VolcanoBox V1.5.3 Unlock Samsung I9300 etc Which Relock after Frimware update & More

Discussion in 'Volcano Box' started by REVOSupport, Sep 4, 2012.

  1. REVOSupport

    REVOSupport New Member

    Messages:
    310
    Likes Received:
    81
    Trophy Points:
    0
    !! 1st of All Watch the Video !!

    [​IMG]


    [​IMG]


    Adjust 6800H Write Flash
    Adjust 6610/20 Write Flash
    Fix 6800H bug
    Adjust Mstar Write Flash
    Adjust MTK Andriod Read Flash
    Adjust Coolsand Find Pass Algo.
    World's Most Wanted Solution = Unlock Your Samsung I9300 Etc Which RELOCK After Firmware Update... Many other failed !!

    Now in these days Many Samsung i9300 coming which are Relocked by users & Shop keepers after Firmware update.... Your phone will Unlocked but when you update firmware your phone will Relock and then Trouble comes. after relock many other devices are failed to unlock again. So we specially make solution for them who have phones in hand with this condition. other boxes say phone unlocked but actually phone is still locked. this problem came in new firmwares in phones. you get unlock your phone by Service center and you update your firmware and after update your phone will Relock like these type of trouble you can easily solve with VolcanoBox. simply Root your phone....Connect usb cable....select model and Tick on ADB unlock thats it.... after run in few mins your phone will Unlock and Will Not RELOCK AGAIN !! How's that [​IMG]


    MTK Android Flashing Hints & Tips


    In these days lot of Chinese mobiles comes with MTK 65xx Cpu
    like MTK 6575, 6516, 6573, 6577 etc
    mostly all of them are supported by Volcano Box
    in some phone there have some tricks to connect which i want to share with you guys. we support Almost All mtk Android phones for ReadFlash, Write Flash, Repair imei etc All you can do with simple usb cable. No need to find rx tx or opening phones, as Rx Tx method is really slow so we don't do it yet. so for imei repair you have to perform these steps
    1- Insert sim into phone
    2- Insert Battery into phone
    3- power on phone
    4- Make sure Usb Debug mode on
    5- Connect Usb cable
    6- install drivers
    7- open volcano -> mtk -> press ALT + CTRL + i
    8- Select Android Tool
    9- Press run & read instructions
    Your phone's imei will repair


    for Read or Write flash just perform these steps
    1- open volcano -> mtk
    2- select boot 7.1216
    3- select Read Flash or Write flash ( if write Flash select Flash file 1st)
    4- Tick usb mode
    5- Insert battery into phone
    6- Press Run button
    7- inset usb cable
    Your phone will read flash or write flash as you select Desire option !!
    There is some boot keys for these Android phones
    Some phones you need to press and hold these keys before plug usb cable
    Vol +
    Vol -
    Vol + and Vol -
    Camera key
    Vol - and power button
    Vol + and power button
    Vol - and vol + and power
    camera key and power
    camera key and vol +
    camera key and vol -
    power button

    we face some phones which need these boot keys rest you can play with them [​IMG]


    [​IMG]
     
    feick likes this.
  2. feick

    feick Well-Known Member Super Member

    Messages:
    1,666
    Likes Received:
    622
    Trophy Points:
    123
    .....good volcano team.....
     

Share This Page