Tutorial flash hp cina dengan z3x box

Discussion in 'Chinese Phone' started by ashakaas, May 1, 2011.

  1. ashakaas

    ashakaas Well-Known Member

    Messages:
    344
    Likes Received:
    345
    Trophy Points:
    73
    Hal yg di siapkan solder , kabel rj45 8pin
    1.potong rj 45
    2 solder pin1 untuk vbat
    3 solder pin 2 untuk rx
    4 solder pin 3 untuk tx
    5 solder pin 8 untuk gnd
    6 box z3x tentunya
    7 buka mtk tool z3x
    8 propile generic mtk
    9 READ WRITE FORMAT DLL TEKAN ON/OFF , KLO INI PASTI SUDAH PAHAM SEMUA
    10 terserah anda mau apa aja z3x goyang ngebor
    11 siapkan nota tulis terserah anda.
    INI LOG NYA MITO 303
    Gemalto Card Tests Ok!
    Selected model is:Generic MT62XX NOR:AUTO
    Press Connect to detect memory config...
    Updating Flash Configuration...
    Welcome to MTKModule v1.9.0.0 Card S/N:XXXXXXXXCard ver.2.2
    BROM.DLL Version :BROM_DLL_v3.1012.00 From 2010/06/05 03:44:46
    META.DLL Version :META_DLL_v5.808.00 From 2008/02/22 13:33:14
    Detecting Loaders ...
    Download Agents Found :7
    Ready.
    Selected model is:Generic MT62XX NOR:AUTO
    Press Connect to detect memory config...
    Starting flasher module.... [BOOT_MODE]
    Boot filename: C:\Program Files\Z3X\MTK\MTK_AllInOne_DA_1012.bin
    Reconnect battery and press power button now!
    Getting MCUID...
    Booting... You can release power key now!
    Project Name: MT6223_S00
    [!] Failed to detect RAM (Possible HW failure)
    NOR Detected : (128Mb+0Kb) [ST] M30L0T7000T0, M36L0T7050T0
    NAND Detected : N/A
    Advanced detection information:
    BBCHIP: "MT6223_S00", EXT_26M
    CODE(0x6223), VER(0x8A05), SW(0x8A00)
    NOR_ID: "[ST] M30L0T7000T0, M36L0T7050T0"
    NOR_ID: 0x0020, 0x88C4, 0x0000, 0x0000
    NAND_ID: "NAND_UNKNOWN"
    NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
    Detection Done!
    Reading NOR : "C:\Program Files\Z3X\MTK\MTKBOOT.TMP", 0x00000000:0x00080000
    Operation Done!
    Setting NOR buffer size :1000000
    PostProcessing Boot File
    ROMINFO V4 Structure found!
    Ver.:TECHAIN23_08A_F_PCB01_GPRS_MT6223_S00.Q106_S10_1_AW_F3_101009.BIN
    Platform:Q106_S10.1_AW_F3_101009
    Filesystem:00E00000:00200000
    This device have no SEC block (Safe for READ/WRITE)
    Done!
    Starting flasher module.... [READ_MODE]
    Reconnect battery and press power button now!
    Getting MCUID...
    Booting... You can release power key now!
    Project Name: MT6223_S00
    [!] Failed to detect RAM (Possible HW failure)
    NOR Detected : (128Mb+0Kb) [ST] M30L0T7000T0, M36L0T7050T0
    NAND Detected : N/A
    Advanced detection information:
    BBCHIP: "MT6223_S00", EXT_26M
    CODE(0x6223), VER(0x8A05), SW(0x8A00)
    NOR_ID: "[ST] M30L0T7000T0, M36L0T7050T0"
    NOR_ID: 0x0020, 0x88C4, 0x0000, 0x0000
    NAND_ID: "NAND_UNKNOWN"
    NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
    Detection Done!
    Reading NOR : "C:\Documents and Settings\Admin\Desktop\TECHAIN23_08A_F_PCB01_GPRS_MT6223_S00.Q106_S10_1_AW_F3_101009.BIN", 0x00000000:0x01000000
    Operation Done!
    Processing flash file
    Processing ROM File
    ROMINFO V4 Structure found!
    Ver.:TECHAIN23_08A_F_PCB01_GPRS_MT6223_S00.Q106_S10_1_AW_F3_101009.BIN
    Platform:Q106_S10.1_AW_F3_101009
    Filesystem:00E00000:00200000
    Security:00000000:00000000
    Preparing SCAT
    All blocks are ready for flashing!
    Region #0 'ROM' adress:0x00000000
    Updating Flash Configuration...
    Done!
    Selected model is:Generic MT62XX NOR:AUTO
    Press Connect to detect memory config...
    Starting flasher module.... [WRITE_MODE]
    Formatting after download DISABLED
    Reconnect battery and press power button now!
    Getting MCUID...
    Booting... You can release power key now!
    Project Custom Name: TECHAIN23_08A_F
    Project ID: Q106_S10.1_AW_F3_101009
    Project Name: MT6223_S00
    RAM Detected : 32Mb SRAM
    NOR Detected : (128Mb+32Mb) [ST] M30L0T7000T0, M36L0T7050T0
    NAND Detected : N/A
    Advanced detection information:
    BBCHIP: "MT6223_S00", EXT_26M
    CODE(0x6223), VER(0x8A05), SW(0x8A00)
    NOR_ID: "[ST] M30L0T7000T0, M36L0T7050T0"
    NOR_ID: 0x0020, 0x88C4, 0x0000, 0x0000
    NAND_ID: "NAND_UNKNOWN"
    NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
    Detection Done!
    Writing Flash...
    Operation Done!
     
  2. ashakaas

    ashakaas Well-Known Member

    Messages:
    344
    Likes Received:
    345
    Trophy Points:
    73
    mantappppppppppppppppppppppppppp
     
  3. ashakaas

    ashakaas Well-Known Member

    Messages:
    344
    Likes Received:
    345
    Trophy Points:
    73
    ini gamgar untuk cabel nya
     

    Attached Files:

    karsitoe likes this.

Share This Page