nokia 6303c camera stanby dan bluetoot tdk bs di di aktifkaN

Discussion in 'BB5' started by rizalcom82, Jun 18, 2011.

  1. rizalcom82

    rizalcom82 New Member

    Messages:
    256
    Likes Received:
    42
    Trophy Points:
    0
    PASIEN BRU 6303C KASUS CAMERA STANBY EN BLUTOOT TDK BS DI AKTIFKAN.

    SDH DI FLASH KE VERSI TINGGI TTP TDK ADA HSIL
    WRITE PM HSIL TTP SAMA

    COBA BECKUP EN READ DR TB CAMERA CONFIGURATION HASILNYA:

    Failed to read DCC data.
    Scanning DCC from EEPROM ...
    DCC data is absent on EEPROM.
    Camera Configuration data is empty.


    MO WRITE DCC FILE TIDAK PUNYA. DAH DI CARI KMANA2 NGA DPET2 DCC FILE NYA, TLG DG BLA REKAN2 DA YG PUNYA MHON DI UPLOAD........PLEASE....



    NE LOG NYA DGN MXKEY:

    MXKEY Serial: [FT SCR2000 0] - C0602E52
    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Driver: UFS2XX, ver: 1.6.6.0, NTMP ver: 1.6.6.1
    Module ver: 1.0.0.16978(13-05-2011), Library ver: 1.0.0.10071(13-05-2011)
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
    EM0 ID: 00000295
    EM1 ID: 00000B21
    PUBLIC ID: 0F40020805D28956A7C22CA4D88A4641D6B356FC
    ASIC MODE ID: 00
    ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    FlashID0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: NOR,CMT
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: E8E6E2AB6C2D394BC82633D2B4965E7E519E2FB2
    TransmissionMode: DDR&TX2
    Original Imei: 35603603666945
    Original Product code: 0586585
    Bluetooth ID: 002668FB7D89

    Phone Type: RM-443 (Nokia 6303 classic)
    SW Version: V 10.10 18-11-09 RM-443 (c) Nokia
    Imei plain: 35603603666945-9
    Product Code: 0577184
    Battery voltage: 4593 mV, current: 55 mA
    Language Pack:
    - not available.

    This is SL3 phone(Simlock2 format).
    - Avoid SW Downgrade & manual erase to this phone !

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed


    Imei net: 356036036669459
    Version: SIMLOCK SERVER
    Counter: 0/3, 0/10

    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN



    DAN INI HASIL SELPTEST NYA :

    Phone Type: RM-443
    SW version: V 10.10 18-11-09 RM-443 (c) Nokia

    ID Test name Startup Result
    3 EAR_DATA_LOOP Y passed
    12 SIM_CLK_LOOP Y passed
    13 SIM_IO_CTRL_LOOP Y passed
    15 SLEEP_X_LOOP Y passed
    46 UEM_CBUS_IF Y passed
    7 KEYBOARD_STUCK N passed
    22 CAMERA_IF N !no signal
    43 LCD N passed
    21 LPRF_IF N !no signal
    44 LPRF_AUDIO_LINES N !no signal
    2 CURRENT_CONS N passed
    42 RADIO Y !no signal
    69 BACKLIGHT Y passed
    33 SIM_LOCK N passed
    93 SECURITY N passed
    71 BT_WAKEUP N !no signal
    96 HOOKINT N passed
    88 TAHVOINT Y passed
    101 BTEMP N passed
    32 AMB_LIGHT_SENSOR N !no signal
    119 IIC N passed
    222 LED_CONTROLLER N passed
    56 CDSP_SLEEPCLK_FREQ N passed
    128 CDSP_SLEEPCLOCK_FREQ N passed
    86 CDSP_RF_BB_IF N passed
    77 CDSP_GSM_TX_POWER N passed
    83 CDSP_RF_SUPPLY N passed
    80 CDSP_TX_PLL_PHASE_LOCK N passed
    82 CDSP_PWR_DETECTOR_BIAS N passed
    81 CDSP_RX_IQ N passed


    TLONG LAH PARA MASTER EN MOMOD SKALIAN MHON SOLUSI NYA..............
     
  2. abdul hamid azz

    abdul hamid azz Active Member

    Messages:
    102
    Likes Received:
    10
    Trophy Points:
    28
    di write dr server mxkey om........... bisa koq,,,,,,,,:thumb:
     
  3. rizalcom82

    rizalcom82 New Member

    Messages:
    256
    Likes Received:
    42
    Trophy Points:
    0
    Mksudnya gmana bos, cara nya gmana?
     
  4. rizalcom82

    rizalcom82 New Member

    Messages:
    256
    Likes Received:
    42
    Trophy Points:
    0
    coba read from server, tab tdk tbuka bos. Sbenarnya ada nga seh yg punya dcc file nya? Smua yg upload dcc 6303i, tak coba write tdk bisa, nga support sptnya. tuk di hardware sya dah cek smua jalur en tegangan smua normal. Nmun aneh nya ko bluetoot nya ko ikut2an matek ya........ Lo hanya kamera sja biasa mmg sering nya di hardware, pnh dpt ksus kya gt en dah clear. Tp tuk yg atu ini pusing neh......... Please ae lah mhon ptunjuknya....
     
  5. rizalcom82

    rizalcom82 New Member

    Messages:
    256
    Likes Received:
    42
    Trophy Points:
    0
    spt nya ne kasus emang sulit ya......... Knapa nga da yg bantu ya.... Pa krn bnar2 sulit ne kasus spt ini. Pd kmana om momod ya....
     
  6. rizalcom82

    rizalcom82 New Member

    Messages:
    256
    Likes Received:
    42
    Trophy Points:
    0
    up.....up.......up:............
     
  7. racingzzz

    racingzzz Moderator Moderator

    Messages:
    688
    Likes Received:
    2,347
    Trophy Points:
    103
    Solusi kasus 6303c camera on standby (kamera siap) dan bluetooth bisa dicoba beberapa trik berikut:

    Untuk kamera siap lakukan beberapa pengukuran dan analisa berikut:

    1. Ganti modul kamera dengan yang bagus.

    2. Bersihkan pin-pin conektor dan angkat keatas sedikit.

    3. Lakukan pengukuran pada tegangan-tegangan yang dibutuhkan si kamera bisa bekerja dengan baik, jika ada yang tidak sesuai lakukan penggantian komponen / ic atau bisa juga dengan trik jumper dibawah ini.

    4. Reball / ganti bila perlu ic kamera


    Berikut trik jumper tegangan

    6303c-camera-on-standby.

    Dan ini untuk kasus bluetooth eror


    bluetooth1.

    Semoga bermanfaat!!
     
    zayyan08, warawiri, Broextra and 2 others like this.
  8. rizalcom82

    rizalcom82 New Member

    Messages:
    256
    Likes Received:
    42
    Trophy Points:
    0
    ok bosmakaseh tas infonya. tegangan sdh cek smua en smua normal. en camera dag coba di ganti tp hsil ttp sama. skrg hp dah wa pulangin ke user. krn klamaan.
     
  9. Broextra

    Broextra New Member

    Messages:
    22
    Likes Received:
    19
    Trophy Points:
    0
    mantap.........................
     
  10. taki1

    taki1 New Member

    Messages:
    102
    Likes Received:
    75
    Trophy Points:
    0
    Failed to read DCC data.
    Scanning DCC from EEPROM ...
    DCC data is absent on EEPROM.
    Camera Configuration data is empty.

    cuman info bos,,,,,kemaren sya juga ada kasus spt log yang di atas
    dan sya muter2 cari file DCC 6303cyang ada cuman 6303i ,,,,
    ujung ujungnya saya coba bersihkan konektor kamera bisa deh langsung buka nota hehe,,,

    coba aja bos kali aja sama
     
  11. njegrik

    njegrik Well-Known Member

    Messages:
    261
    Likes Received:
    171
    Trophy Points:
    53
    Maksudnya pakai mx=key dAN ONLINE DENGAN INTERNET
     

Share This Page