nokia....asha202

Discussion in 'MxKey Dongle' started by apes, Dec 19, 2012.

  1. apes

    apes Member

    Messages:
    72
    Likes Received:
    18
    Trophy Points:
    18
    um...momod...nokia....asha....202...bisa...d...flash...pake...hti...box...gk???
     
  2. samnawi

    samnawi Moderator Moderator

    Messages:
    1,148
    Likes Received:
    2,164
    Trophy Points:
    123
    Bisa Boss ..

    copas
    NOKIA ASHA 202 FULL FLASH DONE

    Device synchronized.
    CPU: XGOLD 213
    Sending EBL Loader...OK
    Sending EBL ...OK
    Getting EBL Version ...
    Boot mode: 0xCC
    EBL version major/minor: 10.37
    EBL version: Quantum_Bootloader_10.37_M1S1
    Protocol version suggested by phone: 3
    Set baud rate to: 6.50 Mbit/s
    Flash ID: 00EC 3012 - 23280002 [Samsung ]
    CFI information:
    Flash settings: 0/1024, size: 0x04000000
    1 Block regions:
    512 x 0x00020000 = 0x04000000
    EBL ready !
    Original IMEI:
    RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD__back.RPL"
    Processing file: rm834__20.50.mcusw
    Downloading item CODE:rm834__20.50.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
    Erasing area 0x40000000-0x4001FFFE ...OK
    Programming completed in 0.359 s
    Erasing area 0x40040000-0x4005FFFE ...OK
    Programming completed in 0.360 s
    Erasing area 0x40060000-0x4015FFFE ...OK
    Programming completed in 1.547 s
    Erasing area 0x40280000-0x41D3FFFE ...OK
    Programming completed in 57.093 s
    Checksum verified (0x635E)
    Processing file: rm834__20.50.ppm_v
    Downloading item CUSTackage_v.ppm_ebl_psi.fls, num block: 1, size: 5.81 MB
    Erasing area 0x41DC0000-0x4238F3EA ...OK
    Programming completed in 9.453 s
    Checksum verified (0xFA43)
    Processing file: rm834__20.50.image_v_059P2P4
    Downloading item CUSTackage_v_059P2P4.image.fls, num block: 1, size: 12.75 MB
    Erasing area 0x424C0000-0x43E1FFFE ...OK
    Programming completed in 23.453 s
    Checksum verified (0xF057)
    Total time for flashing process(boot+erase+write) was 4 min 27.078 s
    Waiting for USB device removal ...OK
    Waiting for USB device arrival ...
    Waiting for device boot up ...
    Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 2BF6639E
    Verifying communication to device OK.



    Phone type: RM-834 (202)
    Software version: V 20.50 21-08-12 RM-834 (c) Nokia
    Imei plain: 35285305104234-5
    Product code: 059M6C0
    Language Pack:
    - not available.

    Imei net: 35285305104234
    Version: SIMLOCK SERVER
    Provider: GSM Test Operator
    Counter: 0/3, 0/10

    CONFIG_DATA: 0010100000000000
    PROFILE_BITS: 800000000003000B

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
     
    apes likes this.
  3. apes

    apes Member

    Messages:
    72
    Likes Received:
    18
    Trophy Points:
    18
    matursuwun...bos...via...kabel...usb...apa...rj45...bisa...d...jelasin...step...by...step????pleassssssssseeeee
     
  4. samnawi

    samnawi Moderator Moderator

    Messages:
    1,148
    Likes Received:
    2,164
    Trophy Points:
    123
    Via USB Boss
    Sebelum bus chek / Flash masukkan dahulu File flashnya (MCU, PPM & CNT)
    Setelah itu ikuti saja perintah dari Mxkey seperti contoh dibahawah inii:


    Make sure USB cable, Battery and charger are removed from device.
    Insert USB cable, Battery back to device(make sure to have fully charged battery).
    Insert Charger or Press phone's power button(if flashing doesnt start automatically)
    Waiting for USB ROM device ...
    Device synchronized.
    CPU: XGOLD 213
    Sending EBL Loader...OK
    Sending EBL ...OK
    Getting EBL Version ...
    Boot mode: 0xCC
    EBL version major/minor: 10.37
    EBL version: Quantum_Bootloader_10.37_M1S1
    Protocol version suggested by phone: 3
    Set baud rate to: 6.50 Mbit/s
    Flash ID: 00EC 3012 - 23280002 [Samsung ]
    CFI information:
    Flash settings: 0/1024, size: 0x04000000
    1 Block regions:
    512 x 0x00020000 = 0x04000000
    EBL ready !

    dan seterusnya.
    :thumb:
     
    andicellallu likes this.
  5. apes

    apes Member

    Messages:
    72
    Likes Received:
    18
    Trophy Points:
    18
    via...usb...driver...gk...kedetek...bos...apa...perlu...d...instal...dulu...driver...y???
     
  6. apes

    apes Member

    Messages:
    72
    Likes Received:
    18
    Trophy Points:
    18
    mkasih...bos...udah...bisa...nehhh....cendollll...segerrrrr
     
  7. tibiacell

    tibiacell New Member

    Messages:
    28
    Likes Received:
    4
    Trophy Points:
    0
    bos sesudah flash complete...di butuhkan setting ui gk bos...soalnya punyaku failed trus...tp hp nyala dg normal...mohon penjelasannya ...maklum aku baru amatiran.
     

Share This Page