Tulungin ya.....Nokia 3120c gagal flash

Discussion in 'BB5' started by esialan, Dec 6, 2010.

  1. esialan

    esialan Member

    Messages:
    57
    Likes Received:
    15
    Trophy Points:
    18
    Sy kmrn coba flash 3120c krn sinyalnya kadang ada kadang tidak trus sering restart klo dipencet2 tombolnya. Ini contoh hasilnya sy pake MX-Key dongle.......
    Coba dibantu ya :pray::pray::pray::pray:

     

    Attached Files:

  2. astrologsitus

    astrologsitus Well-Known Member

    Messages:
    482
    Likes Received:
    745
    Trophy Points:
    103
    wah gambarnya buram tidak klhtan,log tulisanya aja kirim sini?
     
  3. sadermo

    sadermo Super Moderators Super Moderator

    Messages:
    2,086
    Likes Received:
    2,110
    Trophy Points:
    123
    cobak flash fia usb..keknya permasalahan pada gambaar anda karna kabel flash bermasalah(hehe..maklum gambarnya gak kliatan..buram banget);)
     
  4. esialan

    esialan Member

    Messages:
    57
    Likes Received:
    15
    Trophy Points:
    18
    OK ini sblmnya mksh ini lognya Via MX Key.........

    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Library version: 1.0.0.9019(20-11-2010), 1.0.0.15042(20-11-2010)
    Processing MCU file: rm364__09.41.mcusw
    [BB5,BB5 ALGORITHM] size: 20.61 MB
    Supported Ids: 0103192101003000, 010C192101003000, 030C192101023000
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
    EM0 ID: 00000295
    EM1 ID: 00000B22
    PUBLIC ID: 15600214F4137E56C184011324DF7320A245654F
    ASIC MODE ID: 00
    ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    FlashID0: 00EC 220C - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: NOR,CMT
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: B778DFBE4C5F277CE2DE8A38AF46E5D6803E4A79
    TransmissionMode: DDR&TX2
    Erase size: 21.87 MB
    CMT NOR area [00000000-0001FFFF] erased in 0.484 s
    CMT NOR area [00040000-000BFFFF] erased in 1.328 s
    CMT NOR area [000C0000-0013FFFF] erased in 0.234 s
    CMT NOR area [01480000-015FFFFF] erased in 0.453 s
    CMT NOR area [00140000-0147FFFF] erased in 4.532 s
    Flash programming ...
    CMT PAPUBKEYS: B778DFBE4C5F277CE2DE8A38AF46E5D6803E4A79 (RAP Certificate 114 v1) written.
    Error while programming [00] at 0x000A0400, Result: 0000
    Please try to use newer flashloader.
    Flashing terminated with error(s) in 47.156 s

    RX Buffer: B372

    ditunggu ya solusinya.....:cell::cell::cell:
     

    Attached Files:

  5. DYSANTO

    DYSANTO Moderator Moderator

    Messages:
    658
    Likes Received:
    863
    Trophy Points:
    0
    coba sett flash loaderny pke versi 10. klo msh sama, flash pke box lain kyk ufs. Klo err jg kmngkn ic flash bermslh.
     
  6. hanifcellular

    hanifcellular Active Member

    Messages:
    178
    Likes Received:
    20
    Trophy Points:
    28
    berbagi pengalaman aja. saya pernah kaya gitu pake UFS sama gak bisa trus coba pake jaf berhasil tuh.....:thumb::thumb::thumb:
     
    fahri susanto likes this.
  7. Setia_One

    Setia_One Jalmi Alit tea Super Moderator

    Messages:
    2,149
    Likes Received:
    11,232
    Trophy Points:
    123
    Saya pernah ngalamin kyk gitu juga , flash ulang pake ufs hwk bisa tembus ,
    tapi klo bisa backup dulu minimal cert nya via mxkey ,
    klo hp gak mau localmode pake jurus jitu mxkey aja ,
    -centang BB5 sw downgrade fix lalu tekan do selected job , nanti cert nya akan tersimpan otomat ,
    tinggal pindah ke ufs hwk lalu flash ulang , good luck ya , thanks
     
  8. esialan

    esialan Member

    Messages:
    57
    Likes Received:
    15
    Trophy Points:
    18
    OK mksh banget untuk semua solusinya akan sy coba satu2 kebetuhan blm punya Box UFS HWK or JAF nanti hasilnya sy upload lg ya.......:):):)
     
  9. suwanto_hung

    suwanto_hung New Member

    Messages:
    131
    Likes Received:
    33
    Trophy Points:
    0
    hanya saja pake jaf ngak sempurna alias ngak berubah apapun
     
  10. IJUL_PARDES

    IJUL_PARDES New Member

    Messages:
    47
    Likes Received:
    14
    Trophy Points:
    0
    betul...gan...pake jaf emang gk sempurna....:rock::rock::rock::rock:
     
  11. mutakin

    mutakin New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    sy mo n'y jg nieh :confused::confused:
    ,, nokia 3120c gk bs d flash, , pas d cek nampilnya kya gni :

    1ST BOOT : C0,07 [Rm-364] [2.2.0.0]
    CMT ASICID: 000000010000022600010006010C192101003000
    EM 1 ID : 00000295
    EM 2 ID : 00000B22
    CMT PUBID : 0AE00016B0D85550F385BB41E9DF58284CB8AB96
    CMT MODE : 00
    CMT HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT ROMID : 273F6D55DFAAF68F
    CMT 1ST Boot OK
    CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
    CMT FLID0 : 0001003F-00008A21, Amd 72NS512PD
    CMT FLCNT : 00000000000000000000000000000000000000
    CMT MCID0 : FFFF0000-00000000
    CMT 2ND Boot OK
    CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
    00000000: 02 00 00 00 00 D1 72 ......r
    ERR: CMT ALG Boot CERT MISM
    Rebooting Mobile
     
  12. ulya cell

    ulya cell Member

    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    gan sya juga ada masah ni...ggl flash 3120c via mx key hti orange..mohon pencerahannya

    MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C0880F9B
    Using device: HTI, FW ver: 00.50, SN: 01011BF8
    Connection status: EHCI:HUB:HUB:HUB:USB 2.00 (Full-speed)
    Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
    Module ver: 1.0.0.21724(14-05-2013), Library ver: 1.0.0.14397(09-05-2013)
    Processing MCU file: rm364__07.16.mcusw
    [BB5,XSR 1.5] size: 20.59 MB
    Supported Ids: 0103192101003000, 010C192101003000, 030C192101023000
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
    EM0 ID: 00000295
    EM1 ID: 00000B22
    PUBLIC ID: 0130011241E88B56B3E4A3070287F17EF4A40A11
    ASIC MODE ID: 00
    ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    eBB5ProtocolType: OLD
    Storage0: 00EC 220C - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: FLASH,NOR, asic:CMT
    Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
    Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo_xsr15.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x26CB8
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: B778DFBE4C5F277CE2DE8A38AF46E5D6803E4A79
    TransmissionMode: DDR&TX2
    Erase size: 21.87 MB
    CMT FLASH,NOR area [00000000-0001FFFF]
    CMT FLASH,NOR area [00040000-000BFFFF]
    CMT FLASH,NOR area [000C0000-0013FFFF]
    CMT FLASH,NOR area [01480000-015FFFFF]
    CMT FLASH,NOR area [00140000-0147FFFF]
    erased in 4.802 s
    Prog.status for Asic CMT ...
    NAND: Status reported bad blocks.
    Flash programming ...
    Error chk C7012D0103CD
    RX2 not responding, please check BSI/cable/pinout !
    Error while programming [00] at 0x00040300, Result: 0000
    Task failed at (0800001C)!!!
    Last RX buffer: C7 01 2D 01 03 CD 00
     
  13. ulya cell

    ulya cell Member

    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    gan sya juga ada masah ni...ggl flash 3120c via mx key hti orange..mohon pencerahannya

    MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C0880F9B
    Using device: HTI, FW ver: 00.50, SN: 01011BF8
    Connection status: EHCI:HUB:HUB:HUB:USB 2.00 (Full-speed)
    Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
    Module ver: 1.0.0.21724(14-05-2013), Library ver: 1.0.0.14397(09-05-2013)
    Processing MCU file: rm364__07.16.mcusw
    [BB5,XSR 1.5] size: 20.59 MB
    Supported Ids: 0103192101003000, 010C192101003000, 030C192101023000
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
    EM0 ID: 00000295
    EM1 ID: 00000B22
    PUBLIC ID: 0130011241E88B56B3E4A3070287F17EF4A40A11
    ASIC MODE ID: 00
    ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    eBB5ProtocolType: OLD
    Storage0: 00EC 220C - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: FLASH,NOR, asic:CMT
    Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
    Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo_xsr15.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x26CB8
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: B778DFBE4C5F277CE2DE8A38AF46E5D6803E4A79
    TransmissionMode: DDR&TX2
    Erase size: 21.87 MB
    CMT FLASH,NOR area [00000000-0001FFFF]
    CMT FLASH,NOR area [00040000-000BFFFF]
    CMT FLASH,NOR area [000C0000-0013FFFF]
    CMT FLASH,NOR area [01480000-015FFFFF]
    CMT FLASH,NOR area [00140000-0147FFFF]
    erased in 4.802 s
    Prog.status for Asic CMT ...
    NAND: Status reported bad blocks.
    Flash programming ...
    Error chk C7012D0103CD
    RX2 not responding, please check BSI/cable/pinout !
    Error while programming [00] at 0x00040300, Result: 0000
    Task failed at (0800001C)!!!
    Last RX buffer: C7 01 2D 01 03 CD 00
     

Share This Page