[help] 6120c fw downgrdae gagal booting

Discussion in 'BB5' started by 7levin, May 9, 2011.

  1. 7levin

    7levin New Member

    Messages:
    41
    Likes Received:
    1
    Trophy Points:
    0
    gan nokia 6120c ane tadinya pake firmware 7.2 nah gara2 gak ada bhs indonesianya ane coba downgrade ke v7.1 yg bi, masalahnya setelah downgrade ponsel ane pas dinyalain cuma sampe tampilan hitam terus mati lagi,.. sayang log awl pas downgrade gak sempet di simpan tp ni ane kaog dari jaf waktu coba di flash pake fw v7.1


    JAF version 1.98.62
    Detected PKEY: 9000A016
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.36.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\

    Searching for default location of ini...
    Checking path: \Products\RM-243\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-243\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_core.fpsx
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_vB14_03_apac1.fpsx
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_UDA_Classic_Blue.fpsx
    APE Variant file: NONE
    Backing up CRT...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Reading IMEI...
    Failed! Aborting!
    Failed to backup CRT...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Error reading phone init data...
    Changing mode...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Done!
    Backing up CRT...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Reading IMEI...
    Failed! Aborting!
    Failed to backup CRT...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Error reading phone init data...
    Searching for phone...Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Found
    Error reading full info...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Found
    Init usb flashing...
    Error init usb flashing...
    Changing mode...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Done!
    Backing up CRT...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Reading IMEI...
    Failed! Aborting!
    Failed to backup CRT...
    Preparing for downgrade...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    Failed to prepare for downgrade...
    Detected P-KEY: 9000A016
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 006.044.048
    Elf2flash 09.14.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting....................Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 0600
    Selecting CMT flash...Result: 0000
    Phone is in flash mode...
    CMT blocks: 604, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_core.fpsx...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 0087FFFF ... Erase result: 0000
    Erasing cmt zone 00B80000 - 04DFFFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_vB14_03_apac1.fpsx...
    Erasing cmt zone 03300000 - 04DFFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_UDA_Classic_Blue.fpsx...
    Erasing cmt zone 04E00000 - 07B3FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_core.fpsx...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS*CORE
    Sending CMT HASH for SOS+ROFS
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_vB14_03_apac1.fpsx...
    Sending CMT HASH for SOS+ROFX
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_UDA_Classic_Blue.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: (null)
    APESW: (null)
    VariantSW: (null)
    Prodcode:
    Done!

    ane pernah coba flash pake firmware 7.1 bi blue (log diatas pake fw 7.1 bi red) tp malah gak bisa di flash sama sekali katanya
    'can't found flashing server'

    mohon bantuan bwt agan2 semuanya
    thx sebelumnya
     
  2. bowo3

    bowo3 Well-Known Member

    Messages:
    125
    Likes Received:
    203
    Trophy Points:
    53
    waktu downgrade biasanya flasher tool otomatis back-up rpl, npc serta file2 penting lain yg diperlukan utk di restore kembali ketika proses flash file downgrade. Jd file2 penting tsb harus anda temukan untuk proses restore.
     
    rejeki likes this.
  3. boelda

    boelda Moderator Moderator

    Messages:
    942
    Likes Received:
    566
    Trophy Points:
    103
    Cari Firmware di atasnya atau paling tidak v 7.20 ( sama sebelum di downgrade )
    kemudian flash. jangan sekali- kali melakukan full erase, karena karena CRT belum ter-backup.
    kalo masih blank coba baca2 di sini http://forum.djawir.com/bb5-43/6120c-startup-failed-solution-62353/
     
  4. racingzzz

    racingzzz Moderator Moderator

    Messages:
    688
    Likes Received:
    2,347
    Trophy Points:
    103
    wah...harus nya ngk perlu downgrade kalo cmn pengen BI.
    cukup flash area PPM dengan firmware yg BI.

    tapi sudah terlanjur,yaudah ikuti saran master" di atas dulu ya bro...
     
  5. 7levin

    7levin New Member

    Messages:
    41
    Likes Received:
    1
    Trophy Points:
    0
    Mohon penjelasanya gan maklum ane masih newbie kalau pernah di post disini tutuorialnya,
    minta linknya donk
    makasih sebelumnya
     
  6. racingzzz

    racingzzz Moderator Moderator

    Messages:
    688
    Likes Received:
    2,347
    Trophy Points:
    103
    kalau cmn ingin merubah jadi BI ngk perlu fullflash apalagi downgrade.
    cukup dengan merubah file bagian bahasa saja istilah nya PPM nya saja.
    beda versi juga ngk masalah kok.
     
  7. yuki73

    yuki73 Well-Known Member

    Messages:
    336
    Likes Received:
    224
    Trophy Points:
    53
    Betul saran Master2 di atas boz,,,sayang skali downgrade klo cm ambil BI,,,
    berarti hrus flash ulang dgn versi yg pertama atau yg di atasnya,,>>>Biasakan backup rpl n pm>>,,Coba pake mxkey boz,,lebih simple n praktis,,:rock::rock::rock:
     
  8. taucho2000

    taucho2000 New Member

    Messages:
    27
    Likes Received:
    71
    Trophy Points:
    0
    pakai mxkey service--quick pix--bb5 sw downgrade fix beres dah
     
  9. 7levin

    7levin New Member

    Messages:
    41
    Likes Received:
    1
    Trophy Points:
    0
    makasih para master,hape ane udah bs jalan lg dng cara flash pake firmware 6120c,tp blum BI cz gak ngerti gmana cara flash ppm bi k firmware 7.2 yg ane pake,ane coba flash pake jaf trus di unceck MCU,lalu JAF minta file ppm ane ksh file .fpsx yg ane rasa itu file ppmx tp kagak bs di flash-in ket 'couldn't find flash server'gmana ni solusinya?
     

Share This Page