5200 logo nokia langsung putih

Discussion in 'BB5' started by taucho2000, May 10, 2011.

  1. taucho2000

    taucho2000 New Member

    Messages:
    27
    Likes Received:
    71
    Trophy Points:
    0
    awal hp kena air, dah di bersihiin pakai tinner langsung hidup cuma keluar logo nokia langsung putih, dah dicheck, diinfo, diflash normal. cuma masih bandel nokia langsung putih, dah ganti ic retu, flexi, lcd bagus tetap ja melongo putih :cry::cry::cry:,....mohon solusi dan pencerahannya...
     
  2. racingzzz

    racingzzz Moderator Moderator

    Messages:
    688
    Likes Received:
    2,347
    Trophy Points:
    103
    setelah di bersihkan sudah di cek blm short / tidak nya?
    apakah bisa melakukan / menerima panggilan?

    coba cek komponen berikut!



    [​IMG]
     
    harec el huda and dsbc like this.
  3. taucho2000

    taucho2000 New Member

    Messages:
    27
    Likes Received:
    71
    Trophy Points:
    0
    gak ada short, menerima panggilan tidak bisa, on keluar logo nokia langsung putih 1 menit mati. dah dicoba solder ulang board connectornya masih tetap boz....
     
  4. berkat cell

    berkat cell Moderator Moderator

    Messages:
    3,760
    Likes Received:
    17,120
    Trophy Points:
    123
    nokia 5200 lcd blank putih ...tidak bisa buat call...!!!

    jika ponsel sungguh udah kering...coba software ponsel nya..?? up log nya..

    ga bisa call in-out...periksa pemasangan kabel flexible dan bersihkan konektor lcd dr jamur bekas air..??
    cek teg Vio=1.8 v dan Vaux = 2.5 v....??
    lihat panduan pada gambar di bawah..!!!
    [​IMG]


    [​IMG]
     
  5. dsbc

    dsbc New Member

    Messages:
    53
    Likes Received:
    56
    Trophy Points:
    0
    thaks gan :thumb:
     
  6. my_fathercell

    my_fathercell New Member

    Messages:
    3
    Likes Received:
    2
    Trophy Points:
    0
    thx gan,,,,,,,,tokcer enggk ea,,,
     
  7. bluebatt

    bluebatt New Member

    Messages:
    56
    Likes Received:
    21
    Trophy Points:
    0
    punya kasus sama awal dateng nokia nyala ga lama kemudian gambar lebur langsung putih setelah di flash nyalain nokia langsung mati ini kok gambarnya mana ya kalo mau liat log ya ini

    MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN:
    Using device: USB ROM and HTI, FW ver: 00.50, SN:
    Connection status: UHCI:HUB::USB 2.00 (Full-speed)
    Driver: NMWCD, ver: 7.1.32.70
    Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
    Processing MCU file: rm174__07.20.mcusw
    [BB5,BB5 ALGORITHM] size: 14.55 MB
    Supported Ids: 0103192101001101, 010C192101001101
    Make sure USB cable, Battery and charger are removed from device.
    Insert USB cable, Battery back to device(make sure to have fully charged battery).
    Insert Charger or Press phone's power button(if flashing doesnt start automatically)
    Waiting for USB ROM device ...
    CMT SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
    CMT EM0 ID: 00000232
    CMT EM1 ID: 00000353
    CMT PUBLIC ID: 19C001026C1670569E575A717713B9B49C23C3AD
    CMT ASIC MODE ID: 00
    CMT ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT ROM ID: 191EC665DFAAF68F
    Flashing CMT Update Server Data, ULO: 0x3880 bytes
    Update Server code succesfully sent to phone.
    Flashing CMT Update Server Data, UPDAPP: 0x3DFC0 bytes
    Update Server code succesfully sent to phone.
    Flashing CMT Update Server Data, PASUBTOC: 0x4BF80 bytes
    Update Server code succesfully sent to phone.
    Waiting for USB device removal ...
    Device connected: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: 194125F2
    Verifying communication to device OK.
    Erase size: 16.37 MB
    CMT FLASH,NOR area [00000000-000006BF] erased in 0.375 s
    CMT FLASH,NOR area [000006C0-0001FFFF] erased in 0.360 s
    CMT FLASH,NOR area [00020000-0007FFFF] erased in 1.125 s
    CMT FLASH,NOR area [00080000-000DFFFF] erased in 1.140 s
    CMT FLASH,NOR area [00100000-001FFFFF] erased in 3.079 s
    CMT FLASH,NOR area [00200000-0031FFFF] erased in 3.343 s
    CMT FLASH,NOR area [00320000-0105FFFF] erased in 39.703 s
    CMT FLASH,NOR area [01060000-01067FFF] erased in 0.375 s
    CMT FLASH,NOR area [01068000-0107FFFF] erased in 0.375 s
    Flash programming ...
    CMT NOLO block sent
    CMT KEYS block sent
    CMT PRIMAPP block sent
    CMT PASUBTOC block sent
    Selecting first CMT PAPUB block with matching RootKey.
    CMT PAPUBKEYS: D6D07E58 [Rap Certificate 31 v1] sent
    CMT UPDAPP block sent
    CMT DSP0 block sent
    CMT MCUSW block sent
    CMT PMM_CONF block sent
    CMT SBIF_CONF block sent
    Programming completed in 1 min 43.859 s
    Processing PPM file: rm174__07.20.ppm_x
    [BB5,BB5 ALGORITHM] size: 4.27 MB
    Supported Ids: 0103192101001101, 010C192101001101
    Erase size: 4.50 MB
    CMT FLASH,NOR area [01080000-014FFFFF] erased in 13.500 s
    Flash programming ...
    Programming completed in 31.360 s
    Processing CNT file: rm174__07.20.image_x
    [BB5,BB5 ALGORITHM] page size: 64 K size: 6.63 MB
    Supported Ids: 0103192101001101, 010C192101001101
    Erase size: 10.87 MB
    CMT FLASH,NOR area [01500000-01FDFFFF] erased in 32.296 s
    Flash programming ...
    Programming completed in 45.344 s
    Total time for flashing process(boot+erase+write) was 5 min 15.156 s
    Waiting for USB device removal ...OK
    Waiting for USB device arrival ...OK
    Waiting for device boot up ...
    Device connected: nmwcdc\Nokia 5200 USB Phonet, PORT_ID: 15F65F6C
    Verifying communication to device OK.


    Phone type: RM-174 (Nokia 5200)
    SW version: V 07.20 23-10-08 RM-174 (c) Nokia.
    Imei plain: 35309602480562-5
    Product code: 0535511
    Battery voltage: 3811 mV, current: 96 mA
    Language Pack:
    - not available.

    SLPA ver[1]: PA_SL (15 digit NCK)

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed


    Imei net: 353096024805625
    Version: SIMLOCK SERVER VERSION 63
    Counter: 0/3, 0/10

    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
     
  8. bluebatt

    bluebatt New Member

    Messages:
    56
    Likes Received:
    21
    Trophy Points:
    0
    punya kasus sama awal dateng nokia nyala ga lama kemudian gambar lebur langsung putih setelah di flash nyalain nokia langsung mati ini kok gambarnya mana ya kalo mau liat log ya ini

    MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN:
    Using device: USB ROM and HTI, FW ver: 00.50, SN:
    Connection status: UHCI:HUB::USB 2.00 (Full-speed)
    Driver: NMWCD, ver: 7.1.32.70
    Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
    Processing MCU file: rm174__07.20.mcusw
    [BB5,BB5 ALGORITHM] size: 14.55 MB
    Supported Ids: 0103192101001101, 010C192101001101
    Make sure USB cable, Battery and charger are removed from device.
    Insert USB cable, Battery back to device(make sure to have fully charged battery).
    Insert Charger or Press phone's power button(if flashing doesnt start automatically)
    Waiting for USB ROM device ...
    CMT SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
    CMT EM0 ID: 00000232
    CMT EM1 ID: 00000353
    CMT PUBLIC ID: 19C001026C1670569E575A717713B9B49C23C3AD
    CMT ASIC MODE ID: 00
    CMT ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT ROM ID: 191EC665DFAAF68F
    Flashing CMT Update Server Data, ULO: 0x3880 bytes
    Update Server code succesfully sent to phone.
    Flashing CMT Update Server Data, UPDAPP: 0x3DFC0 bytes
    Update Server code succesfully sent to phone.
    Flashing CMT Update Server Data, PASUBTOC: 0x4BF80 bytes
    Update Server code succesfully sent to phone.
    Waiting for USB device removal ...
    Device connected: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: 194125F2
    Verifying communication to device OK.
    Erase size: 16.37 MB
    CMT FLASH,NOR area [00000000-000006BF] erased in 0.375 s
    CMT FLASH,NOR area [000006C0-0001FFFF] erased in 0.360 s
    CMT FLASH,NOR area [00020000-0007FFFF] erased in 1.125 s
    CMT FLASH,NOR area [00080000-000DFFFF] erased in 1.140 s
    CMT FLASH,NOR area [00100000-001FFFFF] erased in 3.079 s
    CMT FLASH,NOR area [00200000-0031FFFF] erased in 3.343 s
    CMT FLASH,NOR area [00320000-0105FFFF] erased in 39.703 s
    CMT FLASH,NOR area [01060000-01067FFF] erased in 0.375 s
    CMT FLASH,NOR area [01068000-0107FFFF] erased in 0.375 s
    Flash programming ...
    CMT NOLO block sent
    CMT KEYS block sent
    CMT PRIMAPP block sent
    CMT PASUBTOC block sent
    Selecting first CMT PAPUB block with matching RootKey.
    CMT PAPUBKEYS: D6D07E58 [Rap Certificate 31 v1] sent
    CMT UPDAPP block sent
    CMT DSP0 block sent
    CMT MCUSW block sent
    CMT PMM_CONF block sent
    CMT SBIF_CONF block sent
    Programming completed in 1 min 43.859 s
    Processing PPM file: rm174__07.20.ppm_x
    [BB5,BB5 ALGORITHM] size: 4.27 MB
    Supported Ids: 0103192101001101, 010C192101001101
    Erase size: 4.50 MB
    CMT FLASH,NOR area [01080000-014FFFFF] erased in 13.500 s
    Flash programming ...
    Programming completed in 31.360 s
    Processing CNT file: rm174__07.20.image_x
    [BB5,BB5 ALGORITHM] page size: 64 K size: 6.63 MB
    Supported Ids: 0103192101001101, 010C192101001101
    Erase size: 10.87 MB
    CMT FLASH,NOR area [01500000-01FDFFFF] erased in 32.296 s
    Flash programming ...
    Programming completed in 45.344 s
    Total time for flashing process(boot+erase+write) was 5 min 15.156 s
    Waiting for USB device removal ...OK
    Waiting for USB device arrival ...OK
    Waiting for device boot up ...
    Device connected: nmwcdc\Nokia 5200 USB Phonet, PORT_ID: 15F65F6C
    Verifying communication to device OK.


    Phone type: RM-174 (Nokia 5200)
    Software version: V 07.20 23-10-08 RM-174 (c) Nokia.
    Imei plain: 35309602480562-5
    Product code: 0535511
    Battery voltage: 3811 mV, current: 96 mA
    Language Pack:
    - not available.

    SLPA ver[1]: PA_SL (15 digit NCK)

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed


    Imei net: 353096024805625
    Version: SIMLOCK SERVER VERSION 63
    Counter: 0/3, 0/10

    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
     

Share This Page