Info Update RIFF JTAG dan testimoni

Discussion in 'Flasher-Box' started by jogjaflasher_com, Apr 13, 2014.

Thread Status:
Not open for further replies.
  1. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Sedia kembali 13 April 2014 (kelanjutan dari link http://forum.djawir.com/flasher-box-214/jual-riff-jtag-legija-info-update-114960/index3.html )

    RIFF JTAG
    + kelengkapan bawaan (kabel 2 buah + pcb + keterangan pinout)
    + 50an GB file dump dll (optional)


    [​IMG]

    [​IMG]

    [​IMG]

    dikutip dari https://www.facebook.com/photo.php?fbid=301409556683514&set=gm.723737991020453&type=1
    Harga ada di link group FB diatas.
     
    Last edited by a moderator: Jun 10, 2014
  2. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Re: Info Updte RIFF JTAG

    Sambungan dari halaman http://forum.djawir.com/flasher-box-214/jual-riff-jtag-legija-info-update-114960/index3.html

    RIFF JTAG – Easy repair HTC One mini LTE 601n (HTC M4) supported

    Repairing bricked HTC OneMini (PO5820000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
    In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
    Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.19.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PO5820000’.

    To resurrect HTC OneS:

    Solder JTAG cable to HTC OneMini (PO5820000) JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure HTC OneMini (PO5820000) is selected in the list of models;
    If you use battery, press Power On key;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold ‘Volume Down’ key and press ‘Power ON’ button.

    [​IMG]
     
    Last edited by a moderator: Apr 14, 2014
  3. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Re: Info Updte RIFF JTAG

    RIFF JTAG – Easy repair Huawei Ascend G525-U00 supported

    Repairing bricked Huawei G525 is easy with the RIFF Box.

    To resurrect Huawei G525:

    Solder JTAG cable to Huawei G525 JTAG pads;
    Connect Huawei G525 tablet’s charger for power;
    Make sure Huawei G525 is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    De-solder JTAG wires;

    Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

    [​IMG]
     
    Last edited by a moderator: Apr 14, 2014
  4. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Re: Info Updte RIFF JTAG

    RIFF JTAG - Easy repair LG E980 Optimus G Pro 5.5 4G LTE supported

    Repairing bricked LG E980 with the RIFF Box requires non-beginner
    soldering skills (since JTAG pads on board are very small and are
    close to each other).
    Phone is auto powered on with USB Data Cable connected to the PC while
    battery is inserted. Please note, battery must be charged. If battery
    is not charged enough there is chance of getting 0×42 error during
    connection stage.

    To resurrect LG E980:

    Solder JTAG cable to LG E980 JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure LG E980 is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods

    To enter emergency mode:


    Disconnect PC cable;
    Insert battery;
    Hold both 'Volume down' and 'Camera' keys and press 'Power ON' button.

    [​IMG]
     
  5. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Re: Info Updte RIFF JTAG

    RIFF JTAG - Easy repair Sony Xperia S LT26 / LT26i / Arc HD (Sony Nozomi) supported

    Repairing bricked SE LT26i is easy with the RIFF Box. Phone is auto
    powered on with USB Data Cable connected to the PC. Battery presence
    may be required.
    In case you have no USB cable near, make sure battery is charged
    enough and hold Power On button during initiation of JTAG connection.

    To resurrect SE LT26i:

    Solder JTAG cable to SE LT26i JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure SE LT26i is selected in the list of models;
    If you use battery, press Power On key;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods.

    [​IMG]
     
  6. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Re: Info Updte RIFF JTAG

    RIFF JTAG - Easy repair Sony Xperia TX LT29 / Xperia T LT29i (Sony
    Hayabusa) supported


    Repairing bricked SE LT29i is easy with the RIFF Box. Phone is auto
    powered on with USB Data Cable connected to the PC while battery is
    connected.

    To resurrect SE LT29i:

    Solder JTAG cable to SE LT29i JTAG pads;
    Insert batter and connect USB Data cable;
    Make sure SE LT29i is selected in the list of models;
    If you use only battery, press Power On key;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally you can flash it using known flashing methods.

    [​IMG]
     
  7. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Re: Info Updte RIFF JTAG dan testimoni


    RIFF JTAG - Easy repair Sony Xperia Miro ST23 / ST23i (Sony Mesona) supported


    Repairing bricked SE ST23i is easy with the RIFF Box. Phone is auto
    powered on with USB Data Cable connected to the PC. Battery presence
    may be required.
    In case you have no USB cable near, make sure battery is charged
    enough and hold Power On button during initiation of JTAG connection.

    To resurrect SE ST23i:

    Solder JTAG cable to SE ST23i JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure SE ST23i is selected in the list of models;
    If you use battery, press Power On key;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods.

    [​IMG]
     
  8. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    Re: Info Updte RIFF JTAG

    RIFF JTAG - Easy repair LG F240L Optimus G Pro 5.5 supported

    Repairing bricked LG F240L with the RIFF Box requires non-beginner
    soldering skills (since JTAG pads on board are very small and are
    close to each other).
    Phone is auto powered on with USB Data Cable connected to the PC while
    battery is inserted. Please note, battery must be charged. If battery
    is not charged enough there is chance of getting 0×42 error during
    connection stage.

    To resurrect LG F240L:

    Solder JTAG cable to LG F240L JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure LG F240L is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods.

    [​IMG]
     
  9. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
  10. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair LG P714 Optimus L7 II supported

    Repairing bricked LG P714 is easy with the RIFF Box. But it requires
    non-beginner soldering skills (since JTAG pads on board are very small
    and are close to each other).

    To resurrect LG P714:

    Solder JTAG cable to LG P714 JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure LG P714 is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods.

    [​IMG]
     
  11. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Samsung GT-i8730 Galaxy Express supported

    Repairing bricked Samsung I8730 is easy with the RIFF Box.
    Note, one simple way to connect over JTAG - connect USB cable to PC
    and insert battery. In this case phone is automatically powered on.

    To resurrect Samsung I8730:

    Solder JTAG cable to Samsung I8730 JTAG pads;
    Connect USB cable to phone and PC;
    Insert battery;
    Make sure Samsung I8730 is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using original Samsung downloader
    software to restore it to the working state.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold 'Volume Down' key and press Power-On.
    [​IMG]
     
  12. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Samsung Galaxy Tab 7.7 Plus SC-01E supported

    Repairing bricked Samsung SC-01E is easy with the RIFF Box. The device
    is based on the 2nd-generation Qualcomm MSM8260 chipset.
    Note, one simple way to connect over JTAG - connect USB cable to PC
    and insert battery. In this case phone is automatically powered on.

    To resurrect Samsung SC-01E:

    Solder JTAG cable to Samsung SC-01E JTAG pads;
    Connect USB cable to phone and PC;
    Insert battery;
    Make sure Samsung SC-01E is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using original Samsung downloader
    software to restore it to the working state.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold 'Volume Down' key and press Power-On.

    [​IMG]
     
  13. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Sony Xperia Tipo Dual ST21i2 (Sony Tapioca DS) supported

    Repairing bricked SE ST21i2 is easy with the RIFF Box. Phone is auto
    powered on with USB Data Cable connected to the PC. Battery presence
    may be required.
    In case you have no USB cable near, make sure battery is charged
    enough and hold Power On button during initiation of JTAG connection.

    To resurrect SE ST21i2:

    Solder JTAG cable to SE ST21i2 JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure SE ST21i2 is selected in the list of models;
    If you use battery, press Power On key;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods.

    [​IMG]
     
  14. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Mars Mission One teams up with RIFF Box team !

    We're proud to announce that RIFF Box Team was selected to be main
    supplier of communication and robotronics servicing equipment for
    upcoming Mars One mission.
    We were selected out of 5 other (obviously) inferior teams, and we
    already started with developing required procedures and hardware
    designs.

    Robotics and Mechatronics departments will be equipped with
    self-repair devices developed by members of our team, and some ideas
    will be borrowed from our engagement on first version of Death Star.
    We were recommended by both Emperor Palpatine and Darth Vader.

    [​IMG]
     
  15. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Samsung GALAXY Tab 10.1 LTE SC-01D supported

    Repairing bricked Samsung SC-01D is easy with the RIFF Box. The device
    is based on the 2nd-generation Qualcomm MSM8260 chipset.
    Note, one simple way to connect over JTAG - connect USB cable to PC
    and insert battery. In this case phone is automatically powered on.

    To resurrect Samsung SC-01D:

    Solder JTAG cable to Samsung SC-01D JTAG pads;
    Connect USB cable to phone and PC;
    Insert battery;
    Make sure Samsung SC-01D is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using original Samsung downloader
    software to restore it to the working state.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold 'Volume Down' key and press Power-On.

    [​IMG]
     
  16. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Samsung Galaxy Trend (S7560) supported

    Repairing bricked Samsung S7560 is easy with the RIFF Box.
    Note, one simple way to connect over JTAG - connect USB cable to PC
    and insert battery. In this case phone is automatically powered on, so
    no need to press any power-on buttons on the phone keypad.

    To resurrect Samsung S7560:

    Solder JTAG cable to Samsung S7560 JTAG pads;
    Insert USB Data cable into board and PC;
    Make sure Samsung S7560 is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold 'Volume Down' and 'Home' keys and press Power-On.

    [​IMG]
     
  17. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Samsung Galaxy S4T L720T supported

    Repairing bricked Samsung L720T is easy with the RIFF Box.
    Phone is auto powered on with USB Data Cable connected to the PC while
    battery is inserted. Please note, battery must be charged. If battery
    is not charged enough there is chance of getting 0×42 error during
    connection stage.
    During Resurrection process you can select areas to be resurrected.
    Select them wisely: selecting everything in one bunch may just
    increase flashing time while it's possible that all you need is to
    repair only few certain areas.

    To resurrect Samsung L720T:

    Solder JTAG cable to Samsung L720T JTAG pads;
    Connect USB cable or insert battery;
    Make sure Samsung L720T is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using known flashing methods.

    [​IMG]
     
  18. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Samsung Galaxy Mega 6.3 I9200 supported

    Repairing bricked Samsung I9200 is easy with the RIFF Box.
    Note, one simple way to connect over JTAG - connect USB cable to PC
    and insert battery. In this case phone is automatically powered on.
    During Resurrection process you can select areas to be resurrected.
    Select them wisely: selecting everything in one bunch may just
    increase flashing time while it's possible that all you need is to
    repair only few certain areas.

    To resurrect Samsung I9200:

    Solder JTAG cable to Samsung I9200 JTAG pads;
    Connect USB cable to phone and PC;
    Insert battery;
    Make sure Samsung I9200 is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using original Samsung downloader
    software to restore it to the working state.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold 'Volume Down' key and press Power-On.

    [​IMG]
     
  19. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73
    RIFF JTAG - Easy repair Samsung Galaxy S III mini SM-G730V supported

    Repairing bricked Samsung G730V is easy with the RIFF Box. The device
    is based on the Qualcomm MSM8960 chipset.
    Note, one simple way to connect over JTAG - connect USB cable to PC
    and insert battery. In this case phone is automatically powered on.

    To resurrect Samsung G730V:

    Solder JTAG cable to Samsung G730V JTAG pads;
    Connect USB cable to phone and PC;
    Insert battery;
    Make sure Samsung G730V is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using original Samsung downloader
    software to restore it to the working state.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold 'Volume Down' key and press Power-On.

    [​IMG]
     
  20. jogjaflasher_com

    jogjaflasher_com Well-Known Member Product Supporter

    Messages:
    1,860
    Likes Received:
    227
    Trophy Points:
    73

    RIFF JTAG - Easy repair LG Optimus Vu(F100L) supported


    Repairing bricked LG F100L is easy with the RIFF Box.
    Note, one simple way to connect over JTAG - connect USB cable to PC
    and insert battery. In this case phone is automatically powered on.

    To resurrect LG F100L:

    Solder JTAG cable to LG F100L JTAG pads;
    Connect USB cable to phone and PC;
    Insert battery;
    Make sure LG F100L is selected in the list of models;
    Click Resurrect button;
    Wait till software signals a successful operation completion;
    Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start
    up normally, you can flash it using original Samsung downloader
    software to restore it to the working state.

    To enter download mode:

    Disconnect PC cable;
    Insert battery;
    Hold 'Volume Down' key and press Power-On.


    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page