Asha 309/3090 RM-843 Full Flashing atf box

Discussion in 'ATF (Advance Turbo Flasher)' started by Revo Support, Jan 2, 2013.

  1. Revo Support

    Revo Support New Member

    Messages:
    407
    Likes Received:
    180
    Trophy Points:
    0
    [​IMG]


    Here are the Screenshots:

    Quick Backup RPL
    [​IMG]

    Full Flash
    [​IMG]



    Here is the Flashing Logs:

    Code:
    Number of Image Files: 3
    
    Processing Image File : 
     rm843__05.85.mcusw
    CMT Type : XG223
    CMT Algorithm : XG223_V0 ALG
    Secondary Sending Speed    : 650000Hz
    Algorithm Sending Speed    : 6500000Hz
    Program Sending Speed      : 6500000Hz
    Message Reading Speed      : 98000Hz
    Number of Blocks :  90
    Entry Point:  0x037D
    Page Format : -1
    MAX PAGE : 0x00080000
    
    Processing Image File : 
     rm843__05.85.ppm_t
    CMT Type : XG223
    CMT Algorithm : XG223_V0 ALG
    Secondary Sending Speed    : 650000Hz
    Algorithm Sending Speed    : 6500000Hz
    Program Sending Speed      : 6500000Hz
    Message Reading Speed      : 98000Hz
    Number of Blocks :  15
    Entry Point:  0x0368
    Page Format : -1
    MAX PAGE : 0x00080000
    
    Processing Image File : 
     rm843__05.85.image_t_059P053
    CMT Type : XG223
    CMT Algorithm : XG223_V0 ALG
    Secondary Sending Speed    : 650000Hz
    Algorithm Sending Speed    : 6500000Hz
    Program Sending Speed      : 6500000Hz
    Message Reading Speed      : 98000Hz
    Number of Blocks :  86
    Entry Point:  0x00B5
    Page Format : -1
    MAX PAGE : 0x00080000
    
    
    
    AUTO SELECTED DEAD USB FLASHING...
    
    If Phone Booting does not Start in 5 Seconds,
    Then Perform Steps 1, 2, 3 and 4...
    
    1. Remove USB and Battery...
    2. Insert USB.
    3. Insert Battery. (Some phones boot automatically)
    4. Please Power on phone shortly...
    
    AdvanceFBox SendBootCodeEx
    InitialiseBootstrap_DCT5 DIR
    BootFlashMode_DCT5
    READING BOOTROM
    
    BootFlashModeDCT5Ex Succeeded First Time
    SYSTEM_ID_RESPONSE_BB5 (0xC0) - 82  (0x52) bytes returned
    Number of Sub Blocks 5 (0x05)
      1  SYSTEM_ASIC_ID 01
         Block Length  : 21  (15)
         BB ASIC Index : 0  (00)  CMT
         ID DWORD    0 : 00000C20
         ID DWORD    1 : 16100040
         ID DWORD    2 : 29922088
         ID DWORD    3 : 89D8D9D4
         ID DWORD    4 : E653DF00
      2  PUBLIC_ID 12
         Block Length  : 21  (15)
         BB ASIC Index : 0  (00)  CMT
         ID DWORD    0 : C422B54A
         ID DWORD    1 : C81C0946
         ID DWORD    2 : 29922088
         ID DWORD    3 : 89D8D9D4
         ID DWORD    4 : E653DF00
      3  ASIC_MODE_ID 13
         Block Length  : 2  (02)
         BB ASIC Index : 0  (00)  CMT
         Mode Id       : 00
      4  ROOT_KEY_HASH 14
         Block Length  : 17  (11)
         BB ASIC Index : 0  (00)  CMT
         Hash          :  12 5F C7 26 05 B5 C4 E4 8A 9E 02 25 08 4D 25 79 
      5  ROM_ID 15
         Block Length  : 9  (09)
         BB ASIC Index : 0  (00)  CMT
         CRC         0 : 53588225
         CRC         1 : 2F54C676
    
    CMT Secondary Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\XG223_v11_usb2nd.fg
    Secondary Loader Sent....
    CMT Algorithm Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\XG223_v11_usbalg.fg
    Algorithm Loader Sent....
    
    FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
    FUR control Ok
    
     START READING RPL DATA
    NPC is Corrupted...
    ERROR: NPC is Corrupted..., 3
     RPL Backup is Skipped
    Pabub KEY Request 
     No PAPUBKeysHash Returned
    ImagePath: C:\Nokia Firmware\RM-843\
    ImageFilename: rm843__05.85.mcusw
    Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
    Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT  00 only)
    Certificate 1
      Name        : NPC
      ASIC Index  : CMT  0
    Certificate 2
      Name        : CCC
      ASIC Index  : CMT  0
    Certificate 3
      Name        : HWC
      ASIC Index  : CMT  0
    Certificate 4
      Name        : R&D
      ASIC Index  : CMT  0
    STORE_CERTIFICATE_REQUEST_BB5 : 61 04 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 D3 
    STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
    StartErase_DCT5...
    BlockLength  :  0x2E  (46)
    ERASE Blocks :  0x01  (1)
         0   ERASE_AREA_BB5 0x12
                Block Length     : 0x2B (43)
                BB ASIC Index    : 0x00 CMT
                Device Type      : 0x00 NOR
                Device Index     : 0x00
                   0             : 40000000-4003FFFF
                   1             : 47E00000-47E3FFFF
                   2             : 400A0000-4251FFFF
                   3             : 42520000-4261FFFF
                   4             : 47E40000-47F1FFFF
    
    ERASE_REQUEST_BB5  : 5005120B000000400000004003FFFF120B00000047E0000047E3FFFF120B000000400A00004251FFFF120B000000425200004261FFFF120B00000047E4000047F1FFFF28
    
    Successfully Erased...
    Total blocks to write : 90
    >>  CMT Rootkey Hash CERT : ISSW
    >>  CMT Rootkey Hash CERT : MEMSET
    >>  CMT Rootkey Hash CERT : PRIMAPP
    >>  CMT Rootkey Hash CERT : LOADER
    >>  CMT Rootkey Hash CERT : PASUBTOC
    >>  CMT Rootkey Hash CERT : PAPUBKEYS [42E7CDDAAE2ACD72926AC996E98AEC576D7840C3]
    >>  CMT Rootkey Hash CERT : UPDAPP
    >>  CMT Rootkey Hash CERT : MCUSW
    ImagePath: C:\Nokia Firmware\RM-843\
    ImageFilename: rm843__05.85.ppm_t
    StartErase_DCT5...
    BlockLength  :  0x0E  (14)
    ERASE Blocks :  0x01  (1)
         0   ERASE_AREA_BB5 0x12
                Block Length     : 0x0B (11)
                BB ASIC Index    : 0x00 CMT
                Device Type      : 0x00 NOR
                Device Index     : 0x00
                   0             : 42620000-42FFFFFF
    
    ERASE_REQUEST_BB5  : 5001120B0000004262000042FFFFFFFE
    
    Successfully Erased...
    Total blocks to write : 15
    ImagePath: C:\Nokia Firmware\RM-843\
    ImageFilename: rm843__05.85.image_t_059P053
    StartErase_DCT5...
    BlockLength  :  0x0E  (14)
    ERASE Blocks :  0x01  (1)
         0   ERASE_AREA_BB5 0x12
                Block Length     : 0x0B (11)
                BB ASIC Index    : 0x00 CMT
                Device Type      : 0x00 NOR
                Device Index     : 0x00
                   0             : 43000000-47DFFFFF
    
    ERASE_REQUEST_BB5  : 5001120B0000004300000047DFFFFF7A
    
    Successfully Erased...
    Total blocks to write : 86
    ContinueFlash_DCT5 Complete
    Continue Flash Complete :  : No Error - 0 (0x00)
    FlashInfo.RestartMode : Test Mode
    
    Flashing Done...
    Total Flashing Time (Erase + Flashing) : 00:00:41
    (Booting time is NOT Included)
    
    Waiting for Phone to Start-Up..(Max 150 seconds)
    
    
    SW: V 05.85 23-10-12 RM-843 (c) Nokia
    IMEI: 352841053208592
    CONFIG KEY    :  0000000000000000
    PROVIDER KEY  :  2440700000000000
    NETWORK NAME  :  Nokia Default;Finland
    LOCK COUNTERS :  KEYPRESS 0/3,  FBUS 0/10
    SIMLOCK TABLE :
       Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
    SIMLOCK STATE :  Not Locked
    
    SIMLOCK_TEST             : PASSED
    SECURITY_TEST           : PASSED
    SUPER_DONGLE_TEST  : PASSED
    SECURITY_CODE          : 12345
    
    ================================================
                   SL3 Phone detected                
    ================================================
                                                    
    * Firmware Version Downgrade will KILL PHONE !!!
    * Manual Full Erase WILL KILL PHONE!!!          
    * Simlocks are in PM 120 Only...                
    * PM 308 is Write Protected...                  
    
    
    FACTORY SET TO : Full Factory Set
     OK
    FACTORY SET TO : User Data
     OK
    FACTORY SET TO : Leave Factory
     OK
    FACTORY SET TO : Service Center
     OK
    FACTORY SET TO : Software Upgrade
     OK
    FACTORY SET TO : Production Tune
     OK
    
    
    Life timer data is not yet used...
    Life timer: ----:--
     

Share This Page