7610 starup failed,contact the retailer

Discussion in 'WD2 & APE' started by andixmio, Apr 27, 2010.

  1. andixmio

    andixmio New Member

    Messages:
    306
    Likes Received:
    120
    Trophy Points:
    0
    log info ufs:

    MCU SW : V 6.0522.0 02-06-05 RH-51 (c)NMP
    PPM SW : V 6.0522.0 02-06-05 RH-51 (c)NMP.33
    BT Vers :
    Prd.Code: 0514521
    Bpr.Code: 0511637
    Prod.Sn : DDE722549
    HW Vers : 6003
    UEM : 144
    UPP : 4225 [1081]
    RFIC Ver: 0204
    DSP Vers: CN5.10
    IMEI : 354330-00-184350-0
    SL Conf : 001-01-00000000000
    SL Prof : 000000000000000-5
    SL Var : 00553543300018435000
    SL Aux : 00055555
    HW Sig : 181D7AA61A3909A7
    Box Id : 894FFEB719B5DB3D
    BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    MastCode: 03 53 53 33 37
    Provider: GSM Test Equipment
    #pw+ 818 831 735 630 345 +1#
    #pw+ 794 140 412 213 357 +2#
    #pw+ 916 202 433 454 117 +3#
    #pw+ 729 990 546 751 602 +4#
    #pw+ 802 051 421 042 365 +5#
    #pw+ 948 062 463 632 773 +6#
    #pw+ 436 047 050 462 252 +7#

    langkah yang sudah dilakukan;

    1. Full erase
    2. Flash dengan v tinggi
    3. Write PM
    4. Init simlock
    5. FUA(failed)

    monggo yang mau share pengalamannya,,kasih petunjuk ke saya:tea::tea:
     

    Attached Files:

  2. adityaharisaputra

    adityaharisaputra Moderator Moderator

    Messages:
    793
    Likes Received:
    720
    Trophy Points:
    103
    tangan DEwa.. 3 jari..??
     
  3. tlogo

    tlogo Well-Known Member

    Messages:
    1,504
    Likes Received:
    426
    Trophy Points:
    93
    ...boss ni ngetes nih...he..2x...:peace:
     
  4. sembrani

    sembrani Guest Super Member

    Messages:
    1,314
    Likes Received:
    701
    Trophy Points:
    123

    po iyoooo :gossip: :gossip: :gossip:
     
  5. atha63

    atha63 New Member

    Messages:
    47
    Likes Received:
    8
    Trophy Points:
    0
    sama nih bosss kasusnya. tolong solusi dong. sampe pusing nih,kudu gimana lg. FUA pasti failed:mad::mad::mad:
     
  6. sembrani

    sembrani Guest Super Member

    Messages:
    1,314
    Likes Received:
    701
    Trophy Points:
    123
    dah coba di bolak balik kaya gini bos

    1. Full erase
    2. Flash dengan v tinggi
    3.FUA
    4.write pm
    5.ui seting

    ato

    3.write pm
    4.FUA

    intinya ui setting terakhir kalo perlu sambil colokin cas
     
    Aminudinn likes this.
  7. tataki_ueda

    tataki_ueda Moderator Moderator

    Messages:
    688
    Likes Received:
    1,072
    Trophy Points:
    103
    :gossip::gossip::gossip::gossip: iya kali ya, jadi takut salah ngomong...:tape::tape::tape::censor::censor::censor::censor:
    coba ikut nambahin ya...
    bos, coba dong kirim log error nya saat format user area. trs, kalo di3 jari mati ditengah jalan atau selesai tp msh tetep start up failed?
    Sahabat Rosul pernah betanya.. siapa yang harus paling saya hormati ya Rosul? Nabi menjawab, Ibumu?"terus siapa lagi ya Rosul,"tanya sahabat.Nabi menjawab lagi, Ibumu.. terus siapa lagi, nabi menjawab.. ibumu lalu baru kemudian ayahmu.
    dari kisah diatas saya dapat mengambil hikmahnya. jika hape contact retailer apa yang harus saya kerjakan dulu? softwarenya, lalu??? softwarenya lagi... lalu softwarenya lagi,, baru hardwarenya...:blah::blah::blah::blah: hehehehehhe...:focus:
    coba dulu erase alamat ini 0287FFFF TO 02FC0000 Trs full flash lalau give a good pm ui settings init sim locks.

    best regards, tataki_ueda
     
  8. jagoanneon

    jagoanneon Moderator Moderator

    Messages:
    355
    Likes Received:
    374
    Trophy Points:
    0
    ane juga nch pny kasus yg sama ....

    cuman pny ane sll err cmd 14

    kira2 yg rusak ram na y???
    para master muhun bantuannya y........

    nich log na

    Booting phone...
    MCU ID: 0x1081
    BOOT file: C:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Boot size is 0x10D8
    Boot is ready...
    FLASH ID0: 00010000 <=> Flash -> not used Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 0
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07 00
    Flash ID is 0x00010000
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_amd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Loader size is 0x7F50; Loader chk: 8f
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 846381ACCE6B81E1506D86CB4A
    MSID decoded: 3E4EBAF700C75959A9000000
    FAID: 7757B411A94E5ED9A86802FE
    Operation took 0 minutes 16 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Erasing area: 00010000 - 00FFFFFF...
    Erasing area: 02000000 - 0287FFFF...
    Erasing area: 02FC0000 - 02FEFFFF...
    Operation took 0 minutes 3 seconds...
    Writing...
    Error cmd: 14!
    Addr: 00000000
     
  9. atha63

    atha63 New Member

    Messages:
    47
    Likes Received:
    8
    Trophy Points:
    0
    MCU SW : V 6.0522.0 02-06-05 RH-51 (c)NMP
    PPM SW : V 6.0522.0 02-06-05 RH-51 (c)NMP.33
    BT Vers :
    Prd.Code: 0516838
    Bpr.Code: 0544172
    Prod.Sn : PEO045825
    HW Vers : 7033
    UEM : 144
    UPP : 4225 [1081]
    RFIC Ver: 0205
    DSP Vers: CN5.10
    IMEI : 356965-01-253858-7
    SL Conf : 001-01-00000000000
    SL Prof : 000000000000000-5
    SL Var : 00553569650125385800
    SL Aux : 00055555
    HW Sig : 53ED20E256BCBF67
    Box Id : 894F8BE8FFFFFFFF
    BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
    MastCode: 31 00 17 20 25
    Provider: GSM Test Equipment
    #pw+ 786 150 707 413 367 +1#
    #pw+ 352 946 171 071 556 +2#
    #pw+ 332 036 355 042 240 +3#
    #pw+ 406 197 422 473 101 +4#
    #pw+ 326 296 440 404 102 +5#
    #pw+ 288 565 205 657 370 +6#
    #pw+ 906 192 723 463 700 +7#
    BT Repair Done, Time: 00:02
    User Area Format Failed
    00000000: 01 01 E0 00 FF 2D 00 00 .....-..

    ini log infonya pake ufs bossss. sampe bingung nih ngerjaiin yg mana lg. ic ram udah di reball,hasilnya tetap aja. format 3 jari,mati di tengah jalan. bikin pusing nih bro:confused::(:(
     
  10. tataki_ueda

    tataki_ueda Moderator Moderator

    Messages:
    688
    Likes Received:
    1,072
    Trophy Points:
    103
    benernya kasus kaya' py boss udah sering terjadi, dan sering dibahas juga koq.
    no coment,:tape::tape::tape: just pliss cek this one!!!! http://forum.djawir.com/wd2-ape-42/7610-ga-mau-format-user-area-49741/
     
  11. tataki_ueda

    tataki_ueda Moderator Moderator

    Messages:
    688
    Likes Received:
    1,072
    Trophy Points:
    103
    coba pake kabel lainya boss, maksimalkan di konektivitas kabel dulu, misal dg dimodif dulu kabelnya dg kasih capasitor gnd-mbus.atau ngflashnya sambil dicarge.. kalo tetep masih gak mau, berarti ic flash bermasalah..
     
  12. cociy

    cociy New Member

    Messages:
    34
    Likes Received:
    1
    Trophy Points:
    0
    ic flashnya tuh boss...yg 128 nya...100%
     
  13. cociy

    cociy New Member

    Messages:
    34
    Likes Received:
    1
    Trophy Points:
    0
    reball bos .backup dulu emienya..........dijamin bos:rock::rock::rock::rock::rock:
     
  14. Aminudinn

    Aminudinn New Member

    Messages:
    55
    Likes Received:
    7
    Trophy Points:
    0
    Makasih solusinya langsung tulis nota untuk 7610 start up filed, setelah erase flash terus full flash, terus FUA Mantap bro............ sekali lagi terima kasih............
     

Share This Page