repair scurity nokia x2-01.......?

Discussion in 'Cyclonebox' started by Nina Hayati, Mar 11, 2013.

Thread Status:
Not open for further replies.
  1. Nina Hayati

    Nina Hayati Member

    Messages:
    25
    Likes Received:
    16
    Trophy Points:
    13
    Pagi all, Langsung aja saya punya permasalahan dengan nokia x2-01 (rm-709).........Kondisi hp WD, Dan setelah di repair superdonglenya, Hp jadi Contack Service, mungkin karena scurity nya jadi faild, Ada yang tahu ga cara ngebetulin securytinya.....?????
    Untuk ngerepair scuryti Hp harus dalam ke adaan Normal mode ( via usb ), Sedangkan kalo hp contack service ga bisa masuk Normal Mode.
    Saya menggunakan bok cyclone, MXKEY Belum suport Repair SD via USB.
    Yang pernah ngalamain kasus sama, mohon bingbingannya. Sebelumnya saya ucapkan terimakasih


    Log Check Flashing Bus :

    Booting CMT...
    [X2-01 USB Phonet]: Port opened OK!
    Switching to RAW Mode...
    [Nokia USB Flashing Generic]: Port opened OK!
    New ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
    CMT_EM_ASIC_ID: 00005361
    CMT_PUBLIC_ID: 0000000000C888F510C4BA16321F0025672CDAC0
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
    CMT_BOOT_ROM_CRC: DE56D582
    CMT_SECURE_ROM_CRC: BDDE7A3A
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.12.8.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020003000000131, ST, NOR
    FlashChip[1,CMT]: 0x0010001100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020003000000131, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200030 (ST), Size: 128MBytes, VPP: Not Supported
    FlashChip 0x00200030 (ST), Size: 128MBytes, VPP: Not Supported
    BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.12.8.0, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 37955B6FC432998EF0DB240E332228384D19ED09
    APE Boot skipped on user request
    Restarting MCU...
    [Nokia USB Flashing Generic]: Port opened OK!

    Log info :


    [X2-01 USB Phonet]: Port opened OK!
    MCU Version V 08.70
    MCU Date 29-07-11
    Product RM-709 (Nokia X2-01)
    Manufacturer (c) Nokia
    IMEI 352856051240132
    Mastercode 3043656533
    IMEI Spare 3A25580615421003
    IMEI SV 3325580615421043F2000000
    PPM V 08.70, 29-07-11, RM-709, (c) Nokia , X
    CNT Content: x_059C2X7, V 08.70, 29-07-11, RM-709, (c) Nokia
    PSN CIU445018
    Product Code 059F8K3
    Module Code 0204674
    Basic Product Code 059B5F0
    PSD 0000000000000000
    LPSN 0
    Hardware 1001
    Failed to read info -> Failed to read extended info



    Log MXKEY :


    Phone type: RM-709 (X2-01)
    Software version: V 08.70 29-07-11 RM-709 (c) Nokia
    Imei plain: 35285605124013-2
    Product code: 059F8K3
    Battery voltage: 3764 mV, current: 108 mA
    Language Pack:
    - not available.

    SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
    warning: avoid Software Downgrade & manual erase to this phone !
    Camera config: NI00BC00000401022C00, ver: XXX.XXX
    warning: DCC corrupted !

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY invalid!
    - WD timer enabled, phone will reboot itself after 3 min.

    SIMLOCK_TEST passed
    SECURITY_TEST passed


    Imei net: 352856051240132
    Version: SIMLOCK SERVER
    Counter: 0/3, 0/10

    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN



    Dan setelah repair SD pake cyclone HP jadi konser

     
  2. Nina Hayati

    Nina Hayati Member

    Messages:
    25
    Likes Received:
    16
    Trophy Points:
    13
    Alhamdulilah berhasil,

    Log Cyclone :


    Started Phone Security Analysis...
    [X2-01 USB Phonet]: Port opened OK!
    MCU Version V 08.70
    MCU Date 29-07-11
    Product RM-709 (Nokia X2-01)
    Manufacturer (c) Nokia
    IMEI 352856051240132
    Mastercode 3043656533
    Reading Security Block...
    Security block OK and saved to "RM-709_352856051240132_11032013_191441.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    "0000000000C888F510C4BA16321F0025672CDAC0.B0000CB7" Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking ECC KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!

    Log MXKEY :

    Phone type: RM-709 (X2-01)
    Software version: V 08.70 29-07-11 RM-709 (c) Nokia
    Imei plain: 35285605124013-2
    Product code: 059C346
    Battery voltage: 3738 mV, current: 65183 mA
    Language Pack:
    - not available.

    SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
    warning: avoid Software Downgrade & manual erase to this phone !
    Camera config: NI00BC00000401022C00, ver: 003.006

    SIMLOCK seems to be valid
    SUPERDONGLE_KEY seems to be valid
    SIMLOCK_TEST passed
    SECURITY_TEST passed



    Imei net: 352856051240132
    Version: SIMLOCK SERVER
    Counter: 0/3, 0/10

    CONFIG_DATA: 2440700000000000
    PROFILE_BITS: 0000000000000000

    BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
    BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

    Mautau caranya..............
    Downloads Files di bawah, setelah selesai, extrak ke Program Files/Cyclone Box/SX4............Yang udah ada di oferwite..............
    Barangkali dari teman2 nemui kasus sama, nokia X2-01 ( RM-709 )......SD Damage atau Scuryti Faild .....Ada sedikit solusi :
    Buka Cyclone Box, setelah terbuka Masuk ke tab COMMON-Conection- Pilih USB, Buka tab BB5-Flash- pilih RM-709, Setelah itu masuk ke Tab SECURITY-Authorizr/repair SD keys (force using sx4 server jangan di checklis, Setelah itu click SECURITY-Authorizr/repair SD.....................dan setelah selesai Masuk ke tab Analize Scurity.............Mudah2an bisa bikin nota,.........AMIIIIIIN........


    NB: HP dalam keadaan Conser Tidak bisa Local mode, Caranya Masukin batu batery, colokin Carger, tancapkan usb, biarkan jangan di otak-atik...........
     

    Attached Files:

    mamuk likes this.
Thread Status:
Not open for further replies.

Share This Page