C2-03 RM-702 with ATF

Discussion in 'ATF (Advance Turbo Flasher)' started by Revo Support, Jan 19, 2013.

  1. Revo Support

    Revo Support New Member

    Messages:
    407
    Likes Received:
    180
    Trophy Points:
    0
    C2-03 RM-702 with ATF

    Code:
    Number of Image Files: 3
    
    Processing Image File : 
     rm702__06.51.mcusw
    Processing Image File : 
     rm702__06.51.ppm_m_c
    Processing Image File : 
     rm702__06.51.image_m_c_059D477
    
    
    AUTO SELECTED DEAD USB FLASHING...
    
     If Flashing DOES NOT Start in 5 Seconds,
     Then Perform Steps 1, 2, 3 and 4...
    
    1. Remove USB and Battery...
    2. Insert USB.
    3. Insert Battery. (Some phones boot automatically)
    4. Please Power on phone shortly..
    
    
    Infineon USB Boot: F00A1FB300020303010100FF
    Sending PBL...
    PBL Successfully Sent...
    Sending SBL...
    SBL Successfully Sent...
    Setting Transmission Speed Done...
    Flash Chip Manufacturer: Intel Electronics Corp.
    Flash Boot Successful...
    
    
    
    Current File    : rm702__06.51.mcusw
    Image Type   : Main Firmware
    Sections         : 04
    Compile Name: rm702__06.51.mcusw_ebl_psi.fls
    Data Size       : 29363592 Bytes
    
    Sending Certificate Block
    FIRMWARE Certificate Block Sent Successfully...
     Processing Section 01 of 04
    FIRMWARE Erase Block: 0x40000000~0x4001FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: EE63
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
     Processing Section 02 of 04
    FIRMWARE Erase Block: 0x40040000~0x4005FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: 7AB2
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
     Processing Section 03 of 04
    FIRMWARE Erase Block: 0x40060000~0x4015FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 1048576 bytes
    Data Checksum: 9291
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
     Processing Section 04 of 04
    FIRMWARE Erase Block: 0x40280000~0x41DBFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 28049408 bytes
    Data Checksum: 4765
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Data Verification Successful...
    
    
    Current File    : rm702__06.51.ppm_m_c
    Image Type   : PPM Image
    Sections         : 01
    Compile Name: package_m_c.ppm_ebl_psi.fls
    Data Size       : 5282476 Bytes
    
    Sending Certificate Block
    PPM Certificate Block Sent Successfully...
     Processing Section 01 of 01
    PPM Erase Block: 0x41DC0000~0x424BFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 5279132 bytes
    Data Checksum: 4866
    Uploading Data Blocks to phone...
    Block Write Successful...
    PPM Data Blocks uploaded to phone...
    Data Verification Successful...
    
    
    Current File    : rm702__06.51.image_m_c_059D477
    Image Type   : CONTENT Package
    Sections         : 01
    Compile Name: package_m_c_059D477.image.fls
    Data Size       : 11275536 Bytes
    
    Sending Certificate Block
    CONTENT Certificate Block Sent Successfully...
     Processing Section 01 of 01
    CONTENT Erase Block: 0x424C0000~0x43E1FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 11272192 bytes
    Data Checksum: C8F9
    Uploading Data Blocks to phone...
    Block Write Successful...
    CONTENT Data Blocks uploaded to phone...
    Data Verification Successful...
    Total Flashing Time (Erase + Flashing) : 00:07:14
    (Booting time is NOT Included)
    
    Waiting for Phone to Start-Up..(Max 150 seconds)
    
    Elapsed Time: 5 Seconds...
    Elapsed Time: 10 Seconds...
    
    FACTORY SET TO : Full Factory Set
     OK
    FACTORY SET TO : User Data
     OK
    FACTORY SET TO : Leave Factory
     OK
    FACTORY SET TO : Service Center
     OK
    FACTORY SET TO : Software Upgrade
     OK
    FACTORY SET TO : Production Tune
     OK
    
    MCU: V 06.51 15-07-11 RM-702 (c) Nokia
    IMEI: 358266044681042 
    Model : K        C2-03
    Product Serial Number: 3440260AH
    Product Code         : 059D436
    Module Code          : 0204579
    Basic Production Code: 059C0J7
    Default SN Type      : 0
    MCU SW Version       : V 06.51 15-07-11 RM-702 (c) Nokia             M_C
    BT MCM Version       : 19b5-22012
    PPM Version          : V 06.51 15-07-11 RM-702 (c) Nokia
    HW Version           : 1000
    RFIC Version         : Dummy RFIC version
    LCD Version          : TPO
    Content Pack Version : Content: m_c_059D477 V 06.51 15-07-11 RM-702 (c) Nokia
      ********** SIMLOCK INFO  ********** 
    CONFIG_DATA  : 0010100000000000
    PROFILE_BITS : 800000000003000B
    Asic   : 11
    Provider  :  Default Test Operator
    
       Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
       Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
    ST_SIMLOCK_TEST       : PASSED
    ST_LCD_TEST               : PASSED
    SECURITY_CODE          : 12345
    MASTER_CODE             : 3762707267
    PHONE_MODE              : TEST MODE
                                                    
    ================================================
              Dynamic Camera Configuration          
    ================================================
    DCC ID  : 094B2F01
    DCC Ver: 008017
    Status   : OK
    
    
    
    [​IMG]
     
  2. argamcell

    argamcell New Member

    Messages:
    25
    Likes Received:
    6
    Trophy Points:
    0
    numpang tanya bos y, bisa ga kita flashing cnt only untuk C2-03 RM-702 dengan ATF ?
     
  3. Aminudinn

    Aminudinn New Member

    Messages:
    55
    Likes Received:
    7
    Trophy Points:
    0
    solusinya gmn bos C2-03 simlock failed via ATF nitro Box, mohon pencerahan.tolongggggggggg!!!!!!!!!
    :cry::cry::cry:
     

Share This Page