help N_GAGE-QD

Discussion in 'WD2 & APE' started by belokan, Jan 25, 2012.

  1. belokan

    belokan Member

    Messages:
    20
    Likes Received:
    2
    Trophy Points:
    13
    mungkin ada yang mau menolong saya ini lognya via mx-key

    MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN:
    Using device: HTI, FW ver: 00.50, SN:
    Connection status: UHCI:HUB:USB 2.00 (Full-speed)
    Driver: WinUSB, ver: 3.5.1.0
    Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
    ASIC ID: 0x1081 [UPP_WD2 ver: 3.1]
    SecondaryBoot: w3_2nd.fia [WD2 BT2] version: 4.76.0 revision: 0.7 size: 0x10D8
    Supported Ids: 1080, 1081
    FlashID0: 0001 007E [AMD S29NS128J,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
    FlashID1: 0001 277E [AMD S29NS064J,64 Mbits] page size: 64 K type: NOR area: 02000000-027FFFFF
    FlashID2: 0000 0001 [unused/removed]
    FlashID3: 0000 0001 [unused/removed]
    ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
    Algorithm: w3_amd.fia [WD2 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x7F50
    Supported Ids: 1080, 1081
    Performing Flash Authentication ...OK
    UEM ID: 0096C129:2984DA7E
    ASIC type: 5
    UEM Imei: 35336000237326
    Flash Imei: 35336000237326
    RPL saved to "C:\mobileEx\3.5\data\backup\RPL\35336000237326_BACK.rpl"
    Processing MCU file: RH2941.0C1
    [WD2 BT2,WD2 ALGORITHM,WD2 CBUS BT] size: 17.60 MB
    Supported Ids: 0082, 1080, 1081
    ASIC ID: 0x1081 [UPP_WD2 ver: 3.1]
    SecondaryBoot: w3_2nd.fia [WD2 BT2] version: 4.76.0 revision: 0.7 size: 0x10D8
    Supported Ids: 1080, 1081
    FlashID0: 0001 007E [AMD S29NS128J,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
    FlashID1: 0001 277E [AMD S29NS064J,64 Mbits] page size: 64 K type: NOR area: 02000000-027FFFFF
    FlashID2: 0000 0001 [unused/removed]
    FlashID3: 0000 0001 [unused/removed]
    ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
    Algorithm: w3_amd.fia [WD2 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x7F50
    Supported Ids: 1080, 1081
    Performing Flash Authentication ...OK
    UEM ID: 0096C129:2984DA7E
    Algorithm: w3_cbusb.fia [WD2 CBUS BT] version: 4.76.0 revision: 0.7 size: 0x27
    Supported Ids: 1080, 1081
    Area [00000000-0000FFFF] erased in 0.515 s
    Area [00010000-00EFFFFF] erased in 1 min 54.687 s
    Area [02000000-02264FFF] erased in 18.672 s
    Flash programming ...
    Processing BT MCM image [0x21], size: 0x0002DD94 bytes
    Programming BT image ...
    Undefined Hdr: 000CDC08 [F2]
    Error while programming [F2] at 0x000C6000, Result: 0000
    flashing terminated !


    tolong bos-bos djawir semua
     
  2. usri

    usri Well-Known Member

    Messages:
    359
    Likes Received:
    410
    Trophy Points:
    73
    pake UFS bos, buang centang "BT flasingnya".
     
  3. drhape

    drhape New Member

    Messages:
    95
    Likes Received:
    38
    Trophy Points:
    0
    setuju dgn bos usri,,centang aja bt flashing..
    kalo pake mx key cukup centang aja yg ada tulisane BT
     
  4. belokan

    belokan Member

    Messages:
    20
    Likes Received:
    2
    Trophy Points:
    13
    udah d coba tapi tetep bos mau pake mx-box atau UFS juga sama
     
  5. belokan

    belokan Member

    Messages:
    20
    Likes Received:
    2
    Trophy Points:
    13
    problem sudah kelar bos ternyata file MCU nya corrupt setelah ganti file MCU maknyooooooossss

    terima kasih pada bos-bos semuanya....

    :closed:
     
    omron741 likes this.

Share This Page