5130 Error set VPP !

Discussion in 'BB5' started by stroy, Nov 21, 2010.

  1. stroy

    stroy Active Member

    Messages:
    102
    Likes Received:
    46
    Trophy Points:
    38
    tolong gan,5130 di bus chek hsilnya sprti ini...
    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Library version: 1.0.0.9005(07-11-2010), 1.0.0.14948(07-11-2010)
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
    EM0 ID: 00000296
    EM1 ID: 00000B22
    PUBLIC ID: 065001020B038D5634BD2E8755EBC172EAC8DA53
    ASIC MODE ID: 00
    ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    ID 32: 000110040440
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    Error set VPP !
    Error 0000000000:00
    TransmissionMode [DDR&TX2] request failed

    kira2 gmn solusinya
     
  2. sagala63

    sagala63 Moderator Moderator

    Messages:
    978
    Likes Received:
    1,598
    Trophy Points:
    103
    Kl menurut pengalaman, kemungkinan ini masih masalah antara kabel, Tahvo atau IC Flash, solusinya :

    1. Ganti kabelnya = Indikasi terlihat pada errornya teg VPP = kl gak mempan juga.
    2. Goyang Tahvonya...kemungkinan VCC/Vbus nya gak keluar = Indikasi terlihat pd mslh erornya proses reading. Jika gak mempan juga
    3. Kemungkinan R untuk teg VPP dibagian IC Flash dah koit = Indikasi Terlihat pd erros VPP = ganti R nya dl.

    NB:
    Kebiasanya kami selalu menggunakan 3 trik diatas dlm menangani kasus diatas.


    Selamat mencoba
     

Share This Page