Nokia 103 Conser

Discussion in 'DCT-4' started by Puspa Media, Oct 22, 2013.

  1. Puspa Media

    Puspa Media New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Mauk servisan Nokia 103 Conser boss, log dengan ATF
    VBATT Powering Down <<<<
    VBATT Powering Up >>>>
    SET VCCIO Level Done
    SET BSI Load Done

    Booting Phone...
    CPU ID Response: A200341100
    CPU Type: XG110 2.1B
    Phone Booted at after First attempt...

    ******************************************************
    TIME STARTS HERE
    ******************************************************


    Sending PBL 19456 bytes...
    PBL Successfully Sent...

    Sending SBL 65024 bytes...
    SBL Successfully Sent...

    Flash Chip Manufacturer: Samsung Electronics Corp.
    Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
    Extended Information: Multiple Bank / Burst / 1.8v

    Processing Image File: F:\Products\RM-647\rm647_006.200

    FIRMWARE Image Found...
    Number of Sections: 03
    FIRMWARE Certificate Block Sent Successfully...
    Processing Section 01 of 03
    FIRMWARE Erase Block: 0x00800000~0x00A0FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 2162688 bytes
    Data Checksum: 0E71
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 02 of 03
    FIRMWARE Erase Block: 0x00C60000~0x00EAFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 2020800 bytes
    Data Checksum: 0C57
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 03 of 03
    FIRMWARE Erase Block: 0x00FFC000~0x00FFFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 64 bytes
    Data Checksum: 0000
    Uploading Data Blocks to phone...
    FIRMWARE Data Blocks uploaded to phone...
    Start Data Verification... (Please wait)
    Data Verification Successful...


    Processing Image File: F:\Products\RM-647\rm647_006.20me

    PPM Image Found...
    Number of Sections: 01
    PPM Certificate Block Sent Successfully...
    Processing Section 01 of 01
    PPM Erase Block: 0x00210000~0x0032CBBE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 1166272 bytes
    Data Checksum: 8886
    Uploading Data Blocks to phone...
    PPM Data Blocks uploaded to phone...
    Start Data Verification... (Please wait)
    Data Verification Successful...


    Processing Image File: F:\Products\RM-647\rm6470_nai06.20me

    CONTENT Image Found...
    Number of Sections: 01
    CONTENT Certificate Block Sent Successfully...
    Processing Section 01 of 01
    CONTENT Erase Block: 0x00EB0000~0x00EFBA3E
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 309824 bytes
    Data Checksum: C132
    Uploading Data Blocks to phone...
    CONTENT Data Blocks uploaded to phone...
    Start Data Verification... (Please wait)
    Data Verification Successful...


    Exit Flash Mode Done...
    Time Elapse : 00:01:44

    ******************************************************
    You must Factory Reset the phone to enable the
    ringtones and other customized settings to work
    ******************************************************


    Waiting For Phone to go Online...

    5, 4, 3, 2, 1...
    MCU: V 06.20 01-12-10 RM-647 (c) Nokia
    IMEI: 354861049035741
    Product Serial Number: 47D29F0AI
    Product Code : 0592239
    Module Code : 0204426
    Basic Production Code: 059C7H2
    PPM SW Version : V 06.20 01-12-10 RM-647 (c) Nokia ME
    ADSP Version : p V 06.20\n01-12-10\nRM-647\n(c) NMP\nme
    MCU SW Version : V 06.20 01-12-10 RM-647 (c) Nokia
    HW Version : 3001
    UEM Version : 1328
    UPP Version : 8850
    LCD Version : UNKWN: IDs: 00:00:00
    ********** SIMLOCK INFO **********
    CONFIG_DATA : 0000000000000000
    PROFILE_BITS : 0000000000030000
    ASIC : 11
    PROVIDER : Unknown Provider

    Unable to read SP Data..

    ST_LCD_TEST : FAILED

    Phone Cannot Enter Normal Mode if LCD
    is Damaged or LCD is not Properly
    Connected to the Main PCB


    FACTORY SET TO : Full Factory Set
    OK
    FACTORY SET TO : User Data
    OK
    FACTORY SET TO : Leave Factory
    OK
    FACTORY SET TO : Service Center
    OK
    FACTORY SET TO : Software Upgrade
    OK
    FACTORY SET TO : Production Tune
    OK

    kira2 bisa tidak diperbaiki SP Datanya, trims boss ....
     

Share This Page