troble x3 pake cyclone....

Discussion in 'Cyclonebox' started by yudiwira, Oct 16, 2010.

  1. yudiwira

    yudiwira Member

    Messages:
    13
    Likes Received:
    2
    Trophy Points:
    13
    bos2 akang2 tulungan dunk ni x3 hidup hang trus mati lagi....ku coba flashing pake cyclone di info bisa tapi saat mau di flash error cmt boot 2 nya....atau cek sambungan fbus sama errornya ....pake jaff cek ma info gak bisa..mohon pencerahannya akang2..bingung nih...:frusty::frusty::frusty:
     
  2. yudiwira

    yudiwira Member

    Messages:
    13
    Likes Received:
    2
    Trophy Points:
    13
    ni lognya.....kang


    Initializing FBUS...
    All initialized - Ready to work
    MCU Version V 04.11
    MCU Date 09-12-09
    Product RM-540
    Manufacturer (c) Nokia
    IMEI 352008049245662
    Mastercode 31135560
    IMEI Spare 3A25000894426506
    IMEI SV 3325000894426516F1000000
    PPM V 04.11, 09-12-09, RM-540, (c) Nokia , MEC
    CNT Content: meaf_0584183, V 04.11, 09-12-09, RM-540, (c) Nokia ,
    PSN CCK577764
    Product Code 0584183
    Module Code 0204201
    Basic Product Code 0578316
    PSD 0000000000000000
    LPSN 0
    RETU 40
    TAHVO 00
    AHNE 41
    HW 5000
    RFIC 0831
    DSP ICPR91_09w44_RC
    LCD SEIKO
    BT 1673-46034
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102034100
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 24A00011C0630E49FE8872C358185355C4B59620
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D
    CMT_BOOT_ROM_CRC: 67E82268
    CMT_SECURE_ROM_CRC: F29CEA60
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    CBUS Request Error -> CBUS Response wrong header
    Prepare phone failed with message -> Failed to get CMT Configuration
    Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
    Booting CMT...
    Failed to Boot CMT -> CMT Error, not ready to accept Secondary Loader
    Prepare phone failed with message -> Failed to Boot CMT
    Failed to Check BB5 Flashing Bus -> Failed to Boot / Prepare Phone
    Failed to disable VBAT -> CBUS reported an error
    Failed to read info -> Phone not detected
     
    samsoel likes this.
  3. aldy_cell

    aldy_cell New Member

    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    flas x3 bagusnya pake ap
     
  4. black monster

    black monster Moderator Moderator

    Messages:
    1,457
    Likes Received:
    1,797
    Trophy Points:
    123
    Masalah kyk nya cuman di kabel .... Kyk nya
     
    setiawan iwan likes this.
  5. setiawan iwan

    setiawan iwan New Member

    Messages:
    84
    Likes Received:
    15
    Trophy Points:
    0
    Re: c3 phone recstrice



    ini hasil cek bus
    [Nokia C3-00 USB Phonet]: Port opened OK!
    Switching to RAW Mode...
    [Nokia USB Flashing Generic]: Port opened OK!
    New ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
    CMT_EM_ASIC_ID: 00005361
    CMT_PUBLIC_ID: 201DC2FD0ECF24BF1E7E5556BEEF1E87BC35E9D3
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
    CMT_BOOT_ROM_CRC: DE56D582
    CMT_SECURE_ROM_CRC: BDDE7A3A
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.10.34.1, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0010001100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
    BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.10.34.1, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
    APE Boot skipped on user request
    Restarting MCU...
    [Nokia C3-00 USB Phonet]: Port opened OK!
    setelah saya flaash tetep phone restricted bos, trus solusinya gmna bos​
     
  6. anak lampung

    anak lampung New Member

    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    0
    sama seperti punya aku bossss
     

Share This Page