Nokia 1280 blank putih setelah salaman.

Discussion in 'Nokia ODM' started by tomlatu, Oct 31, 2013.

  1. tomlatu

    tomlatu Well-Known Member

    Messages:
    305
    Likes Received:
    141
    Trophy Points:
    53
    Nokia 1280, blank putih setelah salaman.
    di flash pake ufs ok, tapi tetap tidak ada perubahan.
    di flash pake mxkey, sama saja, cuma pd log flash mxkey ada baris yang "Errorreading checksum" dan "Checksum mismatch:....".
    minta solusi oom.. mungkin ada yg tahu..!
    log flash mxkey:
    Code:
    Backup already exists(C:\mobileEx\3.5.2.5\data\backup\XGOLD_RM-647_35F0DB77CB4A7641_IMEI.back)
    MXKEY [B][MxKey Team HTI Flasher Interface (WinUSB) 0][/B], SN: [B]C0853173[/B]
    Using device: [B]HTI[/B], FW ver: [B]00.50[/B], SN: [B]000034B0[/B]
    Connection status: [B]EHCI:HUB:HUB:HUB:HUB:HUB:USB 2.00 (Full-speed)[/B]
    Driver: [B]WinUSB[/B], ver: [B]3.5.1.0 [/B], NTMP ver: [B]6.1.7600.16385[/B]
    Module ver: [B]1.0.0.21313[/B]([B]12-12-2012[/B]), Library ver: [B]1.0.0.14337[/B]([B]12-12-2012[/B])
    Device synchronized.
    CPU: [B]XGOLD 110[/B]
    [B] Using embedded SBL from MCU.[/B]
    Sending EBL Loader ...OK
    Sending EBL ...OK
    Getting EBL Version ...
     Boot mode: [B]0xCC[/B]
     EBL version major/minor: [B]10.19[/B]
     EBL version: [B]Default_RAM_Bootloader[/B]
    Set baud rate to: [B]921.60 Kbit/s[/B]
    Flash ID: [B]0020 88C0 - 23280003 [ST M58MWR064FU,64 Mbits][/B]
    CFI information:
     Flash settings: 0/1, size: 0x00800000
     2 Block regions:
      127 x 0x00010000 = 0x007F0000
      8 x 0x00002000 = 0x00010000
    [B]EBL ready ![/B]
    [U]Processing file: [B]rm647_004.200[/B][/U]
     Downloading item [B]CODE:hw_b2_rm647_r04.200.fls[/B], num block: [B]3[/B], size: [B]3.98 MB[/B]
    Erasing area [B]0x00800000-0x00A0FFFE[/B] ...OK
    Programming completed in 41.290 s
    Erasing area [B]0x00C60000-0x00E4A1FE[/B] ...OK
    Programming completed in 38.220 s
    Erasing area [B]0x00FFC000-0x00FFC03E[/B] ...OK
    Programming completed in 0.140 s
    [B]Error reading checksum![/B]
    [U]Processing file: [B]rm647_004.20md[/B][/U]
     Downloading item [B]CUST:hw_b2_rm647_004.20md.fls[/B], num block: [B]1[/B], size: [B]1.33 MB[/B]
    Erasing area [B]0x00210000-0x00362C7E[/B] ...OK
    Programming completed in 20.100 s
    [B]Checksum mismatch: Phone calculated 0x0037, software calculated 0xD00D[/B]
    [U]Processing file: [B]rm6470_nai04.20md[/B][/U]
     Downloading item [B]CUST:hw_b2_rm6470_nai04.20md.fls[/B], num block: [B]1[/B], size: [B]311.02 KB[/B]
    Erasing area [B]0x00EB0000-0x00EFCEFE[/B] ...OK
    Programming completed in 4.490 s
    [B]Checksum mismatch: Phone calculated 0x00F0, software calculated 0x45E2[/B]
    Total time for flashing process(boot+erase+write) was [B]3 min 3.451 s[/B]
     
     
    Phone type: [B]RM-647 [/B]
    SW version: [B]V 04.20 [/B][B]07-05-10[/B][B] RM-647 (c) Nokia [/B]
    Imei plain: [B]35825104763784-5[/B]
    Product code: [B]0593073[/B]
    Cellular system: [B]GSM[/B]
    ASIC ID: [B]0x2292[/B], type: [B]11[/B]
    Ppm Id: [B]MD[/B]
    [B]Language Pack:[/B]
    English,Filipino,Vietnamase
     
     
    Imei net: [B]35825104763784[/B]
    Provider: [B]GSM Test Operator[/B]
    Counter: 0/3, 0/10
     
    CONFIG_DATA: [B]0010100000000000[/B]
    PROFILE_BITS: [B]0000000000030002[/B]
     
    BLOCK1: 1=[B]OPEN[/B], 2=[B]OPEN[/B], 3=[B]OPEN[/B], 4=[B]OPEN[/B], 5=[B]OPEN[/B]
    BLOCK2: 1=[B]OPEN[/B], 2=[B]OPEN[/B], 3=[B]OPEN[/B], 4=[B]OPEN[/B], 5=[B]OPEN[/B]
    BLOCK3: 1=[B]OPEN[/B], 2=[B]OPEN[/B], 3=[B]OPEN[/B], 4=[B]OPEN[/B], 5=[B]OPEN[/B]
    BLOCK4: 1=[B]OPEN[/B], 2=[B]OPEN[/B], 3=[B]OPEN[/B], 4=[B]OPEN[/B], 5=[B]OPEN[/B]
    BLOCK5: 1=[B]OPEN[/B], 2=[B]OPEN[/B], 3=[B]OPEN[/B], 4=[B]OPEN[/B], 5=[B]OPEN[/B]
    BLOCK6: 1=[B]OPEN[/B], 2=[B]OPEN[/B], 3=[B]OPEN[/B], 4=[B]OPEN[/B], 5=[B]OPEN[/B]
    BLOCK7: 1=[B]OPEN[/B], 2=[B]OPEN[/B], 3=[B]OPEN[/B], 4=[B]OPEN[/B], 5=[B]OPEN[/B]
     

Share This Page