5130 blank nokia

Discussion in 'BB5' started by robi19, Oct 22, 2010.

  1. robi19

    robi19 Member

    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    ni hp datang dgn keadaan blank nokia terus blank putih krteka saya fash timbul kayak gini hasil nya:

    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Library version: 1.0.0.8929(24-06-2010), 1.0.0.14574(24-06-2010)
    Processing file: 9D0565B8_rm495__07.95.mcusw as MCU
    [BB5,BB5 ALGORITHM] size: 18.20 MB
    Supported RAP Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
    RAP Data :
    SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
    EM0 ID: 00000296
    EM1 ID: 00000B22
    PUBLIC ID: 0740021449CB8C562F91EC31D8FEE85B5A026EF5
    ASIC MODE ID: 00
    ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    FlashID0: 00EC 2400 - 0000 8A31 [Samsung ] type: NOR,RAP
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
    Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    RAP PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    TransmissionMode: DDR&TX2
    Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
    Erase skipped.
    Flash programming ...
    Error chk C7012D0103CD000010000000F1
    RX2 not responding, please check BSI/cable/pinout !
    Error while programming [00] at 0x000406C0, Result: 0010
    Flashing terminated with error(s) in 28.578 s

    RX Buffer: C7012D0103CD000010000000F172


    :cry:kira2 gimana y solusi nya
     
  2. robi19

    robi19 Member

    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    Tolong donk kasih solusi nya dan pencerahan nya
     
  3. Setia_One

    Setia_One Jalmi Alit tea Super Moderator

    Messages:
    2,149
    Likes Received:
    11,232
    Trophy Points:
    123
    Pastikan kabel konek dengan baik gan ( bersihkan juga pin2 di pcbnya siapa tahu kotor, atau coba pake ufs hwk,post lagi hasilnya ,thanks
     
  4. rudiprolinx

    rudiprolinx New Member

    Messages:
    32
    Likes Received:
    4
    Trophy Points:
    0
    klo msh bandel erase dulu pake MX tapi jangan lupa backup dulu RPL n PMnya.......,abis tu flash lagi.......!!!!intinya maksimalkan disoftware dulu sebelum kehardware....:thumb::thumb::thumb:
     
  5. sloww56

    sloww56 New Member

    Messages:
    285
    Likes Received:
    582
    Trophy Points:
    0
    dilihat log-nya...
    masalah pada kabel,coba gonta-ganti..
    sering 5130 seprti itu..
     
  6. undun

    undun Member

    Messages:
    67
    Likes Received:
    18
    Trophy Points:
    18
    NAH, ini yg saya suka. 1000% betul tu langkah. Step by step. Jangan LUPA CNT+ PP Backup juga.

    Tembak PM habis Flashing, Full UI default.
     
  7. adityaharisaputra

    adityaharisaputra Moderator Moderator

    Messages:
    793
    Likes Received:
    720
    Trophy Points:
    103
    masalah biasanya terjadi di interfacenya.. ( kabel, pin, rj.dll) cek dulu interfacenya:thumb:
     
  8. bataviacell

    bataviacell Well-Known Member

    Messages:
    69
    Likes Received:
    439
    Trophy Points:
    63
    flash pake mx key pake nokia usb rom aja............dulu pernah gtu akhirnya normal juga....
     
  9. andika damanik

    andika damanik New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    hallo master aku jg pnya kasus 5130 blang nokia lalu mati dah ku lash dan ini hasil nya


    Detected PKEY: 9002DA58
    Card life counter: 16.46%
    P-key nokia module version 01.02
    Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
    JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
    JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\rm-305_4.11\
    JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
    JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
    USB Cable Driver version: Can't read USB Cable Driver version!

    Changing mode...Done!
    Booting phone...
    FAST PHONE detected!

    CMT Boot Data:
    Asic ID: 000000010000022600010006030C192101033000
    Asic Mode ID: 00
    Asic EM ID: 00000B22
    Asic Public ID: 1B60010FDD7349503BF130852CE7ABFCB7AA7C98
    HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
    ROM ID: 273F6D55DFAAF68F
    CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
    Loader version: 01.1E.00 -> Revision: 0000
    Patching CMT boot step1...
    Patching CMT boot step2...
    Patching CMT boot step3...
    CMT Boot Ready
    CMT Flash ID: 240000EC <=> SAMSUNG (SEC) -> Type not in database
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
    Loader version: 01.21.01 -> Revision: 0000
    Patching CMT loader step1...
    Patching CMT loader step3...
    CMT Loader Ready
    Done!
    Restarting phone...Done!
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.mcusw
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.image_x_blu
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.image_x_blu
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.ppm_x
    APE Variant file: NONE
    Backing up CRT data...
    Setting FLASH MODE
    FAST PHONE detected!
    Loader version: 01.1E.00 -> Revision: 0000
    Patching CMT boot step1...
    Patching CMT boot step2...
    Patching CMT boot step3...
    CMT Boot Ready
    CMT Flash ID: 240000EC <=> SAMSUNG (SEC) -> Type not in database
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
    Loader version: 01.21.01 -> Revision: 0000
    Patching CMT loader step1...
    Patching CMT loader step3...
    CMT Loader Ready
    Reading CMT NPC certificate...
    Reading CMT VARIANT certificate...
    VARIANT CRT not available...
    Reading CMT CCC certificate...
    Reading CMT HWC certificate...
    Saved to C:\Program Files\ODEON\JAF\ProgData\35153804297354_CRT_backup_1349261.rpl
    Backup CRT OK!
    Backing up SIMLOCK data...
    Setting local mode...
    Failed! Aborting!
    Failed to backup LCK...
    Manual mode selected, version can't be checked!
    Booting phone...
    Error sync the phone...

    tolong pencerahan nya dong master
     
  10. andika damanik

    andika damanik New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    ni msalah 5130
    Detected PKEY: 9002DA58
    Card life counter: 16.46%
    P-key nokia module version 01.02
    Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
    JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
    JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\rm-305_4.11\
    JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
    JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
    USB Cable Driver version: Can't read USB Cable Driver version!

    Changing mode...Done!
    Booting phone...
    FAST PHONE detected!

    CMT Boot Data:
    Asic ID: 000000010000022600010006030C192101033000
    Asic Mode ID: 00
    Asic EM ID: 00000B22
    Asic Public ID: 1B60010FDD7349503BF130852CE7ABFCB7AA7C98
    HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
    ROM ID: 273F6D55DFAAF68F
    CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
    Loader version: 01.1E.00 -> Revision: 0000
    Patching CMT boot step1...
    Patching CMT boot step2...
    Patching CMT boot step3...
    CMT Boot Ready
    CMT Flash ID: 240000EC <=> SAMSUNG (SEC) -> Type not in database
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
    Loader version: 01.21.01 -> Revision: 0000
    Patching CMT loader step1...
    Patching CMT loader step3...
    CMT Loader Ready
    Done!
    Restarting phone...Done!
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.mcusw
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.image_x_blu
    CNT Flash file: NONE
    APE Variant file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.image_x_blu
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\5130 rm-495 v7.96 bi only By;djar-stones\rm495__07.96.ppm_x
    APE Variant file: NONE
    Backing up CRT data...
    Setting FLASH MODE
    FAST PHONE detected!
    Loader version: 01.1E.00 -> Revision: 0000
    Patching CMT boot step1...
    Patching CMT boot step2...
    Patching CMT boot step3...
    CMT Boot Ready
    CMT Flash ID: 240000EC <=> SAMSUNG (SEC) -> Type not in database
    CMT Flash Data: 00000000000000000000000000000000
    CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
    Loader version: 01.21.01 -> Revision: 0000
    Patching CMT loader step1...
    Patching CMT loader step3...
    CMT Loader Ready
    Reading CMT NPC certificate...
    Reading CMT VARIANT certificate...
    VARIANT CRT not available...
    Reading CMT CCC certificate...
    Reading CMT HWC certificate...
    Saved to C:\Program Files\ODEON\JAF\ProgData\35153804297354_CRT_backup_1349261.rpl
    Backup CRT OK!
    Backing up SIMLOCK data...
    Setting local mode...
    Failed! Aborting!
    Failed to backup LCK...
    Manual mode selected, version can't be checked!
    Booting phone...
    Error sync the phone...

    tolong pencerahan nya master ku
     
  11. aliga nugraha

    aliga nugraha Active Member

    Messages:
    72
    Likes Received:
    112
    Trophy Points:
    43
    coba flash nya pake verssi fimware yg rm495__05.80. boss ..& hati2 .
    backup dulu pm 308.309 .sama rpl imei + simlock nya...

    Resiko tanggung sendiri...
    :D

    smogga sukses..:peace:
     
  12. InOut

    InOut Active Member

    Messages:
    149
    Likes Received:
    43
    Trophy Points:
    38
    Sempet jalan Ga ???
    Coba Re-instal File Flash or dganti ja......
    kmungkinan file flash Corrupt jg bisa ....
    Thx.
     
    ekyadi likes this.
  13. sigitheru

    sigitheru Member

    Messages:
    34
    Likes Received:
    7
    Trophy Points:
    18
    Kasus sama agan2 tadi pagi masuk pasien.....5130 kluar nokia trus blank putih...udah tiga alat micro,mxkey,ama ATF gak tembus juga...ui settingnya failed terus.mau erase taaaaakkuuuuuuut malah gak idup ni hp.
     
  14. alirosidialirosidi

    alirosidialirosidi New Member

    Messages:
    80
    Likes Received:
    9
    Trophy Points:
    0
    :confused::confused::confused::confused::confused::confused:
    kok gak da respon ya gan!punya kasus sama gan :cry::cry::cry::cry::cry::cry::cry:
     
  15. alirosidialirosidi

    alirosidialirosidi New Member

    Messages:
    80
    Likes Received:
    9
    Trophy Points:
    0
    :confused::confused::confused::confused::confused::confused:
    kok gak da respon ya gan!punya kasus sama gan :cry::cry::cry::cry::cry::cry::cry::frusty::frusty::frusty:
     
  16. mo2k

    mo2k New Member

    Messages:
    40
    Likes Received:
    9
    Trophy Points:
    0
    numpang nampang boss.. aku juga punya kasus sama.. pakai jaf, mx key, ufs sama aja gak kedetek waktu info..... gonta ganti kabel juga gak ngaruhh...:cry::cry:
     
  17. depit

    depit Active Member

    Messages:
    154
    Likes Received:
    72
    Trophy Points:
    38
    boz biasa yg saya lakukan untuk hp ini saat pertama datang keadaan nokia kemudian mati untuk menghindari kesalahan flasing kt lakukan format file sistem c dan e nya dan bila bandel full flash dengan kabel usb lebih aman terutama pada jaf silahkan anda coba jika bermanfaat jngn lupa thanksnya
     
  18. rangertiblas

    rangertiblas Member

    Messages:
    59
    Likes Received:
    16
    Trophy Points:
    18
    usahakan HP mo lokai mode dlu.....biasanya flash mcunya aja dlu....set ui seting.....klo g mo flash PPM set ui seting......klo ttp g mo ....hardware gan:thumb::thumb::thumb:
     

Share This Page