....

    br

    bnc
     
  7. tingteng

    tingteng Member

    Messages:
    21
    Likes Received:
    8
    Trophy Points:
    13
    tulisan merah itu spt nya "deblocking" atawa decrypted address. itu kalo nurut technical issue ARM MT6205b, MT6226(a/b/ab/ba),MT6228
     
  8. audi

    audi Moderator Moderator

    Messages:
    94
    Likes Received:
    17
    Trophy Points:
    18
    bukan gak sesuai mas, tapi NOKLA N95 banyak macam dan typenya :)
     
  9. jufong

    jufong Well-Known Member

    Messages:
    1,261
    Likes Received:
    137
    Trophy Points:
    73
    aku juga dapet bos
    malah minta unlock
    kabel nya nggak mau connect
    pinout nya salah pa
     
  10. jefflino

    jefflino New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    please how can i get the box that works all chineese mp4 phones
     
  11. emycell

    emycell New Member

    Messages:
    51
    Likes Received:
    42
    Trophy Points:
    0
    nokia n95 2sim

    untuk n95 2sim salah di grondya saja
    coba rubah (pindahkan GRND ke pin 12 saja bos) udah tak tes 5 hp sukses dgn masalah restat kalau di masukkan sim.
    selamat mencoba

    [​IMG]
     
  12. zcare

    zcare New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    tanx..................................................
     
  13. nining

    nining New Member

    Messages:
    12
    Likes Received:
    1
    Trophy Points:
    0
    aq punya juga masalahnya gitu ...idupin restart...mau bli infinitynya di mana nihh...... help me plzzz.....
     
  14. aktel

    aktel New Member

    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    how much is this?
    which is the best machine to buy?
     
  15. ayuz_kwok

    ayuz_kwok Member

    Messages:
    92
    Likes Received:
    8
    Trophy Points:
    18
    coba pake autofinder bos..
     
  16. iwen

    iwen New Member

    Messages:
    117
    Likes Received:
    26
    Trophy Points:
    0
    ini katanya unt yg call lgsg restar coba pake code bgini:
    HERE IS THE SOLUTION FOR N95
    TRIPPING OFF ON CALL MAKING

    ENTER THIS CODE
    *#3646633#

    GOTO misc SELECT item 6,
    and GOTO amr and press O.K botton
    AND ALL IS WELL

    just use this code to clear n95 restart while u press send button

    kalo kode itu di masukin kita juga bisa melihat lebih jauh di dalam menunya yg nb setingan "tanpa sim" terbatas, paling juga reset factory seting masukkan 1122 udah. tapi kalo yg atu ini unt yg ga punya box heheehe coba-coba aja
     
  17. akira

    akira New Member

    Messages:
    70
    Likes Received:
    10
    Trophy Points:
    0
    pin out di infiniti gak sesuai.........!!!! setuju:thumb::thumb::thumb::thumb::thumb:
     
  18. quyak

    quyak New Member

    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    hai new comer ne thank sinfonya
     

Share This Page