test speed usb flashing with BEST infinity

Discussion in 'Infinity-Box' started by outpost, Nov 7, 2010.

  1. outpost

    outpost New Member

    Messages:
    31
    Likes Received:
    9
    Trophy Points:
    0
    usb flashing pake BEST kenceng juga
    ini hasil log speednya
     

    Attached Files:

    Farid Radiansyah likes this.
  2. outpost

    outpost New Member

    Messages:
    31
    Likes Received:
    9
    Trophy Points:
    0
    ini juga hasil laennya

    card found: S/N xxxxx
    registered to: robby



    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected!
    read info... - Ok

    Read and Check phone data...
    ----------------------
    RAP_BOOT: 0803000302010000
    RAP_PUB: 0610020BF7160354FD03E17823EE6343CBEA2F2E
    CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
    RAP_PAPUB: D93826B23E9B093BE4DD7304FBAA6778996AE60B
    ----------------------
    Live Test Ok!
    ----------------------
    CMT Flash ID: 89820089 < INTEL => 0046L0Y1GG
    CNT sector : 128 kb
    ------------------------
    SDD Key status : SD Data is Ok
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Done!

    Reading Phone Info....
    Connected phone - Nokia 5220 XpressMusic
    Software ver : V 04.00 13-06-08 RM-411 (c) Nokia
    IMEI : 353662014616734
    Ape Ver :
    APE Var :
    APE ADSP:
    DSP Ver : ICPR72_08w22_V2
    APE Test:
    PPM : V 04.00 13-06-08 RM-411 (c) Nokia X
    CNT :
    Product SN : DQG295224
    Product code : 0564177
    Base Prd.code: 0554881
    Module code : 0203661
    Long Prod.SN : 0
    Hardware info=======
    HWID : 1000
    Retu : 15
    Tahvo : 22
    Batery: 3753 mV
    Camera:
    CMT BT: 2222-143
    APE BT:
    APE HW:
    LCDVer: SHARP
    RF ic :
    Lock info ===========
    IMEI : 353662014616734
    IMEI spNet : 3A 35 66 02 41 16 76 03
    IMEI svNet : 33 35 66 02 41 16 76 03 F5

    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7

    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created... :)

    User Code : not set
    MMC pwd : no any record found
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

    Done!

    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm411__07.23.mcusw
    PPM : rm411__07.23.ppm_x
    CNT : rm411__07.23.image_x_red
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Backup CRT308 data...
    CRT308 Backup Created... :)
    Batery valtage : 3731 mV
    -> Batery voltage is low, please, charge
    Break by user request

    Phone disconected!

    Connect phone on selected interface...

    Phone found!
    Series 40 Device detected!
    read info... - Ok

    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm411__07.23.mcusw
    PPM : rm411__07.23.ppm_x
    CNT : rm411__07.23.image_x_red
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Backup CRT308 data...
    CRT308 Backup Created... :)
    Getting product info...
    RAP_BOOT: 0803000302010000
    RAP_PUBLIC: 0610020BF7160354FD03E17823EE6343CBEA2F2E
    CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723
    RAP_PAPUBKEY: D93826B23E9B093BE4DD7304FBAA6778996AE60B
    Checking CNT sector PN<>FL
    PN CNT sector : 128 kb
    ConvertImage: Processing rm411__07.23.image_x_red
    ConvertImage: Page Size is 128K, no need convert
    Error on content convert
    Loader len: 307008, CHK: C0CE
    ADL -> Sending loader...
    Update Server code succesfully sent to phone!
    TIME : Boot time : 00:00:04
    Reopening the connection...
    Waiting for response: 30
    Waiting for response: 29
    ADL -> [2nd] changing...
    ADL Server confirm flashmode!
    ADL : Check data
    ADL : Data accepted
    ADL : ASIC CMT select Ok
    ===Flashing [MCU]===
    Erase : Processing rm411__07.23.mcusw
    Found 6 areas to erase
    Erasing area 0x00000000 - 0x000006BF, NOR, CMT
    Result: 0000
    Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:01:48
    Write : Processing rm411__07.23.mcusw
    Total 1289 [1289/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [UPDAPP]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    TIME : Write time : 00:00:59
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing rm411__07.23.ppm_x
    Found 1 areas to erase
    Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:00:45
    Write : Processing rm411__07.23.ppm_x
    Total 498 [498/0/0] blocks to write, writing...
    TIME : Write time : 00:00:23
    PPM Write done
    ===Flashing [CNT]===
    Erase : Processing rm411__07.23.image_x_red
    Found 2 areas to erase
    Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:04:50
    Write : Processing rm411__07.23.image_x_red
    Total 808 [808/0/0] blocks to write, writing...
    TIME : Write time : 00:00:39
    CNT Write done
    ADL : End flashing

    Flashing done!
    Total flash time : 00:09:26
    Reboot phone now...

    Reading Phone Info....
    Connected phone - Nokia 5220 XpressMusic
    Software Info: V 07.23 17-07-09 RM-411 (c) Nokia
    IMEI: 353662014616734
    PPM version : V 07.23 17-07-09 RM-411 (c) Nokia X
    Product code: 0564177
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    FullFactorySet...OK!
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Reset LifeTimer ... Ok
    Checking User Certificates...
    Total - 0 certs
    Uploading certificates...
    Writen 21 certs!
    Set phone to Normal mode...
    AfterFlash operations done...
    Done!

    Elapsed: 00:10:14

    Connect phone on selected interface...
     
    Farid Radiansyah likes this.
  3. outpost

    outpost New Member

    Messages:
    31
    Likes Received:
    9
    Trophy Points:
    0
    card found: S/N xxxxx
    registered to: robby

    Connect phone on selected interface...

    Phone found!
    Series 60 Device detected!
    read info... - Ok


    Read and Check phone data...
    ----------------------
    RAP_BOOT: 0803000002010000
    RAP_PUB: 1130010756D40154C336C705D16D9BF66B868BE0
    CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
    RAP_PAPUB: 0266638E9C2164FC6B5194ED596A6A251C699896
    APE_ROOT: 49A97E826B93BA20B7ED0B082475C005
    ----------------------
    Live Test Ok!
    ----------------------
    CMT Flash ID: 22E800EC < SAMSUNG [SEC] => K5G2829ATC
    APE Flash ID: 1C696A25 < UNKNOW
    ------------------------
    SDD Key status : SD Data is Ok
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Done!

    Reading Phone Info....
    Connected phone - Nokia E65
    Software ver : V 1.0615.25 10-01-07 RM-208 (c) Nokia.
    IMEI : 353263013708760
    Ape Ver : 1.0633.18.01 11-01-07 RM-208 (c)Nokia
    APE Var : 1.0633.18.01_v15 11-01-07 RM-208 (c)Nokia
    APE ADSP: 256
    DSP Ver : A06w14v39
    APE Test:
    PPM :
    CNT :
    Product SN : SUE521891
    Product code : 0542359
    Base Prd.code: 0536849
    Module code :
    Long Prod.SN :
    Hardware info=======
    HWID : 0801
    Retu : 15
    Tahvo : 22
    Batery: 3760 mV
    Camera:
    CMT BT:
    APE BT:
    APE HW: 1
    LCDVer:
    RF ic :
    Lock info ===========
    IMEI : 353263013708760
    IMEI spNet : 3A 35 62 03 31 07 78 06
    IMEI svNet : 33 35 62 03 31 07 78 06 F1

    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7

    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created... :)

    User Code : 12345
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

    Done!


    Elapsed: 00:00:02

    Resetting life Timer...
    Status : Ok!
    Done!

    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm208_m128_h20_ka_prod_406337400_c00_combined.bin
    PPM : rm208_m128_h20_ka_prod_406337400_v15_variant.bin
    CNT : rm208_cp_3.0.fpsx
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Batery valtage : 3760 mV
    -> Batery voltage less, than 3,8V (3760mV). Continue at user risk
    Backup CRT308 data...
    CRT308 Backup Created... :)
    Check communication with phone....
    ADL Boot req
    Communication verify done... Preparing...
    Gathering phone info...
    RAP_BOOT: 0803000002010000
    RAP_PUBLIC: 1130010756D40154C336C705D16D9BF66B868BE0
    CMT_ROOTKEY: BAF3A9C3DBFA8454937DB77F2B8852B1
    RAP_PAPUBKEY: 0266638E9C2164FC6B5194ED596A6A251C699896
    APE_ROOTKEY: 49A97E826B93BA20B7ED0B082475C005
    Check communication with phone...
    CMT Loader len: 46272, CHK: D91D
    Sending CMT boot....
    APE Loader len: 93696, CHK: 2512
    Sending APE boot....
    Boot done
    TIME : Boot time : 00:00:01
    Reboot....
    Reopening the connection...
    Waiting for response: 30
    Waiting for response: 29
    Waiting for response: 28
    Waiting for response: 27
    ADL Server confirm flashmode!
    ADL : Auth skip
    ADL : ASIC CMT select Ok
    ADL : ASIC APE select Ok
    ===Flashing [MCU]===
    Erase : Processing rm208_m128_h20_ka_prod_406337400_c00_combined.bin
    Found 6 areas to erase
    Erasing area 0x001E0000 - 0x00708315, NOR, CMT
    Result: 0000
    Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00080000 - 0x0009FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x000C0000 - 0x000DFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00880000 - 0x0089FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00F00000 - 0x00FDFFFF, NOR, CMT
    Result: 0000
    Found 3 areas to erase
    Erasing area 0x00000000 - 0x0007FFFF, NAND, APE
    Result: 0000
    Erasing area 0x00080000 - 0x000803FF, NAND, APE
    Result: 0000
    Erasing area 0x000C0000 - 0x03CFFFFF, NAND, APE
    Result: 0000
    Partitioning : Ok [4]
    TIME : Erase time : 00:00:39
    Write : Processing rm208_m128_h20_ka_prod_406337400_c00_combined.bin
    Total 1519 [312/1207/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [ADL]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    APE : Writing Hash CERT [KEYS]
    APE : Writing Hash CERT [X-LOADER]
    APE : Writing Hash CERT [PRIMAPP]
    APE : Writing Hash CERT [SOS+LOADER]
    APE : Writing Hash CERT [ADL]
    APE : Writing Hash CERT [SOS+XZIP]
    APE : Writing Hash CERT [PASUBTOC]
    APE : Writing Hash CERT [PAPUBKEYS]
    APE : Writing Hash CERT [SOS*CORE]
    APE : Writing Hash CERT [SOS+ROFS]
    APE : Writing Hash CERT [SOS+ROFX]
    TIME : Write time : 00:03:45
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing rm208_m128_h20_ka_prod_406337400_v15_variant.bin
    Found 1 areas to erase
    Erasing area 0x02860000 - 0x03CFFFFF, NAND, APE
    Result: 0000
    Partitioning : Ok [4]
    TIME : Erase time : 00:00:00
    Write : Processing rm208_m128_h20_ka_prod_406337400_v15_variant.bin
    Total 1603 [0/1603/0] blocks to write, writing...
    APE : Writing Hash CERT [SOS+ROFX]
    TIME : Write time : 00:01:01
    PPM Write done
    ===Flashing [CNT]===
    Erase : Processing rm208_cp_3.0.fpsx
    Erase : No any region, skip erase
    TIME : Erase time : 00:00:00
    Write : Processing rm208_cp_3.0.fpsx
    Total 9 [0/9/0] blocks to write, writing...
    TIME : Write time : 00:00:02
    CNT Write done
    =================
    ADL : End flashing
    ADL : Close CMT session Ok
    ADL : Close APE session Ok

    Flashing done!
    Total flash time : 00:05:29
    Reboot phone now...

    Reading Phone Info....
    Connected phone - Nokia E65
    Software Info: V 4.0615.2 05-06-08 RM-208 (c) Nokia.
    IMEI: 353263013708760
    Ape Version: 4.0633.74.00 04-09-08 RM-208 (c)Nokia
    Product code: 0542359
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    FullFactorySet...OK!
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Set phone to Normal mode...
    AfterFlash operations done...
    Done!

    Elapsed: 00:06:30

    Connect phone on selected interface...
     
    Farid Radiansyah likes this.
  4. outpost

    outpost New Member

    Messages:
    31
    Likes Received:
    9
    Trophy Points:
    0
    card found: S/N xxxxx
    registered to: robby

    Connect phone on selected interface...


    Phone found!
    Series 40 Device detected!
    read info... - Ok

    Read and Check phone data...
    ----------------------
    RAP_BOOT: 0803000302010000
    RAP_PUB: 11500117399E7C56509F6ECCF00558BF9C3E0908
    CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
    RAP_PAPUB: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026
    ----------------------
    Live Test Ok!
    ----------------------
    CMT Flash ID: 89820089 < INTEL => 0046L0Y1GG
    CNT sector : 128 kb
    ------------------------
    SDD Key status : SD Data is Ok
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Done!

    Reading Phone Info....
    Connected phone - Nokia 7210 Supernova
    Software ver : V 04.86 08-08-08 RM-436 (c) Nokia
    IMEI : 351962030350785
    Ape Ver :
    APE Var :
    APE ADSP:
    DSP Ver : ICPR72_08w30
    APE Test:
    PPM : V 04.86 08-08-08 RM-436 (c) Nokia X
    CNT : Content: x V 04.86 08-08-08 RM-436 (c) Nokia
    Product SN : DAO774229
    Product code : 0573104
    Base Prd.code: 0563951
    Module code : 0203868
    Long Prod.SN : 0
    Hardware info=======
    HWID : 1001
    Retu : 15
    Tahvo : 22
    Batery: 3962 mV
    Camera:
    CMT BT: 2222-143
    APE BT:
    APE HW:
    LCDVer: SEIKO
    RF ic :
    Lock info ===========
    IMEI : 351962030350785
    IMEI spNet : 3A 15 69 02 03 53 70 08
    IMEI svNet : 33 15 69 02 03 53 70 18 F3

    Conf key : 0000000000000000
    Provider key : 2440700000000000
    Provider : AT&T;U.S.A. (3650)
    Counters : Key 0 [3] , Fbus 0 [10]
    Blocks : 7

    LOCK STATUS :
    =============================
    BLK : 1
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 2
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 3
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 4
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 5
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 6
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    BLK : 7
    Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
    =============================
    LOCKS : All Open
    =============================
    CRT308 Backup Created... :)

    User Code : 13579
    MMC pwd : Backup saved
    UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

    Done!

    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm436__06.51.mcusw
    PPM : rm436__06.51.ppm_x
    CNT : rm436__06.51.image_x
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Manual mode selected
    Backup CRT308 data...
    CRT308 Backup Created... :)
    -> MMC pass Record found, saving...
    Getting product info...
    RAP_BOOT: 0803000302010000
    RAP_PUBLIC: 11500117399E7C56509F6ECCF00558BF9C3E0908
    CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723
    RAP_PAPUBKEY: F1DCA5EA5203CD30A64D4D95ABCD621F4AB23026
    Checking CNT sector PN<>FL
    PN CNT sector : 128 kb
    ConvertImage: Processing rm436__06.51.image_x
    ConvertImage: Page Size is 128K, no need convert
    Error on content convert
    Loader len: 301952, CHK: BDBD
    ADL -> Sending loader...
    Update Server code succesfully sent to phone!
    TIME : Boot time : 00:00:03
    Reopening the connection...
    Waiting for response: 30
    ADL -> [2nd] changing...
    ADL Server confirm flashmode!
    ADL : Check data
    ADL : Data accepted
    ADL : ASIC CMT select Ok
    ===Flashing [MCU]===
    Erase : Processing rm436__06.51.mcusw
    Found 6 areas to erase
    Erasing area 0x00000000 - 0x000006BF, NOR, CMT
    Result: 0000
    Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
    Result: 0000
    Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x00140000 - 0x0119FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x011A0000 - 0x0133FFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:01:11
    Write : Processing rm436__06.51.mcusw
    Total 1168 [1168/0/0] blocks to write, writing...
    CMT : Writing Hash CERT [NOLO]
    CMT : Writing Hash CERT [KEYS]
    CMT : Writing Hash CERT [PRIMAPP]
    CMT : Writing Hash CERT [PASUBTOC]
    CMT : Writing Hash CERT [PAPUBKEYS]
    CMT : Writing Hash CERT [UPDAPP]
    CMT : Writing Hash CERT [DSP0]
    CMT : Writing Hash CERT [MCUSW]
    TIME : Write time : 00:00:54
    MCU Write done
    ===Flashing [PPM]===
    Erase : Processing rm436__06.51.ppm_x
    Found 1 areas to erase
    Erasing area 0x01340000 - 0x01BDFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:00:30
    Write : Processing rm436__06.51.ppm_x
    Total 492 [492/0/0] blocks to write, writing...
    TIME : Write time : 00:00:23
    PPM Write done
    ===Flashing [CNT]===
    Erase : Processing rm436__06.51.image_x
    Found 2 areas to erase
    Erasing area 0x01BE0000 - 0x01F7FFFF, NOR, CMT
    Result: 0000
    Erasing area 0x01F80000 - 0x03FBFFFF, NOR, CMT
    Result: 0000
    TIME : Erase time : 00:03:58
    Write : Processing rm436__06.51.image_x
    Total 688 [688/0/0] blocks to write, writing...
    TIME : Write time : 00:00:32
    CNT Write done
    ADL : End flashing

    Flashing done!
    Total flash time : 00:07:31
    Reboot phone now...

    Reading Phone Info....
    Connected phone - Nokia 7210 Supernova
    Software Info: V 06.51 23-03-09 RM-436 (c) Nokia
    IMEI: 351962030350785
    PPM version : V 06.51 23-03-09 RM-436 (c) Nokia X
    Product code: 0573104
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    FullFactorySet...OK!
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Reset LifeTimer ... Ok
    Checking User Certificates...
    Total - 0 certs
    Uploading certificates...
    Writen 21 certs!
    Set phone to Normal mode...
    AfterFlash operations done...
    Done!

    Elapsed: 00:08:16

    Connect phone on selected interface...
     
    Farid Radiansyah likes this.
  5. kamuns

    kamuns Active Member

    Messages:
    74
    Likes Received:
    29
    Trophy Points:
    28
    Caranua gimana tuh yn pake usb.. aku nyoba 5220 pake USB kok gk kedetek:frusty::frusty::confused:
     
    Farid Radiansyah likes this.
  6. outpost

    outpost New Member

    Messages:
    31
    Likes Received:
    9
    Trophy Points:
    0
    install nokia pc suite dulu
    supaya nanti detect driver nya waktu hp di on
    usahakan gunakan usb cable bawaan ori handphone
    pake cable bawaan 5130c CA-101d pasti mak nyussss
    TESTED 100% by me:tea:
     
    Farid Radiansyah likes this.
  7. ponselcorner

    ponselcorner Active Member

    Messages:
    194
    Likes Received:
    22
    Trophy Points:
    28
    knpa ya om....punyaku kok tiap kali klik FLASH slalu LOGnya " Bad files detected,will break procedure :( " .padahal sudah saya test di mx key,ufs,mt box..baik2 ajah.apa masih ada yg kurang?

    tolong kasih masukan yah..:pray:
    makasih banyak sebelumnya
     
    Farid Radiansyah likes this.

Share This Page