2600c buka camera langsung restart

Discussion in 'DCT-4' started by freelance, May 13, 2011.

  1. freelance

    freelance Well-Known Member Super Member

    Messages:
    1,019
    Likes Received:
    2,155
    Trophy Points:
    123
    log bus chek

    MXKEY Serial: [MxKey HTI FLASHER INTERFACE 3] xxxxxxx
    Using device: HTI BOX, FW ver: 00.07
    Driver: HTIBUS, ver: 3.4.7.0, NTMP ver: 2.6.0.0
    Module ver: 1.0.0.16662(04-05-2011), Library ver: 1.0.0.9921(04-05-2011)
    ASIC ID: 0x3162 [UPP_8M ver: 6.2]
    SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
    Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
    FlashID0: 00EC 2208 [Samsung K8F5615ETM,256 Mbits] page size: 128 K type: NOR area: 01000000-02FFFFFF
    FlashID1: 0000 0001 [unused/removed]
    ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000
    Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
    Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
    Performing Flash Authentication ...OK
    UEM ID: 00515042:DA3BDA66
    ASIC type: 11
    UEM Imei: 35194603731362
    Flash Imei: 35194603739362
    MasterCode: 3555561340
    Invalid imei checksum !

    Phone Type: RM-340 (Nokia 2600c-2)
    SW Version: V 06.82 26-09-08 RM-340 (c) Nokia
    Imei plain: 35194603739362-5
    Imei OTP: 35194603739362
    Product Code: 0576464
    Cellular System: GSM
    ASIC ID: 0x3162, type: 11
    Ppm Id: X
    Language Pack:
    - not available.

    "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-340" folder created.
    Imei net: 35194603739362
    Version: SIMLOCK SERVER
    Provider: GSM Test Operator
    Counter: 0/3, 0/10

    CONFIG_DATA: 0010100000000000
    PROFILE_BITS: 800000000001000B

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
     
  2. feick

    feick Well-Known Member Super Member

    Messages:
    1,666
    Likes Received:
    622
    Trophy Points:
    123
    Biasanya kl0 dibuschex via Mxkey mmg ky gt pak b0z,. C0ba di selftest via UFS gmn hsl nya ??

    Sbenarnya dr 2600c at0 2630c penyakit camera restart kadang cuma dr cameranya sendiri yg rusak.. At0 jalur pin tempat camera kurang pas..

    Coba aja bersih2in dulu,
    Kl0 mmg hsl nya sama c0ba ukur2 jalur na bs jd tegangan camera kurang..

    Disimak aja Nih gambar dibwh ini ,.
    Mdh2an membantu.. :peace:

    [​IMG]

    [​IMG]

    [​IMG]

    Thanks..:pound:
     
    alfaud and racingzzz like this.
  3. ndeso cell

    ndeso cell New Member

    Messages:
    354
    Likes Received:
    92
    Trophy Points:
    0
    coba dicek dcc camera gan..make mxkey..
     
  4. sob4t

    sob4t Active Member

    Messages:
    234
    Likes Received:
    42
    Trophy Points:
    38
    yg sudah tes siapa ya??? aku pake mx-key di ganti2 file DCC hasil tetap restart terus
     

Share This Page