3660 error

Discussion in 'WD2 & APE' started by Indra Indiragandi, May 21, 2011.

  1. Indra Indiragandi

    Indra Indiragandi New Member

    Messages:
    31
    Likes Received:
    3
    Trophy Points:
    0
    PARA MASTER FORUM Djawir Tolong Aku Gan ..Aku dapat Pasien
    NOkia 3660 Awal mulanya Hp Matot dan ga ada switch on offnya
    trus di CHEK pake UFS terdeteksi..dah gitu Aku Flash tapi hp mlah error




    Berikut laporan log nya pake UFS



    1st Boot Ok, WD2, UPP: 1081
    Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
    Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
    Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
    Algorithm: w3_amd.fia, w3_cbusb.fia, Ver: 4.55.0
    Algorithm Ok, MSID: 8494F78186E613318C162F1B1A
    Decoded MSID: 3E4EBAF7-001AB07E-A8000000
    Encoded FAID: 2E7460B4-26506F7D-ADF68F79
    Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
    Area2: 0x00010000-0x006FFFFF Erased, Time: 01:12
    Area3: 0x02000000-0x023FFFFF Erased, Time: 00:41
    Area4: 0x04000000-0x046CFFFF Erased, Time: 01:08
    BT MCM (21) Image Found: 0x0002DD00
    BT MCM Registering Done
    MCU Flashing Completed, Time: 03:41
    Erasing: 0x00000000-0x0000FFFF ...
    Erasing Error: 10, at: 0x00000000-0x0000FFFF, 940108, Time: 00:00
    Process Failed, Repowering Mobile


    dan ini log yang menggunakan J.A.F. 1.98.62


    Getting MCU ID

    MCU ID: 0x1081
    FLASH ID0: 267E0001 <=> SPANSION -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 267E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 267E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Checking path: C:\Program Files\Nokia\Phoenix\Products\NHL-8\
    Scanning for ini files...
    INI file .ini is missing. Continue searching for second ini type...
    Changing flashing settings...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\NHL-8\Nhl83041.3C1
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\NHL-8\Nhl83041.302
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Failed! Aborting!
    Failed to backup imei...
    MCU: C:\Program Files\Nokia\Phoenix\Products\NHL-8\Nhl83041.3C1
    Booting phone...
    MCU ID: 0x1081
    BOOT file: C:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x10D8
    Boot is ready...
    FLASH ID0: 267E0001 <=> SPANSION -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 267E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
    FLASH ID2: 267E0001 <=> SPANSION -> Type not in database Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Flash ID is 0x267E0001
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7F10; Loader chk: 86
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 8494F78186E613318C162F1B1A
    MSID decoded: 3E4EBAF7001AB07EA8000000
    FAID: A6C1183F7FA6C23E935B77FC
    Flash loader is C:\Program Files\ODEON\JAF\Flash\w3_cbusb.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x2020; Loader chk: 7f
    Additional Loader is ready...
    Operation took 0 minutes 23 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Erasing area: 00010000 - 006FFFFF...
    Error erasing area: 00010000 - 0002FFFF
    tolong ane gan...... mohon pencerahannya??????:frusty::frusty::frusty::frusty::frusty::frusty::pray::pray::pray::pray:
     
  2. feick

    feick Well-Known Member Super Member

    Messages:
    1,666
    Likes Received:
    622
    Trophy Points:
    123
    C0ba yg ringan d0l0 pak b0z,. Ganti z0kus nya,. :p
     
    Indra Indiragandi likes this.
  3. jaggerdude

    jaggerdude Well-Known Member

    Messages:
    408
    Likes Received:
    542
    Trophy Points:
    103
    Dari log tsb, kesimpulannya sama ya ... gagal dalam proses erasing.

    Coba cek kabelnya gan . Pastikan terkoneksi dengan baik.
    Coba lakukan FULL ERASE , kalo berhasil. Kemudian flashing seperti biasa.

    Selanjutnya bila masih problem sama , coba pake dengan MXkey, log posting disini.
     
    Indra Indiragandi likes this.
  4. Indra Indiragandi

    Indra Indiragandi New Member

    Messages:
    31
    Likes Received:
    3
    Trophy Points:
    0
    emang dari Zokus Bisa gagal Erase GAN????maff Newbie:rock:
     
  5. Indra Indiragandi

    Indra Indiragandi New Member

    Messages:
    31
    Likes Received:
    3
    Trophy Points:
    0
    klo masalah Kabel koneksi sich bisa di yakikan bahwa kabel 100% good tapi tar ane coba pe MX key...tar hasilnya aku kasih kabar gan ......
     
  6. Indra Indiragandi

    Indra Indiragandi New Member

    Messages:
    31
    Likes Received:
    3
    Trophy Points:
    0
    mf ane belom tau letak zokus 3660 Gan mohon pencerahannya????:pray:
     
  7. Indra Indiragandi

    Indra Indiragandi New Member

    Messages:
    31
    Likes Received:
    3
    Trophy Points:
    0

    dah ane Full erase Gan Succes tapi keterangan tetap sama:frusty:
     
  8. sisuaib

    sisuaib New Member

    Messages:
    15
    Likes Received:
    1
    Trophy Points:
    0
    kemungkinan salah satu ic flashnya rusak
    dicoba dulu erase manual satu persatu gan

    Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
    Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
    Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
     
    Indra Indiragandi likes this.
  9. jaggerdude

    jaggerdude Well-Known Member

    Messages:
    408
    Likes Received:
    542
    Trophy Points:
    103
    Ok... kalo masih sebelum vonis ke hardware . Ada baiknya coba dan maksimalkan dulu di software. Jangan maen hardware dulu.

    Setuju juga dengan Agan sisuaib , kalo semua langkah software mentok, kemungkinan ada ic flash yang gak beres. DiREHOT aja dulu.

    Catatan :
    Pastikan dah maksimal di software dulu ya.

    SEMOGA BERHASIL
     
    Indra Indiragandi likes this.
  10. Indra Indiragandi

    Indra Indiragandi New Member

    Messages:
    31
    Likes Received:
    3
    Trophy Points:
    0
    Siap Gan Ane mau beranjak ke HArdware mohon doanya:pray:
     
  11. kribogila

    kribogila Active Member

    Messages:
    167
    Likes Received:
    51
    Trophy Points:
    38
    pesan error UFS utk nokia:

    1. ERROR HDAT 14: cek kabel flash, ganti MJOLNER 85% lemah
    2. C BUS BOOT ERROR 9: skip BT flashing, ganti IC FLAH pada bloothot modul
    3. ALG BOOT ERROR 2: cek FIA anda, ganti UPP
    4. PLATFORM 3 ERROR DATA ( DCT4): change UPP
    5. ERROR 6: kerusakan 90% RAM, 10% UPP
    6. ALG BOOT ERROR 1: reball IC FLASH 3, ganti UPP
    7. ERROR 10: ganti UPP, reball IC FLASH
    8. ERROR 6 PLATFORM 7: change UPP
    9. ERROR 2 ( DCT4 ): UPP bermasalah
    10. ERROR HDAT 14 (DCT4): kerusakan pada MJOLNER
    11. WD2 ERROR BOOT: pastikan maint board OK, pastikan MJOLNER OK, cek pakai PS apabila naik 0,25 A (UEM pastikan OK) berarti UPP yang rusak, jika tidak naik/lebih dari 0,25 A berarti UEM rusak
    12. NOT CONNECTED 45: ganti U1 pada box UFS
    13. NOT CONNECTED 00: ganti C3 dan U2 pada box UFS
    14. HWK DEAD/NOT CONNECTED: ganti Q1 dan Q2




    Algorythim boot error 2 : Menggambarkan IC CPU rusak , crystal 32,768 rusak.

    >Algorythim boot error 6 : Menggambarkan IC CPU rusak , SDRAM rusak.

    >Algorythim boot error 7 : Menggambarkan IC CPU rusak

    >Algorythim boot error 8 : Menggambarkan IC CPU rusak

    >Algorythim boot error 9 : Menggambarkan Modul Bluetooth rusak.

    >Algorythim boot error 10: Menggambarkan IC CPU rusak , IC Flash rusak.:peace::peace::peace:
     

Share This Page