gan help E66 ane...

Discussion in 'BB5' started by dajer, Jul 3, 2011.

  1. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    gan help E66 ane matot....uda coba berbagai kabel masih tetep aja gak mau gan..
    trus ane flash pakek ufs gak mau ni lognya gan :

    CMT 1ST Boot Err: Bad Resp RAPx,
    IMAGE : rm343_510.21.009_prd.c00
    Process Failed, Repowering Mobile
     
  2. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    sundul lg ah....
    Kemana smua nih masternya...
     
  3. jaggerdude

    jaggerdude Well-Known Member

    Messages:
    408
    Likes Received:
    542
    Trophy Points:
    103
    Semoga Membantu

    Coba di info / di chek , lognya seperti apa?
    Ato coba pake box yang lain,
    Kalo lognya kurang lebih seperti itu, hardware boss, coba RAP di rehot.

    hanya newbie bukan master
     
  4. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    uda pakek mxkey tetep. Bahkan rehot dan cetak lg kaki Rap tp tetep gak mau konek ni hp.....
    Jd puyeng ma nih hp gan....
    Tolongin gan.....
     
  5. jaggerdude

    jaggerdude Well-Known Member

    Messages:
    408
    Likes Received:
    542
    Trophy Points:
    103
    Coba diposting log kalo di buschek di MXkey gmana?
    Dah dicoba pake USB ROM ?
     
  6. daryono

    daryono Active Member

    Messages:
    259
    Likes Received:
    85
    Trophy Points:
    38
    di cek dulu tegangan kerja nya gan
     
  7. berkat cell

    berkat cell Moderator Moderator

    Messages:
    3,760
    Likes Received:
    17,120
    Trophy Points:
    123

    cek tegangan kerja nya :

    Vcore = ~ 1.4 v di C2391
    Vana = ~ 2.5 v di C2217
    Vio = ~ 1.8 v di C2215
    Vdram = ~ 2.8 v di C2219
    Vr1 = ~ 2.5 v di C2213
    Purx = ~ 1.8 v di titik testpoint j2216...Clocking 32.768 khz di B2200

    analisa juga regulator N2390...cek Vbat regulatornya = ~ 3.7 v di C2390 dan L2390

    moga berhasil
     
  8. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    nih gan hasil buschek pakek mxkey :

    MXKEY Serial: [FT SCR2000 0] - C06011BB
    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Driver: uhci:hub:hub:UFS2XX, ver: 3.6.0.0 , NTMP ver: 2.6.0.0
    Module ver: 1.0.0.17743(23-06-2011), Library ver: 1.0.0.11773(23-06-2011)
    Boot error: 02 FF 72 00
    - Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
    - Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
    - On rare occasions phone might be damaged or dead. So, if possible, try with another phone.


    dan ini gan hasil flash usbROM mxkey :

    MXKEY Serial: [FT SCR2000 0] - C06011BB
    Driver: NMWCD, ver: 7.1.32.62
    Module ver: 1.0.0.17743(23-06-2011), Library ver: 1.0.0.11773(23-06-2011)
    Processing MCU file: rm343_510.21.009_prd.c00
    [BB5,XSR 1.5] size: 68.80 MB
    Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
    Make sure USB cable, Battery and charger are removed from device.
    Insert USB cable, Battery back to device(make sure to have fully charged battery).
    Insert Charger or Press phone's power button(if flashing doesnt start automatically)
    Waiting for USB device ...
    Bootstrap failed!
     
  9. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    thank gan ane cek dulu ntar hasilnya ane posting lg.......
     
  10. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    nih tegangan kerja nya gan :

    Vcore = ~ 1.2 v di C2391
    Vana = ~ 2.7 v di C2217
    Vio = ~ 1.8 v di C2215
    Vdram = ~ 3 v di C2219
    Vr1 = ~ 0 v di C2213
    Vbat regulatornya = ~ 3.7 v di C2390 dan
    ~ 1.2 v di L2390

    gimana solusinya....tolong gan....
     
  11. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    sundul lg msih nunggu solusi para suhu dan para master BB5....
     
  12. dj.orion

    dj.orion Super Moderators Super Moderator

    Messages:
    3,109
    Likes Received:
    5,147
    Trophy Points:
    123
    syarat kerja CPU di BB5 tipe ini dibagian system clock menggunakan tegangan VXO ~2.5V , bukan VR1
    Check n ukur tegangan VXO n AFC beserta clock xg dihasilkan oleh crystal
    Klo semua syarat sdh terpenuhi, kesimpulan tarikan akhir ya... CPU
     
    dajer likes this.
  13. dajer

    dajer Active Member

    Messages:
    129
    Likes Received:
    23
    Trophy Points:
    28
    thanks master ane cek dulu sorry baru lht forum
     

Share This Page