Software Pulsa Tiger Engine
Kiswara

SUKSES FLASH NOKIA ASHA 202 by : MX-KEY

Discussion in 'Nokia ODM' started by elbruzcell, Jan 30, 2013.

  1. elbruzcell

    elbruzcell New Member

    Messages:
    18
    Likes Received:
    2
    Trophy Points:
    0
    MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: C0602C99
    Using device: USB Phonet and HTI, FW ver: 00.50, SN: 0100301A
    Connection status: UHCI:HUB:USB 2.00 (Full-speed)
    Driver: nmwcdc, ver: 7.1.32.75
    Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
    Battery voltage: 3852 mV
    Waiting for USB device removal ...OK
    Waiting for USB device arrival ...OK
    Make sure USB cable, Battery and charger are removed from device.
    Insert USB cable, Battery back to device(make sure to have fully charged battery).
    Insert Charger or Press phone's power button(if flashing doesnt start automatically)
    Waiting for USB ROM device ...
    Device synchronized.
    CPU: XGOLD 213
    Using embedded SBL from MCU.
    Sending EBL Loader...OK
    Sending EBL ...OK
    Getting EBL Version ...
    Boot mode: 0xCC
    EBL version major/minor: 10.47
    EBL version: Quantum_Bootloader_10.47_M1S1
    Protocol version suggested by phone: 3
    Set baud rate to: 6.50 Mbit/s
    Flash ID: 00EC 3012 - 23280002 [Samsung ]
    CFI information:
    Flash settings: 0/1024, size: 0x04000000
    1 Block regions:
    512 x 0x00020000 = 0x04000000
    EBL ready !
    Original IMEI: 35326405xxxxx2
    IMEI_DATA saved OK
    CCC_DATA saved OK
    HWC_DATA saved OK
    LOCK120_DATA saved OK
    RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_3532640xxxxxx2_back.RPL"
    Processing file: 1902E4DA_rm834__20.28.mcusw
    Downloading item CODE:rm834__20.28.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
    Erasing area 0x40000000-0x4001FFFE ...OK
    Programming completed in 0.343 s
    Erasing area 0x40040000-0x4005FFFE ...OK
    Programming completed in 0.359 s
    Erasing area 0x40060000-0x4015FFFE ...OK
    Programming completed in 1.485 s
    Erasing area 0x40280000-0x41D3FFFE ...OK
    Programming completed in 35.656 s
    Checksum verified (0xF07A)
    Processing file: 0515D332_rm834__20.28.ppm_x
    Downloading item CUST: package_x.ppm_ebl_psi.fls, num block: 1, size: 5.31 MB
    Erasing area 0x41DC0000-0x4230EAF6 ...OK
    Programming completed in 7.906 s
    Checksum verified (0x389C)
    Processing file: 90E28172_rm834__20.28.image_x_059M6H8
    Downloading item CUST: package_x_059M6H8.image.fls, num block: 1, size: 12.25 MB
    Erasing area 0x424C0000-0x43E1FFFE ...OK
    Programming completed in 15.953 s
    Checksum verified (0x9726)
    Total time for flashing process(boot+erase+write) was 3 min 50.344 s
    Waiting for USB device removal ...OK
    Waiting for USB device arrival ...
    Waiting for device boot up ...
    Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 214D7F6C
    Verifying communication to device OK.



    Phone type: RM-834 (202)
    Software version: V 20.28 22-03-12 RM-834 (c) Nokia
    Imei plain: 35326405xxxxxx-2
    Product code: 059N1M0
    Battery voltage: 3852 mV, current: 186 mA
    Cellular system: GSM
    ASIC ID: 0x0000, type: 11
    Ppm Id: X
    Language Pack:
    - not available.

    Master code: 4206524757
    Camera config: 0A350160006015, ver:

    Imei net: 3532640xxxxxx2
    Version: SIMLOCK SERVER
    Provider: GSM Test Operator
    Counter: 0/3, 0/10

    CONFIG_DATA: 0010100000000000
    PROFILE_BITS: 800000000003000B

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    FULL FACTORY... OK
    USER DATA... OK
    LEAVE FACTORY... OK
    SERVICE CENTER... OK
    SOFTWARE UPGRADE... OK
    PRODUCTION TUNING... OK
    Reset User Code (to default:12345) ... OK
    Completed in 0.110 s
     

    Mobile Connection

Share This Page