Nokia 200 flashing done with zzkey

Discussion in 'zzKey Dongle' started by Revo Support, Jul 22, 2013.

  1. Revo Support

    Revo Support New Member

    Messages:
    407
    Likes Received:
    180
    Trophy Points:
    0
    [​IMG]






    Code:
    getting internal zzdongle internal firmware...
    Zznk internal firmw: Nkt v0.13
    checking authorize update in dongle...
    Dongle counter status: 39%
    initialization finished...
    Ready...
    ------------------------------------------------------------------------------------------------------------------------
    usb port selected.
    ------------------------------------------------------------------------------------------------------------------------
    bb5 flash started...
    Infineon flash started...
    Connect phone ,remove/connect baterry and press shortly power on button...
    If software appear hang , please disconnect cable and try again.
    Bootmsg : F00a1fb300020303010100ff
    xgold213 cpu detected.
    Sending 2nd from core...
    Botting 2nd...done!. (0x01)
    running ,: (0xaa)
    sending algo from core...
    Boot:quantum_bootloader_10.46_m1s1
    negotiating speed...done! (6500000)
    flashid: 89008289
    boot ok
    
    flashing mcu
    writing: Rm761__11.81.mcusw_ebl_psi.fls
    finding cert(s)... Done!
    Sending cert(s)...done!
    Founded 5 region(s).
    Erasing area 0x40000000 - 0x40020000
    erase done.
    Writting area 0x40000000 - 0x40020000
    area flash done.
    Erasing area 0x40040000 - 0x40060000
    erase done.
    Writting area 0x40040000 - 0x40060000
    area flash done.
    Erasing area 0x40060000 - 0x40160000
    erase done.
    Writting area 0x40060000 - 0x40160000
    area flash done.
    Erasing area 0x40280000 - 0x41a80000
    erase done.
    Writting area 0x40280000 - 0x41a80000
    area flash done.
    Erasing area 0x43e20000 - 0x43e60000
    erase done.
    Nothing to write,skipping area...
    Mcu flash sucessfully
    flashing cnt
    writing: Package_t_059j569.image.fls
    finding cert(s)... Done!
    Sending cert(s)...done!
    Founded 2 region(s).
    Erasing area 0x421c0000 - 0x43e20000
    erase done.
    Writting area 0x421c0000 - 0x430c0000
    area flash done.
    Erasing area 0x43e60000 - 0x43f40000
    erase done.
    Nothing to write,skipping area...
    Cnt flash sucessfully
    flashing ppm
    writing: Package_t.ppm_ebl_psi.fls
    finding cert(s)... Done!
    Sending cert(s)...done!
    Founded 1 region(s).
    Erasing area 0x41a80000 - 0x421c0000
    erase done.
    Writting area 0x41a80000 - 0x420c2ba8
    area flash done.
    Ppm flash sucessfully
    rebooting phone...
    Operation done!.
    *****************************************
    read info started...
    
    Detecting phone...
    Not phone detected, please check cable and try again...
    Operation failed...
    *****************************************
    read info started...
    
    Detecting phone...
    Sw version: V 11.81 20-08-12 rm-761 (c) nokia
    phone model: Nokia 200
    imei: 352415050576945
    ------------------------------------------------------------------------------------------------------------------------
    generation type: Infineon xgold 213
    ------------------------------------------------------------------------------------------------------------------------
    asic type: 11
    config bits: 0010100000000000
    profile bits: 800000000003000b
    hw sing: A0e118f171425c1b
    blocks: 7
    
    block 1
    5. Mcc+mnc (usim) .open 6. Gid1 (usim) .open 7. Gid2 (usim) .open
    block 2
    5. Mcc+mnc (usim) .open 6. Gid1 (usim) .open 7. Gid2 (usim) .open
    block 3
    5. Mcc+mnc (usim) .open 6. Gid1 (usim) .open 7. Gid2 (usim) .open
    block 4
    5. Mcc+mnc (usim) .open 6. Gid1 (usim) .open 7. Gid2 (usim) .open
    block 5
    5. Mcc+mnc (usim) .open 6. Gid1 (usim) .open 7. Gid2 (usim) .open
    block 6
    5. Mcc+mnc (usim) .open 6. Gid1 (usim) .open 7. Gid2 (usim) .open
    block 7
    5. Mcc+mnc (usim) .open 6. Gid1 (usim) .open 7. Gid2 (usim) .open
    
    phone is unlocked
    full factory reset started...
    Operation done.
    Full factory reset started...
    Operation done. 





    :hmm:
     

Share This Page