Help... X2-00 GAGAL FLASH USB DENGAN HWK

Discussion in 'BB5' started by fibram, Oct 9, 2011.

  1. fibram

    fibram New Member

    Messages:
    64
    Likes Received:
    63
    Trophy Points:
    0
    X2-00 Dipencet switch on cuma lampu berkedip lalu mati, dicoba flash dengan hwk gagal dengan log sbb:

    Insert USB Cable to Switched OFF Phone and Power ON
    USB BOOT : 56,06 [Rm-618] [2.2.0.0]
    CMT ASICID: 000000000000000022000509200C0000
    EM 1 ID : 000053FF
    CMT PUBID : 0000000000F674F329C7FD7D5C5E85B89A34513B
    CMT MODE : 00
    CMT HASH : 1B0D74C532CA1C6133940C740E8C786E
    CMT ROMID : DE56D582BDDE7A3A
    CMT 2ND Bt: BCM21351_usb2nd.fg, Ver: 11.16.0
    CMT RMID0 : 00000000-00000000
    CMT MCID0 : FFFF0000-00000000
    CMT FLID0 : 00200030-00000131, St OneNAND-1G
    CMT FLID1 : 00200030-00000131, St OneNAND-1G
    CMT RQALG : XSR 1.6
    CMT 2ND Boot OK
    CMT ALGO : BCM21351_XSR16_usbalg.fg, Ver: 11.16.0
    CMT KSIG0 : E9700989029D9E899915F781B1582048E042A738
    CMT ALG Boot OK
    IMAGE : rm618__04.90.mcusw
    CMT NAND Erase Area: 0x00000000-0001FFFF
    CMT NAND Erase Area: 0x00020000-000203FF
    CMT NAND Erase Area: 0x00060000-011BFFFF
    CMT NAND Erase Area: 0x011C0000-01CFFFFF
    CMT NAND Erase Area: 0x02500000-028FFFFF
    CMT NAND Partition Format
    CMT NAND Partition Format
    CMT FLASH ERASE OK, Time: 00:00
    ERR: CMT FLASH WRITE PROG_DATA_REQ Fail, Time: 00:20
    Process Failed, Repowering Mobile

    Mohon petunjuknya Bos, jika pernah dapat kasus kayak gini. Trims..
     
    larisya cell likes this.
  2. larisya cell

    larisya cell New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    0
    sama booos ane jg py masalah yg sama???????????????
     

Share This Page