help ...5130c conser

Discussion in 'BB5' started by jef_lis, Apr 18, 2011.

  1. jef_lis

    jef_lis New Member

    Messages:
    20
    Likes Received:
    4
    Trophy Points:
    0
    help master....tolong master......hp 5130c conser...di flash sukses,tp msh conser
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 21500111ED9D7D560B84DE1390FE0E2859749E19
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Failed to Create RPL from phone -> No target file chosen
    RPL backup thread finished, continuing...
    Backing up simlock...
    MCU Version V 07.97
    MCU Date 13-09-10
    Product RM-495 (Nokia 5130 XpressMusic)
    Manufacturer (c) Nokia
    IMEI 355212034418758
    Mastercode 442044776
    Simlock backup OK, saved to RM-495_355212034418758_4182011_30307 PM.SLBackup.PM
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm495__07.97.mcusw (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 21500111ED9D7D560B84DE1390FE0E2859749E19
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    rm495__07.97.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
    EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
    EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
    EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
    EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
    EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 80.657s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT NOLO Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT DSP0 Certificate...
    Writing CMT MCUSW Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 53.187s
    Flashing Speed: 2870.00 kBit/S
    Restarting MCU...
    Processing rm495__07.97.mcusw (APE)...
    Processing rm495__07.97.ppm_x (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 21500111ED9D7D560B84DE1390FE0E2859749E19
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    rm495__07.97.ppm_x, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 34.156s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 20.609s
    Flashing Speed: 3140.51 kBit/S
    Restarting MCU...
    Processing rm495__07.97.ppm_x (APE)...
    Processing rm495__07.97.image_x_red (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 21500111ED9D7D560B84DE1390FE0E2859749E19
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    rm495__07.97.image_x_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
    EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 190.328s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 34.0s
    Flashing Speed: 3180.30 kBit/S
    Restarting MCU...
    Processing rm495__07.97.image_x_red (APE)...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    MCU Version V 07.97
    MCU Date 13-09-10
    Product RM-495 (Nokia 5130 XpressMusic)
    Manufacturer (c) Nokia
    IMEI 355212034418758
    Mastercode 442044776
    IMEI Spare 3A55120243147805
    IMEI SV 3355120243147855F8000000
    PPM V 07.97, 13-09-10, RM-495, (c) Nokia , X
    CNT Content: x_red, V 07.97, 13-09-10, RM-495, (c) Nokia
    PSN HGA173789
    Product Code 0578115
    Module Code 0204024
    Basic Product Code 0567772
    PSD 0000000000000000
    LPSN 0
    RETU 16
    TAHVO 22
    AHNE 30
    Hardware 1000
    RFIC 06540601
    DSP ICPR72_10w01
    LCD SEIKO
    BT 2222-302
    Failed to read info -> Failed to read SP info
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!
     
  2. .: PUSING TEAM 182 :.

    .: PUSING TEAM 182 :. MADE IN DJAWIR Super Member

    Messages:
    509
    Likes Received:
    791
    Trophy Points:
    103
  3. dutagsm

    dutagsm Moderator Moderator

    Messages:
    1,544
    Likes Received:
    3,065
    Trophy Points:
    123
    permasalahan Contact Service dikarena gagalnya hp saat melakukan selftest, seringnya penyebab gagalnya selftest karena area PM dan Security area yg korup, terakhir adalah maslah di hardware pada EM dan Cpu(agak jarang)....
    untuk mengetahuinya perlu kita lakukan selftest menggunakan box flasher....

    kirimkan log selftestnya kesini bos, biar bs dianalisa....
     

Share This Page