Log Unlocking ..... Infinity

Discussion in 'Infinity-Box' started by KAHAR MAKASSAR, Jan 3, 2008.

  1. KAHAR MAKASSAR

    KAHAR MAKASSAR Moderator Moderator

    Messages:
    182
    Likes Received:
    20
    Trophy Points:
    0
    unlocking LG KP202
     

    Attached Files:

  2. KAHAR MAKASSAR

    KAHAR MAKASSAR Moderator Moderator

    Messages:
    182
    Likes Received:
    20
    Trophy Points:
    0
    J120i From Orange Unlock ok

    log :
    COM6 [VCP1] selected
    Device: Sony-Ericsson J120i
    "advanced chip detection" active
    Action: read flash
    Checking data, wait...
    Boot...
    Phone should be Switched OFF !
    Press Power button now !
    loading...
    Boot Done
    Check connection...
    Check connection Done
    Set baud...
    Set baud Done
    Check flash...
    flash: 89886200010001:89886200000000
    flash: Intel Intel std [def 003Fx010000 0008x002000] 4Mb
    version sw: 039C-000
    version sw: MLD-5-
    Check flash Done
    Check parameters...
    reading Sony-Ericsson J120i_flash_part_1_of_1...
    file saved: backup_Sony-Ericsson J120i_flash_part_1_of_1_20071229-124018.6AX.bin
    Finished, time used: 566 sec
    Remove/Install battery now !
    COM6 [VCP1] selected
    Device: Sony-Ericsson J120i
    "advanced chip detection" active
    Action: unlock
    Checking data, wait...
    Boot...
    Phone should be Switched OFF !
    Press Power button now !
    loading...
    Boot Done
    Check connection...
    Check connection Done
    Set baud...
    Set baud Done
    Check flash...
    flash: 89886200010001:89886200000000
    flash: Intel Intel std [def 003Fx010000 0008x002000] 4Mb
    version sw: 039C-000
    version sw: MLD-5-
    Check flash Done
    Check parameters...
    reading Sony-Ericsson J120i_eeprom_calibration-1...
    file saved: backup_Sony-Ericsson J120i_eeprom_calibration-1_20071229-131149.6AE.bin
    Check parameters Done
    Check data...
    Check data Done
    Writing...
    .........data prepared Ok
    flash: 89886200010001:89886200000000
    Write: eeprom
    Writing Done
    Finished, time used: 75 sec
    Remove/Install battery now !

    :thumb::thumb::thumb::thumb::thumb:
     
  3. andhybtc2001

    andhybtc2001 New Member

    Messages:
    25
    Likes Received:
    8
    Trophy Points:
    0
    mantap bos..........thanks shering nya
     
  4. KAHAR MAKASSAR

    KAHAR MAKASSAR Moderator Moderator

    Messages:
    182
    Likes Received:
    20
    Trophy Points:
    0
    log unclock....J110i :

    unclock....J110i :

    COM12 [VCP0] selected
    Device: SE-J110i
    "advanced chip detection" active
    Action: unlock
    Checking data, wait...
    Boot...
    Phone should be Switched OFF !
    Press Power button now !
    loading...
    Boot Done
    Check connection...
    Check connection Done
    Set baud...
    Set baud Done
    Check flash...
    flash: 89886200010001:89886200000000
    flash: Intel Intel std [def 003Fx010000 0008x002000] 4Mb
    version sw: 039C-000
    version sw: KIM-5-
    Check flash Done
    Check parameters...
    reading SE-J110i_eeprom_calibration-1...
    file saved: backup_SE-J110i_eeprom_calibration-1_20071011-002839.6AE.bin
    Check parameters Done
    Check data...
    Check data Done
    Writing...
    flash: 89886200010001:89886200000000
    Write: eeprom
    Writing Done
    Finished, time used: 17 sec
    Remove/Install battery now !

    :thumb::thumb::thumb::thumb::thumb:
     
  5. KAHAR MAKASSAR

    KAHAR MAKASSAR Moderator Moderator

    Messages:
    182
    Likes Received:
    20
    Trophy Points:
    0
    Haier Z1000 Unlock

    log Haier Z1000 Unlock :

    COM6 [VCP0] selected
    Checking data, wait...
    Phone should be Switched OFF !
    Connect...
    Press Power button now !
    Connect Ok
    Boot...
    Boot Ok
    Set baud...
    921600
    Set baud Ok
    Read info...
    flash: BF7353FFFF0052:00008500000000
    flash: SST U 4Mb
    Read info Ok
    Check flash...
    Check flash Ok
    Check space...
    reading...
    file saved: backup_eeprom_calibration__20080105-211137.70E.bin
    Check space Ok
    Write...
    flash: BF7353FFFF0052:00008500000000
    Write: eeprom
    Write Ok
    Close...
    Close Ok
    Restart...
    Restart Ok
    Finished, remove/install battery now !

    :thumb::thumb::thumb::thumb::thumb:
     
  6. aduhaii80

    aduhaii80 New Member

    Messages:
    87
    Likes Received:
    18
    Trophy Points:
    0
    kalua ga repot jelasin cara2 nya sekalian bos...
    maklum bos saya baru pegang infinity.

    sebelumnya terima kasaih
     
  7. KAHAR MAKASSAR

    KAHAR MAKASSAR Moderator Moderator

    Messages:
    182
    Likes Received:
    20
    Trophy Points:
    0
    vodafone ztc 125 unlock

    COM3 [VCP0] selected
    Device: ZTC-125
    Checking data, wait...
    Action: reset
    Boot...
    Press Power button now !
    Checking...
    boot answer: 01
    Boot Done
    Set Baud...
    Set Baud Done
    Connecting...
    flash: 0001:22C4
    Connecting Done
    Check free space...
    flash chip supported
    Check free space Done
    Check parameters...
    Check parameters Done
    backup critical area...
    Reading [eeprom-sta]...
    file saved: backup_eeprom-sta_20080118-165639.B1E.bin
    loading data...
    wrong database file: za35_eep65535.cfg
    error: can't load database[11]
    Reading [eeprom-sec]...
    file saved: backup_eeprom-sec_20080118-165640.B1E.bin
    Reading [eeprom-dyn]...
    file saved: backup_eeprom-dyn_20080118-165641.B1E.bin
    backup critical area Done
    Check memory...
    Check memory Done
    Write...
    Write Done
    Finished, Remove/Install battery now !
    Time used: 25 sec

    :thumb::thumb::thumb::thumb::thumb:
     
    Last edited by a moderator: Jan 21, 2008
  8. KAHAR MAKASSAR

    KAHAR MAKASSAR Moderator Moderator

    Messages:
    182
    Likes Received:
    20
    Trophy Points:
    0
    Zte-a39 Unlock

    COM7 [VCP1] selected
    Device: ZTE-A39
    Checking data, wait...
    Action: unlock
    Boot...
    Phone must be POWERED-OFF !
    Press and HOLD Power button !
    Connecting, wait...
    Release Power button !
    flash: EC22E000000000:70E59F00000000
    flash: Samsung KAD060300B T 8Mb
    id: 00005258
    Boot Done
    Set baud...
    115200
    Set baud Done
    Check flash...
    Check flash Done
    Check space...
    file saved: backup__eeprom-calibration_20071109-201727.98E.bin
    file saved: backup__eeprom-ffs_20071109-201814.98E.bin
    Reading[lock-area-2]...
    file saved: backup_lock-area-2_ZTE-A39_20071109-201830.98E.bin
    Check space Done
    Check parameters...
    Check parameters Done
    Erase...
    Erase Done
    Write...
    Write Done
    Finished, time used: 109 sec

    :thumb::thumb::thumb::thumb::thumb:
     
  9. KAHAR MAKASSAR

    KAHAR MAKASSAR Moderator Moderator

    Messages:
    182
    Likes Received:
    20
    Trophy Points:
    0
    Repair IMEI of KE970

    COM4 [VCP0] selected
    Device: LG KE970
    Checking data, wait...
    Action: read eeprom
    Boot...
    Press and HOLD Power button now !
    loading...
    boot answer: 02
    Release Power button now
    Boot Done
    Set Baud...
    460800
    Set Baud Done
    Connecting...
    flash: 0089:887E
    Connecting Done
    Check free space...
    flash chip supported
    Check free space Done
    Check parameters...
    Check parameters Done
    backup critical area...
    reading [eeprom-sta]...
    file saved: C:\Program Files\InfinityBox\Pana01\KE970\backup_eeprom-sta_20080123-203536.B1E.bin
    reading [eeprom-sta2]...
    file saved: C:\Program Files\InfinityBox\Pana01\KE970\backup_eeprom-sta2_20080123-203541.B1E.bin
    loading data...
    data loaded
    imei: 35030526000000100
    reading [eeprom-sec_35030526000000100]...
    file saved: C:\Program Files\InfinityBox\Pana01\KE970\backup_eeprom-sec_35030526000000100_20080123-203543.B1E.bin
    reading [eeprom-complete_35030526000000100]...
    file saved: C:\Program Files\InfinityBox\Pana01\KE970\backup_eeprom-complete_35030526000000100_20080123-203547.B1E.bin
    reading [eeprom-dyn_35030526000000100]...
    file saved: C:\Program Files\InfinityBox\Pana01\KE970\backup_eeprom-dyn_35030526000000100_20080123-203615.B1E.bin
    backup critical area Done
    Check memory...
    completed
    Finished, Remove/Install battery now !
    Time used: 55 sec

    :thumb::thumb::thumb::thumb::thumb:
     
  10. B105

    B105 New Member

    Messages:
    37
    Likes Received:
    26
    Trophy Points:
    0
    j110i O2

    COM4 [VCP1] selected
    Device: Sony-Ericsson J110i
    "advanced chip detection" active
    Action: unlock
    Checking data, wait...
    Boot...
    Phone should be Switched OFF !
    Press Power button now !
    loading...
    Boot Done
    Check connection...
    Check connection Done
    Set baud...
    Set baud Done
    Check flash...
    flash: 89886200010001:89886200000000
    flash: Intel Intel std [def 003Fx010000 0008x002000] 4Mb
    version sw: 039C-000
    version sw: KIM-5-
    Check flash Done
    Check parameters...
    reading Sony-Ericsson J110i_eeprom_calibration-1...
    file saved: backup_Sony-Ericsson J110i_eeprom_calibration-1_20080124-045838.6AE.bin
    Check parameters Done
    Check data...
    Check data Done
    Writing...
    .........data prepared Ok
    flash: 89886200010001:89886200000000
    Write: eeprom
    Writing Done
    Finished, time used: 19 sec
    Remove/Install battery now !

    :D:D:D
     
  11. ojim21

    ojim21 Well-Known Member

    Messages:
    257
    Likes Received:
    538
    Trophy Points:
    103
    wah siabang momod. keren banget neh treed thanks bang :thumb:
     

Share This Page