NOKIA 1650 Error cmd: 14!

Discussion in 'DCT-4' started by deepak kumar39, Aug 16, 2010.

  1. deepak kumar39

    deepak kumar39 New Member

    Messages:
    54
    Likes Received:
    61
    Trophy Points:
    0
    NOKIA 1650 Error cmd: 14!

    Getting MCU ID
    MCU ID: 0x2292
    FLASH ID0: 327E0001 <=> SPANSION -> 71NS128P Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\Rm-305\rm305_06.000
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\Rm-305\rm305_06.000
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\Rm-305\rm305_06.00mg
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Languages in ppm: English,Hindi,Marathi
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\Rm-305\rm305_06.000
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\Rm-305\rm305_06.00mg
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\Rm-305\rm3050_nai6.00mg
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Languages in ppm: English,Hindi,Marathi
    MCU: C:\Program Files\Nokia\Phoenix\Products\Rm-305\rm305_06.000
    Booting phone...
    MCU ID: 0x2292
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 327E0001 <=> SPANSION -> 71NS128P Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E320100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: 8b
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84EB63E5B60EF8A0CA718B7678
    MSID decoded: 3E4EBAE90014356DA9000000
    FAID: 481E0C7D53C972B492416BF8
    Operation took 0 minutes 10 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 01000000 - 0100FFFF...
    Erasing area: 01010000 - 0179FFFF...
    Erasing area: 017A0000 - 017EFFFF...
    Erasing area: 01F00000 - 01FDFFFF...
    Operation took 0 minutes 43 seconds...
    Writing...
    Error cmd: 14!
    Addr: 01000064


    ANY SOLUSTION SEND ME
     
  2. tataki_ueda

    tataki_ueda Moderator Moderator

    Messages:
    688
    Likes Received:
    1,072
    Trophy Points:
    103
    have you try with other tool and version of firmware? if you have done. try to clean your pcb, if still same. it is upp proble. try to rehot or change your upp.
     
  3. adityaharisaputra

    adityaharisaputra Moderator Moderator

    Messages:
    793
    Likes Received:
    720
    Trophy Points:
    103
    TRHEAD UDAH PERNAH DIBAHAS:focus:
    SEARCH DULU MAS
     

Share This Page